Abstract:Background: Chlorophenols (CPs) constitute a group of organic pollutants that are introduced into the environment as a result of several man-made activities, such as uncontrolled use of pesticides and herbicides, and as byproducts in the paper pulp bleaching. Promising removal technologies of chlorinated aromatics consist in the application of advanced oxidation processes (AOPs) that can provide an almost total degradation of a variety of contaminants. Among these, wide application find Fenton systems based on generation of reactive species having a high oxidizing power, such as hydroxyl radical HO*. Our objective was that of determining the overall degradation efficiency of the model compound 2,4-dichlorophenol (DCP) by thermal Fenton-type oxidation systems with a view toward defining in more details relevant process parameters, the effect of reaction temperature and of co-catalyst Cu2+. Methods: Reaction conditions were similar to those generally adopted as optimal in many practical applications, i.e. pollutant/Fe2+ (as FeSO4) ratio ca. 20, Fe2+/Cu2+ (co-catalyst) 2:1, pH adjusted and controlled at pH 3, and H2O2 in excess (up to four-fold over the stoichiometric amount required for complete mineralization). Results and discussion: The results demonstrate that it is advantageous to carry out the reaction at a temperature markedly higher (70 degrees C) than ambient. The stepwise addition of H2O2 in aliquots yields an efficient transformation, while allowing a convenient control of the reaction exothermicity. Under these conditions, the essentially complete removal of the initial DCP is accomplished using just one equiv of H2O2 during 15 min; excess H2O2 (5 equivalents) yields extensive substrate mineralization. Also relevant, at 70 degrees C dechlorination of the initial DCP (and of derived reaction intermediates) is remarkably extensive (3-5% residual TOX), already with the addition of 1 equiv of H2O2. At the end of the reaction, IC and IC-MS analyses of the solution reveal that only low-molecular weight carboxylic acid (acetic, formic, oxalic, malonic, tartaric, etc.) contribute to the residual TOC. Conclusions: The whole of the results herein point to the advantage of performing the process at temperatures substantially higher than ambient (70 degrees C). Under the conditions adopted, almost complete degradation of the initial toxic compound can be achieved using hydrogen peroxide in fair excess (e.g., 3.5 equiv H2O2). Recommendations and outlook: In applying practical Fenton-type degradation systems to heavily polluted wastes, either for the pre-treatment of waters with a high COD value prior to biodegradation or for complete mineralization of pollutants, the set up of appropriate reaction conditions appears to be a key factor. Also, it is desirable to keep the concentration of iron salts within the lower limits in order to minimize the production and disposal of iron oxide sludges.

Fenton oxidative degradation of spent organic solvents from nuclear fuel reprocessing plant

Treatment of Tributyl Phosphate by Fenton Oxidation: Optimization of Parameter, Degradation Kinetics and Pathway

Degradation of the Mixed Organic Solvents of Tributyl Phosphate and N-Dodecane by Heterogeneous Fenton-like Oxidation Using Nanoscale Zero-Valent Iron As the Catalyst

Treatment of spent radioactive organic solvents from nuclear fuel reprocessing plant: Advances and perspectives

Effect of Fenton Oxidation on Biodegradability, Biotoxicity and Dissolved Organic Matter Distribution of Concentrated Landfill Leachate Derived from a Membrane Process

Degradation characteristics of four major pollutants in chemical pharmaceutical wastewater by Fenton process

Rapid and efficient degradation of tetrahydrofurfuryl alcohol and polyvinyl alcohol in complex organic low-level radioactive wastewater by Fenton oxidation

Optimization of Fenton treatment process for degradation of refractory organics in pre-coagulated leachate membrane concentrates.

Treatment of Spent Radioactive Anionic Exchange Resins Using Fenton-like Oxidation Process

Enhanced removal of refractory organic pollutants in wafer surface treatment wastewater by combining Fenton oxidation and O 3 /H 2 O 2 /FeOOH: Removal efficiency, intermediate composition, and toxicity prediction

Comparison of Fenton and Ozone Oxidation for Pretreatment of Petrochemical Wastewater: COD Removal and Biodegradability Improvement Mechanism

Decomposition of hydrogen peroxide in the remediation of trichloroethylene contaminated groundwater by Fenton oxidation technology

Technological process for treating radioactive TBP/OK spent solvents

Efficient removal of organic contaminants in real shale gas flowback water using Fenton oxidation assisted by UV irradiation: Feasibility study and process optimization

Fenton's Process for Simultaneous Removal of TOC and Fe2+ from Acidic Waste Liquor

Advanced treatment of secondary effluent organic matters (EfOM) from an industrial park wastewater treatment plant by Fenton oxidation combining with biological aerated filter

Treatment of spent radioactive cationic exchange resins used in nuclear power plants by Fenton-like oxidation process

Sustainable disposal of Fenton sludge and enhanced organics degradation based on dissimilatory iron reduction in the hydrolytic acidification process

Practical applications of the Fenton reaction to the removal of chlorinated aromatic pollutants. Oxidative degradation of 2,4-dichlorophenol

Enhanced degradation of gaseous benzene by a Fenton reaction

Degradation and phosphorus immobilization treatment of organophosphate esters hazardous waste by Fe-Mn bimetallic oxide.