Abstract:The textured design of amorphous carbon (a-C) film can significantly improve the tribological performance and service life of moving mechanical components. However, its friction dependence on different texture shapes, especially under different load conditions, remains unclear. In particular, due to the lack of information regarding the friction interface, the underlying friction mechanism has still not been unveiled. Therefore, the effects of contact pressure and textured shapes on the tribological behavior of a-C films under dry friction conditions were comparatively studied in this work by reactive molecular dynamics simulation. The results show that under low contact pressure, the tribological property of a-C film is sensitive to the textured shape, and the system with a circular textured surface exhibits a lower friction coefficient than that with a rectangular textured surface, which is attributed to the small fraction of unsaturated bonds. However, the increase of contact pressure results in the serious reconstruction and passivation of the friction interface. On the one hand, this induces a growth rate of friction force that is much smaller than that of the normal load, which is followed by a significant decrease in the friction coefficient with contact pressure. On the other hand, the destruction or even disappearance of the textured structure occurs, weakening the difference in the friction coefficient caused by different textured shapes of the a-C surface. These results reveal the friction mechanism of textured a-C film and provide a new way to functionalize the a-C as a protective film for applications in hard disks, MEMS, and NEMS.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to understand the tribological behavior of amorphous carbon (a - C) films under different contact pressures and surface texture shapes. Specifically, the researchers hope to explore the influence of contact pressure and surface texture shape on the frictional properties of a - C films through reactive molecular dynamics simulations, especially their performance under dry - friction conditions. The research aims to reveal how surface texture design affects the friction coefficient of a - C films and explore the underlying friction mechanisms, thereby providing theoretical guidance for improving the tribological performance and service life of mechanical components. ### Main research questions: 1. **How does the frictional performance of a - C films change under different contact pressures?** - The researchers observed the changing trend of the friction coefficient by simulating the friction processes under different contact pressures (5 GPa, 20 GPa, 50 GPa). 2. **What is the influence of different surface texture shapes (circular and rectangular) on the frictional performance of a - C films?** - The researchers compared the frictional performance of circular and rectangular texture shapes under different contact pressures and explored the influence of texture shape on the friction coefficient. 3. **How does the interface structure of a - C films change during the friction process?** - By analyzing the evolution of the interface structure during the sliding process, the researchers attempted to reveal the interface reconstruction mechanisms under different contact pressures and texture shapes. ### Research methods: - **Reactive molecular dynamics simulation (RMD)**: Use the LAMMPS software for simulation and construct a - C film models with different texture shapes. - **Model setup**: The upper layer is a texture - free a - C film, and the lower layer is an a - C film with circular or rectangular textures. - **Simulation parameters**: The contact pressures are 5 GPa, 20 GPa, and 50 GPa respectively, the sliding speed is 100 m/s, and the sliding time is 750 ps. ### Key findings: 1. **At low contact pressure, the frictional performance is sensitive to the texture shape**: - Under a contact pressure of 5 GPa, the a - C film with circular texture exhibits a lower friction coefficient, which is attributed to fewer unsaturated bonds. 2. **At high contact pressure, the influence of texture shape weakens**: - When the contact pressure increases to 20 GPa and 50 GPa, the severe reconstruction of the friction interface leads to the destruction or disappearance of the texture structure, reducing the difference in the friction coefficient between different texture shapes. 3. **The friction coefficient decreases as the contact pressure increases**: - At high contact pressure, the growth rate of frictional force is much smaller than that of the normal load, resulting in a significant decrease in the friction coefficient. ### Conclusion: This research, through reactive molecular dynamics simulations, has explored in detail the influence of different contact pressures and surface texture shapes on the frictional performance of a - C films and revealed the microscopic mechanisms of the friction interface. These results provide a theoretical basis for designing high - performance a - C films, and are of particular significance in applications such as hard disks, MEMS, and NEMS.

Atomic-Scale Understanding on the Tribological Behavior of Amorphous Carbon Films under Different Contact Pressures and Surface Textured Shapes

Friction dependence on the textured structure of an amorphous carbon surface: A reactive molecular dynamics study

Insights into friction behavior of textured amorphous carbon and lubricant composite system: Dependence on the lubricant viscosity and textured shape

Exploring the role of surface hydrogenation in anti-friction of circular-textured amorphous carbon film from the atomic level and its dependence on textured shape

Unraveling the friction response from selective hydrogenation of textured amorphous carbon surface

Atomistic Insights into Interfacial Optimization Mechanism for Achieving Ultralow-Friction Amorphous Carbon Films under Solid-Liquid Composite Conditions

Comparative Study of the Tribology of Amorphous Carbon Films Via Magnetron Sputtering Depending on the Different Magnetic Field

Contact size effects on the friction and wear of amorphous carbon films

Tribological performances of a-C films tested on dry nitrogen environment with various Hertz pressures: Failure mechanisms and in-situ formation graphene

Friction reactions induced by selective hydrogenation of textured surface under lubricant conditions

Extreme Contact Pressure-Induced In-Situ Structural Evolution of Nanoclusters Governing Macroscopic Superlubricity in A-C:H Films

Tribofilm Formation and Friction Reduction Performance on Laser-Textured Surface with Micro-Grooved Structures

Theoretical superlubricity and its friction stability of amorphous carbon film induced by simple surface graphitization

Regulating Vacuum Tribological Behavior of A-C:H Film by Interfacial Activity.

Ultra-low Friction of A-C:H Films Enabled by Lubrication of Nanodiamond and Graphene in Ambient Air

Combined Effects of Structural Transformation and Hydrogen Passivation on the Frictional Behaviors of Hydrogenated Amorphous Carbon Films

Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C:H and a-C:H:Si films

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Tribological mechanism of micro/meso/macroscopic textured surfaces under different normal forces, relative velocities, and sliding directions

Metastable hybridized structure transformation in amorphous carbon films during friction—A study combining experiments and MD simulation

Enhancing tribological performance of graphene sheet-embedded carbon films on steel substrates via texture engineering and chromium doping