Compact Five-mode De-multiplexer based on Grating Assisted Asymmetric Directional Couplers

Simei Mao,Lirong Cheng,Sailong Wu,Xin Mu,Xin Tu,Qian Li,H.Y. Fu

DOI: https://doi.org/10.1364/acpc.2020.m4a.128

2020-01-01

Abstract:We propose a 25-μm five-mode de-multiplexer based on subwavelength grating directional couplers with constant bus waveguide. The insertion loss is less than 0.31 dB at 1550 nm and its 1-dB bandwidth is over 100 nm.

What problem does this paper attempt to address?

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

Jinbiao Xiao,Xu Liu,Xiaohan Sun

DOI: https://doi.org/10.1364/oe.15.008300

IF: 3.8

2007-01-01

Optics Express

Abstract:Based on a multimode interference (MMI) coupler in slot waveguide structures, an ultracompact wavelength demultiplexer operating at 1.30 and 1.55mum wavelengths is proposed and designed by using a full-vector mapped Galerkin mode solver and a modified three-dimensional full-vector beam propagation method. The tapered waveguide structures are applied to connect the input/output channels and the MMI section for reducing excess loss. The modal characteristics of the slot waveguides are analyzed and the evolution of the injected field in whole device are demonstrated. The results show that a MMI section of 119.8mum in length, which is only 27.5% length of that of the MMI coupler by using conventional rib waveguides, is achieved with the contrasts of 26.03 and 28.14dB at wavelengths 1.30 and 1.55mum, respectively, and the insertion losses are below 0.2dB at both wavelengths.
A Nonreciprocal Add-Drop Multiplexer Based on Grating Assisted Couplers

Huiye Qiu,Ting Hu,Ping Yu,Ying Wang,Xiaoqing Jiang

DOI: https://doi.org/10.1016/j.ijleo.2015.07.195

IF: 3.1

2015-01-01

Optik

Abstract:We propose a nonreciprocal optical add-drop multiplexer with silicon waveguide, which is realized by grating assisted coupler employing magneto-optical nonceciprocal phase shift. This device can achieve different adding or dropping peak wavelengths when light is launched in the forward-directed and backward-directed propagation. The calculation results show that the shift of the different dropping peak wavelengths is up to 0.7nm. Also, we demonstrate its applications for narrowband optical isolators and circulators. This work demonstrates that on-chip nonreciprocal optical add-drop multiplexers and optical isolations can be implemented with the proposed device, which has promising applications for optical communication systems and photonic integrated devices.
Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

Yiwei Xie,Songnian Fu,Hai Liu,Hailiang Zhang,Ming Tang,P. Shum,Deming Liu

DOI: https://doi.org/10.1088/2040-8978/15/12/125404

IF: 2.1

2013-01-01

Journal of Optics

Abstract:Mode division multiplexing (MDM) transmission based on few-mode fibers (FMFs) appears to be an alternative solution for overcoming the capacity limit of single-mode fibers (SMFs). A FMF coupler-based mode division multiplexer/demultiplexer (MMUX/DeMMUX) is proposed and theoretically investigated after the fabricated FMF is characterized. MMUXs/DeMMUXs with a mode contrast ratio (MCR) of more than 20 dB can be obtained for two-mode multiplexing and three-mode multiplexing over a wavelength span of 60 and 10 nm, respectively. We numerically verify the proposed MMUX/DeMMUX which has the advantages of high MCR, easy fabrication and maintenance, and low wavelength dependence.
Silicon Mode Multi/Demultiplexer Based on Multimode Grating-Assisted Couplers

Huiye Qiu,Hui Yu,Ting Hu,Guomin Jiang,Haifeng Shao,Ping Yu,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/oe.21.017904

IF: 3.8

2013-01-01

Optics Express

Abstract:A simple and low-crosstalk 1 × 4 silicon mode (de)multiplexer based on multimode grating-assisted-couplers is proposed. Mode transitions can be flexibly controlled by designing the grating period at the phase-matching condition. Due to the contra-directional coupling, precise control of the coupling strength and the coupling length are not needed in the system. Calculation results show that the insertion loss and the 3 dB bandwidths of the device are 0.2 dB and 3.7 nm, 0.34 dB and 7.6 nm, and 0.21 dB and 11.8 nm for the channels which (de)multiplex to the 1st, 2nd, and 3rd modes of the bus waveguide, respectively.
Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Xiaofei Wang,Nannan Ning,Hui Yu,Yuehai Wang,Jianyi Yang

