Abstract:This paper presents an improved damped alternating current (DAC) testing methodology, which is composed of a cost efficient DAC generator and a pulse‐based distributed PD detection technique for on‐site partial discharge testing of long length HV cables. This research introduces a novel damped alternating current (DAC) testing methodology, which integrates an enhanced DAC generator with a pulse‐based distributed partial discharge (PD) detection technique. The advanced DAC generator is designed without the need for high voltage (HV) solid‐state switches, thereby offering a cost‐effective solution for field‐testing voltage generation through a direct current–alternating current conversion approach. To meet the demand for high instantaneous power, a capacitor bank is employed as the power supply. Furthermore, the implementation of a distributed PD detection technique enhances sensitivity and eliminates limitations associated with cable length. To minimize the construction costs of the distributed PD‐detection system, a pulse synchronization technique has been employed. Efforts to reduce the system's weight were informed by simulations, resulting in the design and development of a prototype weighing 850 kg for a 64/110 kV power cable. The reduction in the number of HV solid‐state switches contributes to significant cost savings, amounting to tens of thousands of dollars, when compared to conventional DAC generators. Laboratory and field tests validated the effectiveness of the cost‐efficient DAC testing methodology.

Implementation of a Novel Very Low Frequency Cosine-Rectangular Voltage Generator for Insulation Testing of Power Cables

Development of a Novel 20 Kv 0.1 Hz Very Low Frequency Cosine-Rectangular Voltage Generator for Multi-Functional Insulation Testing of MV Power Cables

Additional Low Frequency Signal Measurement Method Of Insulation Resistance About Mine Cable

Very Low Frequency (VLF) Exponential Wave Generator for Status Detection of Power Cables

A Method for Constructing Short-Time AC Voltage Generator to Evaluate Cable Conditions

A Novel DAC Generator for PD Testing of MV Cable Insulation

An Efficient Methodology of Simultaneous Three-Phase Withstand Voltage and Sensitive Partial Discharge Testing of Medium Voltage Power Cables

A Cable Insulation Condition Detection Method Based on H-Bridge Cascading and Resonance

On-site Insulation Tests for MV Cable Using Very Low Frequency and Damped AC Techniques

A Three-Phase Programmable Voltage Sag Generator for Low Voltage Ride-Through Capability Test of Wind Turbines

A High Voltage Multi Level Arbitrary Waveform Generator for Insulation Testing

The Application Research of Very Low Frequency Diagnostic Methods in Acceptance Tests on New Cable Systems of Medium Voltage

HVDC Topology Structure Using Existing Ac Cable Lines for Integrating Renewable Energy Sources

An Integrated Testbed with Single DC Source for Delivering Symmetrical Square-Wave Excitation Voltage in the Triple Pulse Test.

Development of Two-in-one Test Device for Oscillating Wave and 0.1hz Cosine Square Wave

A Novel Circuit Topology for the VSC-HVDC Submodules Testing

The implementation of a cost‐efficient damped AC testing methodology for transmission cables based on DC–AC conversion and distributed partial discharge detection

A Low-cost DAC System for On-site PD Testing of HV Cables Based on ACRF and Capacitor Bank

Algorithm for Fast Calculating the Energization Overvoltages along a Power Cable Based on Modal Theory and Numerical Inverse Laplace Transform

An Improved Design of Damped AC Test System for Partial Discharge Measurement in Distribution Power Cables

A Novel Oscillation Wave Test System for Partial Discharge Detection in XLPE Cable Lines