Influence of Zeolite Addition on Mechanical Performance and Shrinkage of High Strength Engineered Cementitious Composites

Zheng Xuan,Zhang Jun
DOI: https://doi.org/10.1016/j.jobe.2020.102124
IF: 7.144
2021-01-01
Journal of Building Engineering
Abstract:In this study, calcined zeolite particles were used as internal curing agent to replace cement and quartz sand simultaneously in Ordinary Portland Cement(OPC) based Engineered Cementitious Composites(ECC) material. The influence of the zeolite-cement replacement on the mechanical performance and the shrinkage of the materials were experimentally investigated. ECC specimens with water-binder ratio of 0.2 and zeolite content of 192 kg/m(3) were prepared, and the zeolite-cement replacements were controlled as 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% and 100%. Compression test, uniaxial tension, shrinkage and relative humidity test were conducted on the specimens. The test results show that, with the increase of the zeolite-cement replacement, the strength of the material first increases and then decreases, and the crack width control ability during tension process is improved. The autogenous shrinkage control ability and the relative humidity of the material are also improved, while the zeolite-cement replacement has little influence on the drying shrinkage and the relative humidity drop caused by environmental drying.
What problem does this paper attempt to address?