A Comparison of Spent Resin Degradation by Fenton and O3-Fenton Process

Wendong Feng,Jian Li,Kai Gao,Hongxiang An,Yunhai Wang

DOI: https://doi.org/10.1016/j.pnucene.2020.103566

IF: 2.461

2020-01-01

Progress in Nuclear Energy

Abstract:The treatment of spent resin generated by nuclear power plants using Fenton and O-3-Fenton process as an alternative to the present cementation method is an attractive solution. A comparison among O-3-Fenton and Fenton process for spent resin degradation were performed in this investigation. The different effects of reaction temperature and ozone concentration was compared between Fenton and O-3-Fenton process. In addition the resulted COD removal ratio, residue weight, iron ions concentration change, resin dissolution, degradation intermediates and final products were also compared in these two processes. The results showed that the addition of O-3 to Fenton process can improve the degradation ratio of spent resin. With an O-3 concentration of 161.3 mg/ L, the resin degradation ratio reached 97.1%. The residue COD of O-3-Fenton process was 60.0% lower than Fenton process. With O-3 addition, the dissolution rate of spent resin was reduced and the mineralization rate of dissolved organics increased by 19.3%. The residual organic matters in the final solution included mainly oxalic acid. The degradation of spent resin after dissolution conformed to the first-order kinetic equation in both Fenton and O-3-Fenton process. O-3-Fenton process could get better results and save processing costs.