DOI: https://doi.org/10.1364/ol.449493

2021-01-01

Abstract:Asymmetrical directional couplers aided with subwavelength sidewall corrugations are used to realize ultra-compact silicon mode (de)multiplexers at C-band. Three mode (de)multiplexers with ultra-short coupling lengths of 5.6/6.5/7.7 μm are designed to enable low-loss mode conversions between TE0 and TE1/2/3 modes. They are then cascaded to build a four-channel mode-division-multiplexing (MDM) link. The four mode channels present minimal on-chip insertion losses of 0.2/0.7/0.7/0.9 dB at their peak wavelengths. Measured cross talk levels of the four mode channels are better than -18.0/-19.1/-16.0/-18.2 dB within the wavelength range from 1530 nm to 1580 nm.
Compact Hybrid Five-Mode Multiplexer Based on Asymmetric Directional Couplers with Constant Bus Waveguide Width

Simei Mao,Lirong Cheng,Caiyue Zhao,Yinghui Wang,Qian Li,H. Y. Fu

DOI: https://doi.org/10.1364/ol.486080

IF: 3.6

2023-01-01

Optics Letters

Abstract:We experimentally demonstrate a hybrid mode division mul-tiplexer (MDM) based on asymmetric directional couplers (ADCs) without transition tapers in between. The pro-posed MDM can couple five fundamental modes from access waveguides into the bus waveguide as the hybrid modes (TE0, TE1, TE2, TM0, and TM1). To eliminate the transition tapers between cascaded ADCs as well as to enable arbitrary add -drop to the bus waveguide, we maintain the bus waveguide width to be the same, while a partially etched subwavelength grating is introduced to reduce the effective refractive index of the bus waveguide. The experimental results demonstrate a working bandwidth of up to 140 nm.(c) 2023 Optica Pub-lishing Group
High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Xiangyu Luo,Guangcan Mi,Yanbo Li,Tao Chu

DOI: https://doi.org/10.1364/ol.452054

IF: 3.6

2022-01-01

Optics Letters

Abstract:We experimentally demonstrated a high-efficiency grating coupler by combining an interleaved etch and apodized structure for fiber-to-chip coupling. The grating coupler was optimized using the fast directional optimization method to achieve apodization. The grating coupler utilized a layout strategy involving an extended mask to avoid alignment errors for a multi-etch structure. The coupling efficiency was measured to be -2.2 dB at a wavelength of 1549 nm with a 3 dB bandwidth of 47 nm. The grating coupler, having no gold reflector, subwavelength index matching structure, or additional material layers, was fabricated using a commercial silicon photonics process with a minimum feature size of 140 nm. This grating coupler design provides a robust and effective coupling scheme and the proposed method can be employed to adopt the design in accordance with standard foundry design rules.
Ultrabroadband and Fabrication-Tolerant Mode (de)multiplexer Using Subwavelength Structure

Weifeng Jiang,Jinye Miao,Tao Li,Lianhao Ma

DOI: https://doi.org/10.1364/josab.36.003125

2019-01-01

Journal of the Optical Society of America B

Abstract:An ultrabroadband and fabrication-tolerant mode (de)multiplexer [(De)MUX] is proposed and optimized by inserting subwavelength gratings (SWGs) into a three-waveguide coupler (TWC). The coupling strength can be dramatically enhanced, benefitting from both the SWG and TWC structures. The proposed mode (De)MUX is optimized using a three-dimensional, full-vectorial finite difference time domain based band diagram and propagation analyses. The simulated results indicate that the optimal mode (De)MUX is with a compact coupling length of 14.75 mu m a low loss of 0.64 dB, and a low mode crosstalk of -31.7 dB at the operating wavelength of 1.55 mu m. With the mode crosstalk < -15.0 dB, an ultrabroad bandwidth of 312 nm and a relaxed fabrication tolerance of -42.7 nm to +36.5 nm can be achieved. The 3 dB bandwidth is over 320 nm and the insertion loss is less than 1.6 dB for a +/- 50 nm width change. (C) 2019 Optical Society of America
An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

shen ao,qiu chen,hu ting,xu chao,jiang xiaoqing,li yubo,yang jianyi

DOI: https://doi.org/10.1088/0256-307X/30/8/084204

2013-01-01

Chinese Physics Letters

Abstract:An eight-channel 400 GHz-spacing planar waveguide multi/demultiplexer employing etched diffraction grating is designed and fabricated on a silicon-on-insulator platform with a 220 nm thick top layer. The design parameters are optimized by scalar diffraction simulation to obtain optimal performance with a small footprint of only 0.75 mm(2). A bi-level adiabatic taper is used to connect the input/output waveguide and the slab waveguide so as to reduce the insertion loss and the broadening of the diffraction angle of the propagating light. The device is fabricated in a two-step process with E-beam lithography and dry etching, and the alignment accuracy is 10 nm or even better. Measurements show that the insertion loss is 7.35 dB and the crosstalk between adjacent channels is about -15 dB. Ways to improve the performance are also investigated in detail.
Compact and broadband mode multiplexer and demultiplexer based on asymmetric plasmonic-dielectric coupling.

