Effects of Percentages and Effective Cementitious Coefficient of Zeolite and Silica Fume on the Compressive Strength and Water Absorption of Concrete

DOI: https://doi.org/10.1007/s40996-023-01088-9

2023-04-04

Abstract:Nowadays, the use of concrete as the primary material for construction projects has increased dramatically. Pozzolans as cementitious materials are used to improve the quality and properties of concrete. Pozzolanic material as an alternative to cement reduces the consumption of cement and emission of CO 2 and moves towards sustainable development. The mechanical properties of concrete, including compressive strength and durability, were increased by pozzolans, and its permeability was reduced. Experimental and economic study of the effect of the substitution and effective cementitious coefficient of zeolite and silica fume on the compressive strength and other properties of concrete was explored in this work. Three mix designs were considered, including zeolite with 15, 20, and 25% of cement weight replacement and effective coefficients of 0.6, 0.8, 1, and 1.2, and with silica fume at 3, 5, and 7% of cement weight with effective coefficients of 2, 3, and 4, respectively. Test results of these mix designs were compared with those of references with different compressive strengths of 25, 30, and 35 MPa. Test results indicated that coefficients equal to 0.79 and 2.9 for zeolite and silica fume were the most effective cementitious coefficients for cement substitutes. The optimal percentage of zeolite and silica fume replacement was 20 and 7%, respectively. The average water absorption rate for concretes containing zeolite was 14% while that for concretes containing silica fume was 3% less than reference concretes. The specific gravity of concretes containing zeolite and higher compressive strength was increased, but the same parameters for concretes containing silica fume and higher compressive strength were decreased.

engineering, civil