Abstract:The pill-box window is one of the important components of microwave vacuum electronic devices (VEDs), and research into it is of great significance. As the operating frequency increases, the problems associated with the reduction in the structure size include the reduction of the brazing plane and the reduction in the tolerance of the pill-box window. These problems will cause traditional pill-box windows to be unsuitable in high-frequency bands, especially in terahertz and sub-terahertz regions. The most influential factor is the length of the circular waveguide in the box window. The welding plane of the over-size pill-box window is the annular bottom surface on both sides of the dielectric sheet, which is larger than the circular waveguide, and the operating frequency does not directly affect the area of the brazing surface. Choosing a suitable diameter for the dielectric sheet can effectively increase the tolerance to the length of the pill-box window circular waveguide. Therefore, an over-size pill-box window would be a practicable approach to improve the performance compared to the traditional pillow-box in high-frequency bands. This paper describes, in detail, the theoretical design, simulation optimization and experimental process of this improved pill-box window. An over-size pill-box window suitable for G band VEDs was successfully developed. The experimental result in the 215–225 GHz band is that the maximum transmission loss is −1 dB, and the overall transmission loss is close to −0.5 dB. The overall reflection is less than −11 dB.

A Semi-Analytic Numerical Algorithm of Diamond Pillbox Windows for Terahertz Vacuum Electron Device Applications

A Broadband Sapphire Disc Pillbox Window for Terahertz Traveling-Wave Tubes

Scattering Matrix Analysis of a High-Power Pill-Box-type Window Without Ghost Mode

Investigation on Symmetric and Asymmetric Broadband Low-Loss W-Band Pillbox Windows

Over-Size Pill-Box Window for Sub-Terahertz Vacuum Electronic Devices

Low-diffraction EMI-shielding Multiband Optical Window Based on Randomized Metallic Mesh

Experimental Study of an Overmoded V-Band Sapphire Pillbox Window

Investigation and Batch Fabrication of G-Band Broad Band and Low Loss Monocrystalline Diamond Window for Vacuum Electron Devices

A Broadband Low-Lessw-band Pill-box Window

Investigation and Fabrication of a Low Loss and Wideband Single Crystal Diamond Vacuum Window for W-Band Traveling Wave Tube

Performing Intelligent Design of Broadband Pillbox Window for a Terahertz Traveling-Wave Tube by Using Physics-Informed Neural Network and Genetic Algorithm

Wideband Output Brewster Window for Terahertz TWT Amplifiers Application

A New Type Ka Band Pillbox

Novel millimeter wave power-combining system in 3-D packaging level

Design and Analysis of A Waveguide Window for W-Band Twt

Design of High Power Microwave Ceramic Windows in C-Band

Investigation on Dielectric Window Treelike Breakdown and Suppression under HPM in Vacuum

Development of RF windows for 650 MHz multibeam klystron

Finite Difference Time Domain Analysis of Two-Dimensional Surface Acoustic Wave Piezoelectric Phononic Crystals at Radio Frequency

Investigation of Brewster Window for Broadband Terahertz Backward Wave Oscillator

Design Of 0.27-0.37thz Wideband Coaxial Line To Double-Ridge Waveguide Window For Traveling-Wave Tube Amplifier