Abstract:Tribology at cryogenic temperatures has attracted much attention since the 1950s with the acceleration of its applications in high-tech equipment such as cryogenic wind tunnels, liquid fuel rockets, space infrared telescopes, superconducting devices, and planetary exploration, which require solid lubrication for moving parts at low temperatures down to 4 K in cryogenic liquid, gaseous, or vacuum environments. Herein, the research progress regarding cryo-tribology is reviewed. The tribological properties and mechanisms of solid lubricants listed as carbon materials, molybdenum disulfide, polymers, and polymer-based composites with decreasing temperature are summarized. The friction coefficient increases with decreasing temperature induced by thermally activated processes. The mechanism of transfer film formation should be considered as a significant way to enhance the tribological properties of solid lubricants. In addition, applications of solid lubrication on moving parts under cryogenic conditions, such as spherical plain bearings and roller bearings, are introduced. The technology for tribological testing of materials and bearings at cryogenic temperatures is summarized, where the environmental control, motion and loading realization, as well as friction and wear measurement together in a low-temperature environment, result in the difficulties and challenges of the low-temperature tribotester. In particular, novel technologies and tribotesters have been developed for tribotests and tribological studies of solid lubricants, spherical plain bearings, and roller bearings, overcoming limitations regarding cooling in vacuum and resolution of friction measurement, among others, and concentrating on in-situ observation of friction interface. These not only promote a deep understanding of friction and wear mechanism at low temperatures, but also provide insights into the performance of moving parts or components in cryogenic applications.

Improvement of Mechanical and Tribological Performances of Carbon Nanostructure Films by Cryogenic Treatment

Fullerene-like Nanostructure Induced Excellent Friction Behavior in High Vacuum Environment for Hydrogenated Carbon Film

Tribological performances of a-C films tested on dry nitrogen environment with various Hertz pressures: Failure mechanisms and in-situ formation graphene

Achieving synergistic improvement of wear and mechanical properties in Ti–6Al–4V alloy by multiple cryogenic treatment

Structural and environmental dependence of superlubricious properties in hydrogenated Graphite-Like carbon Films: Implications in solid state lubrication

Annealing Effect On The Microstructure Modification And Tribological Properties Of Amorphous Carbon Nitride Films

Enhancing tribological performance of graphene sheet-embedded carbon films on steel substrates via texture engineering and chromium doping

Studies on newly developed hBN/graphene-based nano-fluids supported by cryogenic cooling conditions in improving the tribological performance of Ti6Al4V alloy

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Effect of multiple deep cryo-treating and tempering on microstructure and property evolution of high carbon bearing steel

Toward tribological performance of amorphous carbon film applied in methane atmosphere by thermal annealing

Study on Tribological Behavior and Mechanism of Fullerene-like Hydrogenated Carbon(FL-C) Film Sliding Against Different Counterparts

Progresses on Cryo-Tribology: Lubrication Mechanisms, Detection Methods and Applications

Experimental study on friction and wear behaviour of amorphous carbon coatings for mechanical seals in cryogenic environment

A Study on Mechanism of Tribological Behavior of Carbon Nanotubes

Enhancing tribological properties of carbon-based films through catalytic Ni 3 C

Superlow friction and wear enabled by nanodiamond and hexagonal boron nitride on a-C:H films surfaces in dry nitrogen

Tribological Performance Enhancement Of Amorphous Hard Carbon-Films On Aisi-52100 Bearing Steel

A New Pathway for Superlubricity in a Multilayered MoS2-Ag Film under Cryogenic Environment

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Atomic-Scale Understanding on the Tribological Behavior of Amorphous Carbon Films under Different Contact Pressures and Surface Textured Shapes