Abstract:The MAX phase has attracted much attention due to its unique properties combined with the merits of both metal and ceramic, including the low density, high electrical conductivity and good oxidation resistance, which makes it significant for possible applications in various high temperature or other environments. There is a lot of research work on Ti2AlX (X=C, N). However little research about thermodynamic properties at high pressure is carried out. So we study the structural, mechanical and thermodynamic properties of Ti2AlC and Ti2AlN at various pressures and temperatures. The first-principles calculations based on electronic density-functional theory framework are used to investigate the properties at various pressures. The cut-off energy is 350 eV. Converged results are achieved with 10102 special K-point meshes. The self-consistent convergence of total energy is set to be 5.010-6 eV/atom. According to the calculated structural parameters at various pressures, we can find that the ratios V/V0 (V0 denotes the system volume at 0 GPa) of Ti2AlX are reduced by 20.59% and 18.93%, respectively, so the compressibility of the system is strong. As the internal pressure increases, the curves of V/V0 become gentle. Then we calculate elastic constants at pressures ranging from 0 to 50 GPa in steps of 10 GPa. It is obvious that the Ti2AlX is mechanically stable because all of the elastic constants satisfy the Born stability criteria. The bulk modulus, shear modulus and Young's modulus linearly increase with internal pressure increasing, implying that the pressure can improve the resistance to volume deformation. The ductility and brittleness can be judged according to Pugh's criterion (ratio of bulk modulus to shear modulus B/G), and the brittle nature turns into ductile nature in a pressure range of 40-50 GPa for the Ti2AlX since the value of B/G exceeds 1.75. Finally, we study the thermodynamic properties at various pressures and temperatures based on the quasi-harmonic Debye approximation theory, including the bulk modulus, heat capacity and thermal expansion coefficient. The bulk modulus decreases with temperature increasing but increases with pressure increasing. The heat capacity at constant volume Cv and the heat capacity at constant pressure Cp have the same variation tendency, while Cv obeys the Dulong-Petit limit. It is easy to see that temperature and pressure have opposite influences on heat capacity and the effect of temperature is more significant than that of pressure. The effects of temperature and pressure on linear expansion coefficient mainly occur at low temperature and the effect of pressure is not so considerable when the pressure exceeds 30 GPa. Above all, the effects of temperature and pressure on thermodynamic properties are inverse.

The Thermodynamic Stability and Mechanical Properties of TiC X N1−x (0 ⩽ X ⩽ 1) Compounds by Cluster Expansion Method and First-Principles Calculations

First-Principles Study on the Mechanical Properties and Electronic Structure of Nonstoichiometric TiC(1−x)Nx

Theoretical Investigation of the High Pressure Structure, Lattice Dynamics, Phase Transition, and Thermal Equation of State of Titanium Metal

First Principles Studies on the Elastic, Thermodynamic Properties and Electronic Structure of Ti15−xMoxSn Compounds

First-principles calculations to investigate mechanical and thermodynamics properties of multi-anion oxycarbonitride ceramics TiCNO and TiZrCNO

Structural, Mechanical, and Thermodynamic Properties of Ti2AlX (X = C, N) at High Pressure

A first-principles study of the stability and mechanical properties of ternary transition metal carbide alloys

First-Principle Study on the Stability of Lightly Doped (nb1–xtix)c Complex Carbides and Their Verification in 1045 Steel

First-Principles Investigation into the Structural Stability of Icosahedral Ti12x Clusters (X = B, C, N, Al, Si, P, V, Cr, Mn, Fe, Co and Ni)

Phase stability, chemical bonding and mechanical properties of titanium nitrides: a first-principles study

Structure, stability and optical absorption spectra of small Ti$_n$C$_x$ clusters: a first-principles approach

First-Principles Calculate the Stability, Mechanical Properties and Electronic Structure of Carbide MC, M2C and M6C in M50NiL Steel

Screen the elastic and thermodynamic properties of MAX solid solution using DFT procedue: Case study on (Ti1-xVx)2AlC

Structures and Properties of $β$-Titanium Doping Trace Transition Metal Elements: a Density Functional Theory Study

Stability and mechanical properties of single-phase quinary high-entropy metal carbides: First-principles theory and thermodynamics

Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study

Phase stability and elastic properties in the $Al_{1-x-y}Cr_{x}Ti_{y}N$ system from first principles

Theoretical investigation the effect of A-site elements on mechanical and thermal properties in Ti 2 AC (A = Al, Ga, In, Si, Ge, Sn) compounds

Understanding the electronic structure, mechanical properties, and thermodynamic stability of (TiZrHfNbTa)C combined experiments and first-principles simulation

Frist-principles prediction of elastic, electronic, and thermodynamic properties of high entropy carbide ceramic (TiZrNbTa)C

First principles calculation on electronic structures and mechanical properties of TiCrTaV high–entropy alloy