Abstract:Structural Health Monitoring, Ahead of Print. Pumped storage power stations usually arrange galleries in the backfill area at the bottom of the reservoir basin. Under the influence of uneven deformation, the galleries may be difficult to adapt to deformation and generate cracking, which can affect dam safety. In this study, the upper reservoir of Hohhot pumped storage power station was taken as a case study. Through a combination of monitoring data and numerical simulation, the deformation characteristics of the galleries on the backfill foundation were analyzed, and the causes and mechanisms of galleries cracking and structural joints damage were revealed. The in situ monitoring records cover the internal settlement of the dam, the deformation and seepage flow of the galleries, and the ambient temperature. Based on actual engineering data, a numerical model considering the structure and filling method of dam, backfill area, and gallery was established, and the calculation parameters of rockfill material constitutive model were inverted by the direct back analysis method. The monitoring data analysis and numerical calculations showed that the long length of the gallery and the sudden drop of the ambient temperature were the main reasons for the longitudinal microcracks in the top arch of the galleries in the backfill area; the strong constraint of bedrock and the uneven settlement of backfill foundation were the root causes for the penetrating cracks in the galleries at the junction of backfill area and bedrock. In addition, the depth of the gallery embedded in the bedrock determines the deformation form (torsional deformation or bending deformation) of the galleries at the junction of the backfill area and bedrock. Based on the monitoring and numerical simulation, the long-term deformation of the galleries and the development of structural joints were also predicted.

Study of Cracking and Corresponding Treatment of Base Slab of Intake Tower in Hekoucun Reservoir

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Investigation and Control of Cracks in Wet Joint of Concrete Box Girders

3D Finite Element Simulation Analysis of Dam Seepage Based on Heat Conduction Theory

Optimum selection of temperature control measures for combined intake tower in alpine region during construction period

Numerical Simulation of Highway Tunnel Composite Lining Temperature Stress

Cause, Stability Analysis, and Monitoring of Cracks in the Gate Storehouse of a Flood Diversion Sluice

Cracking Risk and Overall Stability Analysis of Xulong High Arch Dam: A Case Study

Research on the Temperature Crack of Erosion- and Abrasion-resisting Concrete in Construction of the Jinghong Hydropower Project

NUMERICAL ANALYSIS ON DEFORMATION AND STRESS OF HIGH SLOPE OF INTAKE AND INTERACTION OF DAM-SLOPE AND TUNNEL AT HUGE HYDROPOWER PROJECT

Horizontal Cracking and Crack Repair Analysis of a Super High Arch Dam Based on Fracture Toughness

Study on temperature control for key components of high concrete dam

Treatment and Prevention on the Concrete Crack of Spillway Tunnels in Luding Hydropower Station

Analysis of Cause and Treatment of Cracks on Parapets of the Main Intake Structures of the "635" Water Conservancy Project

Analysis of the galleries cracking causes in the backfill area of pumped storage power station based on monitoring and numerical simulation: a case study of Hohhot upper reservoir

Study on Concrete Thermal Optimum Design of High Arch Dams

Numerical Analysis of Seepage for Concrete Face Rockfill Dam with Cracks Based on Block Equivalent Continuum Method

STUDY ON CRACKING AND STABILITY PROBLEMS OF HIGH ARCH DAMS ON COMPLICATED FOUNDATIONS

Temperature Control Study on Backfill RCC of Shenxigou Hydropower Project

Techniques and Development Trends of Temperature Control and Crack Prevention of Large-Scale Concrete Aqueducts

Application Research of Pipe Cooling Technique to Prevent Crack in Large-scale Aqueduct