Abstract:This paper presents a design study focusing on the thermal safety of an induction motor integrated with a pump unit, which operates submerged in liquefied natural gas (LNG) in the LNG tanks of LNG carrier ships ranging from 150 K to 200 K cubic meters (CBM). In this study, we carried out the electromagnetic design of the induction motor and verified the thermal safety against a temperature increase due to losses during the motor operation through thermal fluid analysis, taking into account the discharge flow of the emergency pump and the air gap of the motor. In the electromagnetic design, the resistivity of the stator winding copper conductors and the rotor aluminum bars, which act as important design constants for the rated operating and starting characteristics of the induction motor in cryogenic temperature environments, reflects the characteristic of linearly changing with the temperature. In cryogenic environments, the reduction in the resistance of the rotor bars of the induction motor leads to a decrease in the starting torque characteristics. Therefore, the shape optimization design of the rotor bar was performed to improve the starting torque characteristics, and 2D electromagnetic analysis was performed on the magnetic flux density distribution and magnetic saturation using Ansys Electromagnetics 16.0. After the electromagnetic design, a 3D thermal flow analysis was conducted using Ansys Fluent 17.0, considering the stator iron losses, rotor bar losses, stator and rotor iron losses, and stray load losses as heat sources. The flow analysis aimed to analytically verify the thermal safety concerning the vaporization of the LNG flowing through the emergency pump's discharge flow path and the motor's internal air gap. The motor was manufactured, and the rated and starting operating characteristics of the motor were measured under LN2 submerged conditions according to the IEEE 112 F1 method, to validate whether the performance characteristics met the specifications' requirements. Subsequently, the thermal safety of the motor was finally verified through a temperature increase test under LNG submerged conditions after assembling it with the emergency pump.

A Semi-Static Methodology for Predicting Rotating Performance of a 15kW Cryogenic Induction motor for Submerged Liquefied Natural Gas Pumps

Coupled Electromagnetic and Thermal Analysis of a 15kw Cryogenic Induction Motor for Submerged Liquefied Natural Gas Pumps

Design of 200 kW Cryogenic Induction Motor for Liquefied Natural Gas Emergency Pump

Design and Performance Analysis of High-Speed Cryogenic Permanent Magnet Synchronous Motor

Main Losses Study of Cryogenic Induction Motor for Submerged Liquid Natural Gas Pump

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Study on Magnetic Properties of Ferromagnetic Materials in Cryogenic Conditions

Research on loss differences and thermal optimisation of submerged cryogenic high‐speed permanent magnet motors

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Determination of Iron Loss Coefficients of Ferromagnetic Materials Used in Cryogenic Motors

Research on the Material Characteristics and Loss Calculation Method of Cryogenic Permanent Magnet Motor Stator for LNG Pump

Influence of cavitation on inducer and return channels of LNG pump

Research on Electromagnetic Performance and Rotor Eddy Current Loss Suppression of Ultra‐Low Temperature and High‐Speed Permanent Magnet Motor Materials for LNG Pumps

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Design and Friction Loss Study of Full-Ocean Depth Oil-Filled Direct Current Motor

Towards Predictive Maintenance of a Heavy-Duty Gas Turbine A New Hybrid Intelligent Methodology for Performance Simulation

Thermal Optimization of a Totally Enclosed Forced Ventilated Permanentmagnet Traction Motor Using Lumped Parameter and Partial Computational Fluid Dynamics Modeling

A Hybrid Methodology for Analyzing the Performance of Induction Motors with Efficiency Improvement by Specific Commercial Measures

Numerical Simulation and Analysis on Hydraulic Performance in Vertical Canned Motor Pump

Rotor Design and Analysis of a High Speed Permanent Magnet Synchronous Motor for Cryogenic Centrifugal Pump

Key technologies and research schemes for submerged pumps for liquefied natural gas