Abstract:High strength-elongation synergy and its dependence on microstructure are the eternal themes of metallic materials including Ti alloys. In this study, the relationship between the microstructure evolution and mechanical properties of the Ti-25Zr-4Al-1.5Mn (TZAM, wt. %) near-α Ti alloy was systematically investigated after hot rolling at temperatures ranging in the whole solid solution region. The content of primary α phase decreased gradually with the increasing of rolling temperature. An excellent comprehensive mechanical properties with a yield strength of 1055±10 MPa and a total elongation of 23.6±0.6% were obtained for the specimen after rolling at 750 °C (single α phase temperature region). This great strength-elongation synergy is mainly due to the synthetic action of substructure strengthening, dislocation strengthening, basal random heterogeneity (BRH) texture, and suitable content of β phase. The α" martensitic phase was formed after rolling at temperatures of 800 and 850 °C (α + β two-phase temperature region), resulting in a significant decrease in yield strength. However, remarkable work hardening with a rate of approximately 10 GPa occurred in both specimens. The whole evolution process of primary α grains, namely dynamic recovery and recrystallization during hot-rolled is deeply discussed. When the rolling temperature increased to 900 °C (single β phase temperature region), the dominated acicular α´ martensitic phase with high dislocation density resulted in an ultra-high strength (1264±12 and 1488±11 MPa for yield and tensile strength respectively) at the expense of plasticity. These findings revealed the microstructure evolution and its relationship to the mechanical properties of a TiZr-based alloy after the thermomechanical processing and helped to understand deeply the theory of metallic strengthening and elongation.

Strengthening Mechanism of Ti3Al/(alpha plus beta)Ti Dual Alloy's Joining Interface

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Intergrowth Bonding Mechanism and Mechanical Property of Linear Friction Welded Dissimilar Near‐Alpha to Near‐Beta Titanium Alloy Joint

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Tensile Properties and Fracture Mechanism of the Ti2AlC(0001)/TiAl(111) Interface: Insights from a First-Principles Study

Microstructure and deformation mechanism of dissimilar titanium alloy Ti600/Ti22Al25Nb weld joints strengthened by isothermal forging

Strengthening of Ti-6al-4v Alloy Forgings

Strengthening effects of Al element on strength and impact toughness in titanium alloy

Investigation of the mechanical properties of TiC particle-reinforced Al-Cu alloys: insights into interface precipitation mechanisms and strengthening effects

Achieving high strength-ductility synergy in a hierarchical structured metastable β-titanium alloy using through-transus forging

Structure and forming process of the Ti/Al diffusion bonding joints

α′′ phase-assisted nucleation to obtain ultrafine α precipitates for designing high-strength near-β titanium alloys

Interface characterization and formation mechanism of Al/Ti dissimilar joints of refill friction stir spot welding

Multiphase Strengthening of Al3Ti-based Intermetallic Alloy

Diffusion and mechanical properties of Ti2AlNb and TA15 interface: From experiments to molecular dynamics

Enhanced strength of dual-phase Ti6242 alloy via a heterogeneous microstructure

Integrated laser additive manufacturing of high-strength steel and Ti6Al4V: Experimental investigations and thermodynamic calculations

Interface and Properties of the Friction Stir Welded Joints of Titanium Alloy Ti6Al4V with Aluminum Alloy 6061

Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment

Tensile properties and fracture toughness of TiAl alloys with controlled microstructures

The Effect of the Forging Process on the Microstructure and Mechanical Properties of a New Low-Cost Ti-5Al-1.5Mo-1.8Fe Alloy