Mei Yin,Qingzhong Deng,Yanping Li,Xingjun Wang,Hongbin Li

DOI: https://doi.org/10.1364/AO.53.006175

IF: 1.9

2014-01-01

Applied Optics

Abstract:A compact and broadband mode (de) multiplexer utilizing the asymmetrical directional coupling between a hybrid plasmonic waveguide and a silicon nanowire waveguide is proposed. The coupling length is 13.6 mu m, which is the shortest in TE0 and TE1 mode multiplexers reported, to the best of our knowledge. It shows a high mode conversion efficiency of 99.2% with excess loss of only 0.35 dB at 1550 nm. The mode multiplexing circuit exhibits a low crosstalk of less than -17 dB over a large bandwidth of 100 nm. (C) 2014 Optical Society of America
Compact Dense Wavelength-Division (de)multiplexer Utilizing a Bidirectional Arrayed-Waveguide Grating Integrated with a Mach–Zehnder Interferometer

Sitao Chen,Xin Fu,Jian Wang,Yaocheng Shi,Sailing He,Daoxin Dai

DOI: https://doi.org/10.1109/jlt.2015.2405510

IF: 4.7

2015-01-01

Journal of Lightwave Technology

Abstract:A compact wavelength-division (de)multiplexer is proposed and demonstrated experimentally to achieve doubled channel number and halved channel spacing by utilizing a bidirectional arrayed-waveguide grating integrated with an Mach-Zehnder interferometer optical interleaver. As an example, an 18-channel wavelength-division (de)multiplexer with a channel spacing of 200 GHz is designed and fabricated. The measured excess loss is about 8 dB and the channel crosstalk is -15 ~ -18 dB. The footprint of this fabricated (de)multiplexer is about 520 μm × 190 μm.
Fiber-Chip Bi-Wavelength Multiplexing with Subwavelength Single-Etch Grating Coupler and Diplexer

Lirong Cheng,Simei Mao,Yinghui Wang,H. Y. Fu

DOI: https://doi.org/10.1109/jphot.2022.3143689

IF: 2.4

2022-01-01

IEEE Photonics Journal

Abstract:We propose a silicon photonicgrating coupling scheme for dual-band multiplexing in optical fibers. By utilizing subwavelength grating effective refractive index engineering, a dual-band operating grating coupler and a wavelength-polarization diplexer are designed. Both devices are fabricated on a 220-nm silicon-on-insulator and require only one 220-nm full etch step to facilitate cost-effective production. The subwavelength grating coupler guides S-band and O-band lights from a single-mode fiber into a waveguide as transverse-electric and transverse-magnetic modes, while the subwavelength diplexer separates the two signals into two waveguides. Experimentally, our proposed scheme for coupling and multiplexing can achieve a total insertion loss of –4.26 dB at near 1490 nm and –5.86 dB at near 1310 nm.
Novel Dispersive and Focusing Device Configuration Based on Curved Waveguide Grating (CWG).

Yinlei Hao,Yaming Wu,Jianyi Yang,Xiaoqing Jiang,Minghua Wang

DOI: https://doi.org/10.1364/oe.14.008630

IF: 3.8

2006-01-01

Optics Express

Abstract:Configuration of a novel compact dispersive and focusing device based on a Curved Waveguide Grating (CWG) is presented, which is essentially an integrated optic wavelength demultiplexer consisting of a curved stripe waveguide with tilted grating, a slab waveguide adjacent to it, and a set of output waveguides locate on focal line of the curved waveguide. Underlying wavelength demultiplexing mechanism of CWG is theoretically illustrated by employing the Fourier optics approach. Analysis shows that device based on CWG possesses fine wavelength resolution, compact configuration, and potentially low cost as well, which make it a promising wavelength demultiplexer, or a network performance monitor, in DWDM optical networks.
An Ultra-Compact MMI-based Wavelength Diplexer Employing Subwavelength Grating

