Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

Reforming of methanol to produce hydrogen over the Au/ZnO catalyst

Hydrogen Production Via Steam Reforming of Methanol on Cu/ZnO/Al2O3 Catalysts: Effects of Al2O3 Precursors

Production of Hydrogen Via Autothermal Reforming and Steam Reforming of Methanol on Au-NiO/TiO_2 Catalyst

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Au-NiO/TiO_2 Catalyst for Methanol Autothermal Reforming to Produce Hydrogen

Catalysis of Reforming Methanol Steam for Generation of Hydrogen over Au/La2O3/TiO2 Catalyst

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

ZnO-ZnFe2O4 Catalyst for Hydrogen Production from Methanol Steam Reforming

Pd/ZnO catalysts for direct CO2 hydrogenation to methanol

Selective Production of Hydrogen from Partial Oxidation of Methanol over Supported Silver Catalysts Prepared by Method of Redox Coprecipitation

A highly selective and stable ZnO-ZrO2 solid solution catalyst for CO2 hydrogenation to methanol

Methanol Steam Reforming for Hydrogen Production over CuZnZrOx: Promotion Effect of Cu

Anodic aluminum oxide supported Cu-Zn catalyst for oxidative steam reforming of methanol

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Dissecting ZnO X /Cu interfacial self-encapsulation and methanol-induced strong metal-support interaction of the highly active alloyed CuZn and ZnO for methanol steam reforming

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst for enhanced CO2 -methanol conversion at low temperature and pressure

Steam reforming of ethanol for hydrogen production over NiO/ZnO/ZrO2 catalysts

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Low-temperature hydrogen production from methanol steam reforming on Zn-modified Pt/MoC catalysts