Abstract:This study presents the alloy development of a new class of L1 2 -strengthened Co-Al-Nb-based alloys with high gamma ' -solvus temperatures together with superb strengths at both ambient and elevated temperatures. The L1 2 -Co 3 (Al, Nb) phase was found to be in equilibrium with the gamma -Co matrix and the B2-CoAl phase in the ternary Co-10Al-3Nb alloy after an isothermal aging at 700 degrees C; however, it transformed into the Laves phase as the aging temperature increased to 800 degrees C. Alloying additions of Ni helped to suppress the B2 phase formation, resulting in a clean gamma - gamma ' dual-phase microstructure. Ti and Ta elements further stabilized the L1 2 structure and increased the gamma ' -solvus temperature to 1150 degrees C without inducing the formation of any other deleterious intermetallic phases. The newly developed Co-Al-Nb-Ni-Ti-Ta multicomponent Co-rich alloy has demonstrated outstanding yield strengths at both ambient and elevated temperatures, reaching 1023 +/- 27 MPa at 25 degrees C and 897 +/- 53 MPa at 700 degrees C, respectively. Furthermore, electron microscopy analyses uncovered unique deformation substructures, in which plasticity is predominantly carried out via nanoscale matrix-channel-confined stacking faults. As determined by the first-principle calculations, the absence of particle shearing upon deformation at ambient temperature is ascribed to the ultrahigh planar fault energies of the multicomponent gamma ' precipitates. High-density superlattice-stackingfault shearing and their interactions are responsible for the yield anomaly at 700 degrees C. These findings not only provide the fundamental understanding of the deformation behavior of the L1 2 -strengthened alloys, but also demonstrate the great potential for developing next-generation high-temperature structural materials based on the multicomponent Co-rich alloy systems.

Multiphase Strengthening of Al3Ti-based Intermetallic Alloy

Metastable state transformations of Al3Ti-base alloys during mechanical milling and subsequent annealing

The Role of In-Situ Al3Ti Formed During Solidification in Improving the High-Temperature Properties of Al-Cu Alloy

Strengthening Effect of Blocky Phases and Γ/γ Interface in the Directionally Solidified High-Nb-containing TiAl Alloy

α′′ phase-assisted nucleation to obtain ultrafine α precipitates for designing high-strength near-β titanium alloys

Achieving high strength in dual-phase Ti-6.4Al-4.4Mo-2.1Zr-0.6Si alloy using cluster formula design

Simultaneous Enhancements of Strength and Toughness by Multiscale Lamellar Structure in Ti 2 AlNb Based Intermetallic

Microstructure evolution and strength-toughness synergy mechanism in as-cast Ti-7Mo-4Al-3Nb-2Cr-2Zr-xTa alloy

Simultaneously Improved the Strength and Ductility of Cast Al-3Li-2Cu Alloy by Ti Addition and Heat Treatment

A Hierarchical and Multiphase Nanolaminated Alloy with an Excellent Combination of Tensile Properties

Microstructure and Mechanical Properties of Novel Ti-Al- Mn- W Alloy

Microstructure evolution and strength-toughness synergy mechanism in as-cast Ti-7Mo-4Al-3Nb-2Cr-2Zr-<i>x</i>Ta alloy

A Preliminary Research on the Mechanical Properties of TiAl+Ti5Si3 Dual Phase Alloys

Solidification Microstructure Evolution and Mechanical Properties of Casting Ti-48Al-2Cr-2Nb-(Ni,TiB2)Alloy

L1 2-strengthened multicomponent Co-Al-Nb-based alloys with high strength and matrix-confined stacking-fault-mediated plasticity

Heterogeneous Precipitate Microstructure in Titanium Alloys for Simultaneous Improvement of Strength and Ductility

Designing ultra-strong and ductile hierarchical titanium alloys via interstitial solute-mediated multi-morphologic α-nanoprecipitates

Composition design, microstructure and mechanical properties of novel multiphase Ti–Cu–Ni–Nb complex concentrated alloys

Design of Metastable Β-Ti Alloys with Enhanced Mechanical Properties by Coupling Αs Precipitation Strengthening and TRIP Effect

Simultaneously Enhancing the Strength and Ductility of Lamellar Ti–6Al–4V Alloy Via Designing Hierarchical 3D Nanolayered Structure

Microstructures and Mechanical Properties of Al–Zn–Mg–Cu Alloy with the Combined Addition of Ti and Zr