Abstract:This paper presents a design study focusing on the thermal safety of an induction motor integrated with a pump unit, which operates submerged in liquefied natural gas (LNG) in the LNG tanks of LNG carrier ships ranging from 150 K to 200 K cubic meters (CBM). In this study, we carried out the electromagnetic design of the induction motor and verified the thermal safety against a temperature increase due to losses during the motor operation through thermal fluid analysis, taking into account the discharge flow of the emergency pump and the air gap of the motor. In the electromagnetic design, the resistivity of the stator winding copper conductors and the rotor aluminum bars, which act as important design constants for the rated operating and starting characteristics of the induction motor in cryogenic temperature environments, reflects the characteristic of linearly changing with the temperature. In cryogenic environments, the reduction in the resistance of the rotor bars of the induction motor leads to a decrease in the starting torque characteristics. Therefore, the shape optimization design of the rotor bar was performed to improve the starting torque characteristics, and 2D electromagnetic analysis was performed on the magnetic flux density distribution and magnetic saturation using Ansys Electromagnetics 16.0. After the electromagnetic design, a 3D thermal flow analysis was conducted using Ansys Fluent 17.0, considering the stator iron losses, rotor bar losses, stator and rotor iron losses, and stray load losses as heat sources. The flow analysis aimed to analytically verify the thermal safety concerning the vaporization of the LNG flowing through the emergency pump's discharge flow path and the motor's internal air gap. The motor was manufactured, and the rated and starting operating characteristics of the motor were measured under LN2 submerged conditions according to the IEEE 112 F1 method, to validate whether the performance characteristics met the specifications' requirements. Subsequently, the thermal safety of the motor was finally verified through a temperature increase test under LNG submerged conditions after assembling it with the emergency pump.

Study on Magnetic Properties of Ferromagnetic Materials in Cryogenic Conditions

Determination of Iron Loss Coefficients of Ferromagnetic Materials Used in Cryogenic Motors

Research on the Material Characteristics and Loss Calculation Method of Cryogenic Permanent Magnet Motor Stator for LNG Pump

Study on Iron Loss in Two Kinds of Moving-magnet Linear Motors

Main Losses Study of Cryogenic Induction Motor for Submerged Liquid Natural Gas Pump

Research on loss differences and thermal optimisation of submerged cryogenic high‐speed permanent magnet motors

Design and Performance Analysis of High-Speed Cryogenic Permanent Magnet Synchronous Motor

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

Coupled Electromagnetic and Thermal Analysis of a 15kw Cryogenic Induction Motor for Submerged Liquefied Natural Gas Pumps

Research on Electromagnetic Performance and Rotor Eddy Current Loss Suppression of Ultra‐Low Temperature and High‐Speed Permanent Magnet Motor Materials for LNG Pumps

Design of 200 kW Cryogenic Induction Motor for Liquefied Natural Gas Emergency Pump

A Semi-Static Methodology for Predicting Rotating Performance of a 15kW Cryogenic Induction motor for Submerged Liquefied Natural Gas Pumps

Cryogenic Temperature Performance of Traveling Wave Ultrasonic Motor

Thermal characteristics study of a water-cooled permanent magnet linear motor

Improvement of Magnetic and Cryogenic Energy Preservation Performances in a Feeding-Power-free Superconducting Magnet System for Maglevs

Estimation of the Iron Loss in Deep-Sea Permanent Magnet Motors Considering Seawater Compressive Stress

Research on Cryogenic Cooling System of Electric Rocket Pump Driving System

Optimisation and Loss Analyses of Pulsed Field Magnetisation in a Superconducting Motor with Cryocooled Iron Cores

Study on the Performance of a High-Speed Motor, Considering the Effect of Temperature on the Properties of High-Strength Non-Oriented Silicon Steel

Research on the Magnetic Properties of High-Saturation Magnetically Induced Alloy Motors under Magnetocaloric Coupling