Abstract:To study the heat transfer of pipe cooling process in concrete, an effective model combined with a radial basis function collocation method (RBFCM) is proposed. In this model, a replicable fictitious structure is imported that allows a set of fixed points to supersede the complicated adaptive remeshing or redistributing points, which significantly saves a lot of time and effort in the pre-processing of the numerical algorithm. Moreover, a relation between the mean temperature of water flow and the heat flux is derived from a heat balance equation. The validity of the proposed model is demonstrated in simulation of a typical three-dimensional problem. Numerical solutions are compared with those obtained by the finite element method and some experimental data. To find the optimum design, 32 cases involving 1 to 7 pipes under certain constraints are considered as follows: the quantity of water flow remains unchanged, the volume occupied by pipes keeps the same, and the same initial temperature of water is used for cooling. Since number, size, and positions of pipes are always changing during the design process, the ability of this approach is further illuminated. Finally, the effect of water flow with several conversing frequencies is investigated. As expected, the maximum temperature difference in concrete can be further controlled by enlarging conversing frequency. Numerical results reveal that the optimal design of pipe cooling system can not only minimize temperature, but also control temperature difference of the concrete structure. The process of design is useful for guidance of engineering practice to improve the structural safety and the economy of the whole building process.

Application Research of Pipe Cooling Technique to Prevent Crack in Large-scale Aqueduct

Techniques and Development Trends of Temperature Control and Crack Prevention of Large-Scale Concrete Aqueducts

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Research on the application of thermosyphon in temperature control of large concrete structures

Finite Element Simulation of Prevention Thermal Cracking in Mass Concrete.

Precise Simulation of Heat-Flow Coupling of Pipe Cooling in Mass Concrete

Numerical Simulation of Hydrated Heat Temperature Field of Massive Concrete

Sensitivity Analysis of Different Factors in the New Pipe Curtain Freezing Method under Seepage Conditions

Simulation Analysis of Reinforced Concrete Beam-Supported Aqueduct

Three-dimensional Numerical Modeling of Water Distribution Tunnels in Karst Area

Simulation Analysis of Large Volume Hydration Heat Effect of Anchor Foundation for Suspension Bridge

Cracking Analysis on Water Cooling Wall Pipe in Power Plant

Thermal corrosion fatigue crack growth behavior and life prediction of 304SS pipeline structures in high temperature pressurized water

Numerical Simulation Analysis of Temperature Control of Large Volume Concrete Aqueduct

Optimum selection of temperature control measures for combined intake tower in alpine region during construction period

Thermal effect and optimal design of cooling pipes on mass concrete with constant quantity of water flow

Intelligent Cooling Control Method and System for Mass Concrete

AXIAL CRACK ANALYSIS FOR THICK-WALL CENTRIFUGAL ROUGH PIPES

Study on Temperature Drop Effect Caused by Low-temperature Pouring of Concrete Dams

Simulation of the Temperature Field in Mass Concrete with Double Layers of Cooling Pipes During Construction

Study on temperature control for key components of high concrete dam