Abstract:To make the voltage source converter based high voltage direct current (VSC-HVDC) system extend to long distance bulk power overhead line transmission is the inherent requirement of energy source distribution in China and future trend of power grid development. However, the challenges associated with the state-of-the-art VSC-HVDC system mainly include: a) difficulty to handle dc fault, b) less transmission capacity compared with the traditional HVDC systems, and c) difficulty to select grounding point. For the first challenge, this paper analyzes vulnerability of the existing topologies against dc faults, focusing on an overview of the topologies with dc fault ride-through capability. According to the characteristics of dc fault processing, these topologies can be divided into three basic types. Furthermore, advantages and defects of these typical topologies are discussed. For the second and third challenges, to achieve a high voltage and power level, a bipolar VSC-HVDC topology with assembly converter is proposed. In this topology, each pole consists of several basic converter units (BCU) in series or in parallel; between the positive pole and the negative pole is the neutral bus which is connected to the ground electrode. Furthermore, the advantages and shortcomings of the possible grounding modes are summarized. At last, according to the unidirectional energy flow characteristics of China, two basic VSC-HVDC structures are analyzed.

HVDC Topology Structure Using Existing Ac Cable Lines for Integrating Renewable Energy Sources

An Extended Bipole HVDC Structure With Three Wires for Conversion of AC Lines to HVDC

Study on Hybrid HVDC Transmission Technology Used for Upgrading of Conventional HVDC Transmission System

Cascaded H7 Current Source Converter Based Power Transmission System And Fault Analysis

The Development of HVDC Transmission System

A Hybrid HVDC Topology Suitable for Large-Scale Pure Clean Energy Power Base Transmission

Modulation and Control of a New Alternate Arm Multilevel Converter for High-Voltage Direct Current System with Direct Current Fault Ride-Through Capability

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

A MMC Topology with AC Short-Circuit Fault Ride-Through Capability and its Control Strategies

Hybrid High-Voltage Direct Current Topology with Line Commutated Converter and Modular Multilevel Converter in Series Connection Suitable for Bulk Power Overhead Line Transmission

Energy Diverting Converter Topology Using Unidirectional Current H-Bridge Submodules for VSC-HVDC Transmission System

Control Strategy Research Of Vsc Based Multiterminal Hvdc System

VSC-HVDC Technology Suitable for Bulk Power Overhead Line Transmission

A LCC and MMC Series Hybrid HVDC Topology Suitable for Bulk Power Overhead Line Transmission

Modeling and Simulation for a Hybrid Current Source Converter High Voltage Direct Current Transmission System

Parallel Converter-Based Hybrid HVDC System for Integration and Delivery of Large-Scale Renewable Energy

A Multilevel DC-Link Converter for VSC-HVDC Application

A Novel Topology for HVDC Link Connecting to Offshore Wind Farms

Converter Topologies for HVDC Grids

Modeling and Control of Extended Multiterminal High Voltage Direct Current Systems with Three-Wire Bipole Structure

Topology of Cross-connected Sub-modules for Long-distance Bulk Overhead Line Power Transmission