Lu Liu,Qingzhong Deng,Zhiping Zhou

DOI: https://doi.org/10.1109/group4.2017.8320227

2017-01-01

Abstract:Through the refractive index engineering of the subwavelength grating, an ultra-compact multimode interference based diplexer is proposed and demonstrated. It is 43.4 μm in length, only ~30% of its conventional counterpart and displays a wide 1dB bandwidth >120nm.
Novel Wavelength Multiplexer Using (<italic>N</italic> + 1) × (<italic>N</italic> + 1) Arrayed Waveguide Grating and Polarization-Combiner-Rotator on SOI Platform

Jun Zou,Xiao Ma,Xiang Xia,Changhui Wang,Ming Zhang,Jinhua Hu,Xuyang Wang,Jian-Jun He

DOI: https://doi.org/10.1109/JLT.2021.3053837

IF: 4.7

2021-01-01

Journal of Lightwave Technology

Abstract:We propose an ultra-compact novel wavelength multiplexer employing a (N + 1) × (N + 1) arrayed waveguide grating (AWG) and a polarization-combiner-rotator (PCR) on the SOI platform, to realize a multiplexing for 2N wavelengths with a spacing of Δλ. The (N + 1) × (N + 1) AWG works at a bidirectional way to provide two groups of N × 1 wavelength multiplexing with each group having a channel spacing of 2×Δλ, and the central wavelengths of all input channels in one group have a wavelength shift of Δλ with respect to those in the other group. The double channel spacing results in a significant decrease on the footprint of the (N + 1) × (N + 1) AWG-based multiplexer compared with a conventional 2N × 1 AWG multiplexer with the same wavelength spacing Δλ. Due to the fact that a single mode fiber is insensitive to the polarization of input light, if we consider short reach datacom applications such as 100/400 GbE, the two separate multiplexing outputs of the (N + 1) × (N + 1) AWG can be combined as one output with one half wavelengths working at TE polarization and the other at TM polarization by employing a low loss and broadband PCR. In the experiment, we demonstrate a 16 × 200 GHz multiplexer based on a 9 × 9 AWG. The experimental results show that the on-chip loss of the fabricated multiplexer is 2.7 dB and the loss uniformity is 0.5 dB. The 1-dB and 3-dB bandwidths are >0.56 nm (i.e., 35% of the wavelength spacing) and >1.1 nm (i.e., 69% of the wavelength spacing), respectively. They can also be further increased by decreasing the gap between adjacent input waveguides at the interfaces of star couplers of the designed AWG without inducing an excess loss. The proposed multiplexer has great potential for application to future super large capacity (> Tb/s) data transmission systems.
Dual-layer SiNx-on-SOI Grating Coupler As an Efficient Higher-Order Fiber Mode Multiplexer

Lirong Cheng,Simei Mao,Yixiang Hu,H. Y. Fu

DOI: https://doi.org/10.1364/cleo_at.2021.jw1a.178

2021-01-01

Abstract:We demonstrate a dual-layer grating coupler as an efficient higher-order fiber mode multiplexer. Four channels from a fiber array can be multiplexed into four distinct TE-polarized modes in a few-mode fiber using the proposed multiplexer.
Silicon Mode (de)multiplexer Based on Cascaded Particle-Swarm-Optimized Counter-Tapered Couplers

Weiwei Chen,Hongxiang Li,Bohao Zhang,Pengjun Wang,Shixun Dai,Yuxiao Liu,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1109/jphot.2020.3046361

IF: 2.4

2020-01-01

IEEE Photonics Journal

Abstract:In this paper, a design of a silicon mode (de)multiplexer based on cascaded counter-tapered couplers is proposed and investigated. By using the particle swarm optimization algorithm and finite difference time domain method, structural parameters of each counter-tapered coupler in our proposed mode (de)multiplexer are optimized so that high conversion efficiencies can be obtained and coupling lengths can be significantly shortened. The coupling lengths of counter-tapered couplers in the proposed silicon four-mode (de)multiplexer operating in transverse-electric polarization are 8 μm, 9 μm, and 10 μm. The corresponding conversion efficiencies are respectively 98.98%, 99.98%, and 98.68%. Experimental results show that, the fabricated device exhibits a demultiplexed crosstalk of -32.76 dB, -27.10 dB, -32.45 dB, or -33.29 dB at 1550 nm wavelength, when the fundamental transverse-electric mode is respectively launched into the ports Input0, Input1, Input2, or Input3. The measured demultiplexed crosstalk is less than -15.15 dB from 1525 to 1596 nm and lower than -18.12 dB from 1525 to 1561 nm.
Silicon-on-Insulator-Based Compact Optical Demultiplexer Employing Etched Diffraction Grating

