Abstract:The fabrication of compact, continuous, and large-scale metal organic framework (MOF) membranes with high permeability and H-2/CO2 selectivity remains challenging because of the wake interaction between the MOF membrane and the substrate. In addition, substrates with smooth and plain surfaces and suitable pore size are required to prepare high-quality MOF membranes because it is difficult to obtain dense and continuous MOF membranes on a substrate with large pores and rough surfaces. To overcome these challenges, numerous MOF membrane growth methods have emerged, including in situ (direct) growth, secondary (seeded) growth, and layer-by-layer growth methods as well as electrostatic spinning and the chemical modification of the substrate. Among these methods, usage of substrates suitable for surface-functionalization is a promising technique. Herein, Al2O3 was selected as the substrate and was coated with PIM-1 (one polymer of intrinsic microporosity), followed by carboxylation of PIM-1 to furnish a large number of carboxyl groups on the surface. In situ growth of the MOF membrane using the interactions between the carboxyl group and the metal yielded two types of compact, continuous, and large-scale polymer-supported MOF membranes (PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1). Furthermore, the fabricated polymer-supported MOF membrane structures were investigated by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). Gas separation experiments were performed to explore the gas permeability and selectivity of the prepared MOF membranes. The XRD characterization confirmed the pure phase and high crystallinity of the MOF membranes. The SEM images showed that the MOF membranes were compact and continuous with a tight combination between the MOF crystal membrane and the substrate. Gas separation measurements showed that both MOF membranes exhibited high H-2 permeability and selectivity for H-2/CO2. For the PIM-1-COOH/ZIF-8 and PIM-1-COOH/HKUST-1 membranes, the 1 : 1 binary mixtures gas separation factors of H-2/CO2 calculated as the gas molar ratios in the permeate and retentate side 7.32 and 9.69, respectively, at room temperature and atmospheric pressure. The H-2/CO2 mixture separation factors of the two MOF membranes exceeded the corresponding Knudsen constants (4.7), with H-2 permeances higher than 3.16 x 10(-6) and 1.14 x 10(-6) mol.m(-2).s(-1).Pa-1, respectively. The ideal separation factors of H-2/CO2 of both MOF membranes calculated as the ratio of single gas permeances were 7.70 and 12.04, respectively, with the respective H-2 permeances of up to 3.73 x 10(-6) and 3.86 x 10(-6) mol.m(-2).s(-1).Pa-1. Because of their outstanding characteristics, these novel MOF membranes can be widely used in the fields of H-2 purification and separation.

Post-synthetic modification of highly stable UiO-66-NH<sub>2</sub> membranes on porous ceramic tubes with enhanced H<sub>2</sub> separation

Salicylaldehyde-assisted ZrO2-induced conversion approach to prepare high performance hollow fiber-supported UiO-66-NH2 membrane for hydrogen separation

Salicylaldehyde-assisted ZrO 2 -induced conversion approach to prepare high performance hollow fiber-supported UiO-66-NH 2 membrane for hydrogen separation

In-situ growth of UiO-66-NH2 in porous polymeric substrates at room temperature for fabrication of mixed matrix membranes with fast molecular separation performance

Preparation of UiO-66 membrane through heterogeneous nucleation assisted growth strategy for efficient CO 2 capture under humid conditions

-SO3H Functionalized UiO-66 Nanocrystals in Polysulfone Based Mixed Matrix Membranes: Synthesis and Application for Efficient CO2 Capture

Ultrathin UiO-66-NH2 Polycrystalline Membrane for CO2/CH4 Separation

Mixed Matrix Membranes Containing UiO-66(Hf)-(OH)2 Metal–Organic Framework Nanoparticles for Efficient H2/CO2 Separation

Polyzwitterion-Grafted Uio-66-Pei Incorporating Polyimide Membrane For High Efficiency Co2/Ch4 Separation

Fabrication of Polymer-Supported Metal Organic Framework Membrane and Its Gas Separation Performance

Constructing Connected Paths between UiO‐66 and PIM‐1 to Improve Membrane CO2 Separation with Crystal‐Like Gas Selectivity

Remarkable enhancement of gas selectivity on organosilica hybrid membranes using urea-modulated metal-organic framework nanoparticles

Optimization of a MOF Blended with Modified Polyimide Membrane for High-Performance Gas Separation

Poly(ionic liquid)-Functionalized UiO-66-(OH)2: Improved Interfacial Compatibility and Separation Ability in Mixed Matrix Membranes for CO2 Separation

Modifying Polysulfone Dual-Layer Hollow Fiber Membrane with Amine-Functionalized Bimetallic MOF (Pei@hkust-1(Cu, Mg)) for Improved Mechanical Stability and CO2/CH4 Separation Performance

Preparation and characterization of small-size amorphous MOF mixed matrix membrane

Hydrogen-bonded hybrid membranes based on hydroxylated metal-organic frameworks and PIM-1 for ultrafast hydrogen separation

In situ electrochemical potential-induced synthesis of metal organic framework membrane on polymer support for H2/CO2 separation

Homoporous hybrid membranes containing metal-organic cages for gas separation

Enhancing the Gas Separation Selectivity of Mixed-Matrix Membranes Using a Dual-Interfacial Engineering Approach

Enhanced CO2/N2 Separation of Mixed-Matrix Membranes Containing Hierarchical UiO-66 Synthesized from Hard Templates