WH Wang,YZ Tang,YX Wang,HC Qu,YM Wu,T Li,JY Yang,YL Wang,M Liu

DOI: https://doi.org/10.1088/0256-307x/21/7/022

2004-01-01

Abstract:A compact optical demultiplexer with etched diffraction grating (EDG) is designed and fabricated on a silicon-on-insulator (SOI) material. Several 90degrees turning mirrors are used to bend the waveguides, and the size of the EDG-based demultiplexer is minimized to only 16 x 1.7 mm(2). The crosstalk is about -18 dB. The on-chip loss is about 18.2 dB, which is composed of about 16.9 dB excess loss and 1.3 dB diffraction loss. Measures to improve the performance are discussed.
Etched-Diffraction-Grating-Based Planar Waveguide Demultiplexer on Silicon-on-Insulator

Wenhui Wang,Yanzhe Tang,Yunxiang Wang,Hongchang Qu,Yaming Wu,Tie Li,Jianyi Yang,Yuelin Wang,Ming Liu

DOI: https://doi.org/10.1023/B:OQEL.0000025795.18597.c8

IF: 3

2004-01-01

Optical and Quantum Electronics

Abstract:An optical wavelength demultiplexer with the etched diffraction grating (EDG) on the silicon-on-insulator (SOI) material is demonstrated. Fabricated by the wet-anisotropic-etching method, 90° turning mirrors are used to bend waveguides, and the size of the EDG-based demultiplexer is minimized to only 16×2.5 mm 2 . The crosstalk is below −16 dB. The on-chip loss is about 9.97 dB, which is composed of about 8.72 dB excess loss and 1.25 dB diffraction loss. The polarization-dependent central wavelength shift is below 0.13 nm, and the polarization-dependent loss is about 0.35 dB. The sources of the crosstalk and loss are discussed in details, and the related measures to improve the performance are also presented.
High-Efficiency Unidirectional Dual-Wavelength-Band Grating Coupler with 1D Subwavelength Structure

Haoyang Tan,Baobao Chen,Yi Zhao,Shiming Gao,Xiaowei Guan

DOI: https://doi.org/10.1109/lpt.2023.3326185

IF: 2.6

2023-01-01

IEEE Photonics Technology Letters

Abstract:A unidirectional dual-wavelength-band grating coupler with one-dimensional (1D) subwavelength structures is proposed and experimentally demonstrated. Inverse optimization method is used for the design and the grating coupler fabricated on the silicon-on-insulator chip can achieve efficient fiber-chip coupling simultaneously in the O-band and the L-band. The peak coupling efficiencies in the two bands are measured to be 19.7% and 19.5% with 3-dB bandwidths of 27 and 38-nm, respectively.

Compact Five-mode De-multiplexer based on Grating Assisted Asymmetric Directional Couplers

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

A Nonreciprocal Add-Drop Multiplexer Based on Grating Assisted Couplers

Design and Numerical Optimization of A Mode Multiplexer Based on Few-Mode Fiber Couplers

Silicon Mode Multi/Demultiplexer Based on Multimode Grating-Assisted Couplers

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Compact Hybrid Five-Mode Multiplexer Based on Asymmetric Directional Couplers with Constant Bus Waveguide Width

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Ultrabroadband and Fabrication-Tolerant Mode (de)multiplexer Using Subwavelength Structure

An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

Compact and broadband mode multiplexer and demultiplexer based on asymmetric plasmonic-dielectric coupling.

Compact Dense Wavelength-Division (de)multiplexer Utilizing a Bidirectional Arrayed-Waveguide Grating Integrated with a Mach–Zehnder Interferometer

Fiber-Chip Bi-Wavelength Multiplexing with Subwavelength Single-Etch Grating Coupler and Diplexer

Novel Dispersive and Focusing Device Configuration Based on Curved Waveguide Grating (CWG).

An Ultra-Compact MMI-based Wavelength Diplexer Employing Subwavelength Grating

Novel Wavelength Multiplexer Using (<italic>N</italic> + 1) × (<italic>N</italic> + 1) Arrayed Waveguide Grating and Polarization-Combiner-Rotator on SOI Platform

Dual-layer SiNx-on-SOI Grating Coupler As an Efficient Higher-Order Fiber Mode Multiplexer

Silicon Mode (de)multiplexer Based on Cascaded Particle-Swarm-Optimized Counter-Tapered Couplers

Silicon-on-Insulator-Based Compact Optical Demultiplexer Employing Etched Diffraction Grating

Etched-Diffraction-Grating-Based Planar Waveguide Demultiplexer on Silicon-on-Insulator

High-Efficiency Unidirectional Dual-Wavelength-Band Grating Coupler with 1D Subwavelength Structure