Abstract:This study investigates the decolorization of two widely used textile dyes (Acid Black 172 (AB172) and Disperse Blue 56 (DB56) by using a combined sono-photo-electro-Fenton (SPEF) process. The effects of dye structure and processing factors on dye degradation from contaminated water and COD removal efficiency were determined by adopting response surface methodology. The results confirmed that current density, irradiation time, pH, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), and AB172 concentration had the most impacts on COD removal, respectively, whereas DB56 removal efficiency was highly dependent on the initial dye concentration and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}), compared to other processing factors. The dye degradation efficiency of 95.5% and COD removal efficiency of 91.6% for DB56 were obtained at optimum conditions of pH = 3, current density = 2 mA.cm−2, dye concentration = 200 ppm, ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.78 and irradiation time of 30 min. In the case of AB172, the same optimum conditions were found unlike reaction time of 50 min and ({ aise0.7exhbox{({{ ext{H}}_{{2}} { ext{O}}_{{2}} })} !mathord{left/ {vphantom {{{ ext{H}}_{{2}} { ext{O}}_{{2}} } {{ ext{C}}_{{0}} }}} ight.kern-0em} !lower0.7exhbox{({{ ext{C}}_{{0}} })}}) of 0.33, which resulted in the optimal dye degradation efficiency and COD removal of 97.4% 94.5%, respectively. These results verified that the type of dye and its structure can be a key factor in the Fenton-based degradation process. The comparison of the performance of different Fenton-based processes confirmed that the removal efficiency of electro-Fenton, sono-electro-Fenton, photo-electro-Fenton, and SPEF was 82–88%, 89.5–91%, 91.5–92.3% and 95.5–97.4%, respectively. The Fenton-based processes are highly effective methods that can be applied for water and wastewater treatment.Graphic

Comparison of o-toluidine degradation by Fenton, electro-Fenton and photoelectro-Fenton processes

Degradation Process and Kinetics Study of Actual Urotropine Wastewater by Fenton Method

Effect of the iron oxide catalyst on o-toluidine oxidation by the fluidized-bed fenton process

A New Insight into Fenton and Fenton-like Processes for Water Treatment.

Application of Classical Fenton Process and Advanced Photo Electro Fenton Process for the Degradation of COD from Wood Processing Wastewater: A Comparative Study

Degradation of Dyes in Aqueous Solutions by the Fenton Process

2,4-Dichlorophenol Degradation by an Integrated Process: Photoelectrocatalytic Oxidation and E-Fenton Oxidation

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Fenton Oxidation Kinetics of O-Chlorophenol Wastewater

Optimization of Fenton process for decoloration and COD removal in tobacco wastewater and toxicological evaluation of the effluent.

A highly energy-efficient flow-through electro-Fenton process for organic pollutants degradation

A Comparison of Central Composite Design and Taguchi Method for Optimizing Fenton Process

Multivariate optimization of methylene blue dye degradation using electro-Fenton process with self-doped TiO2 nanotube anode

Degradation of Oxytetracycline by Electrochemical, Fenton and Electro-fenton Processes Using SS316 and SS316/β-PbO2 Anodes: Process Optimization Using Rsm-ccd, Bioassay Test and Degradation Pathway

Degradation Kinetics and Mechanisms of Phenol in Photo-Fenton Process

Experiment study on the Fenton oxidation advanced treatment of bio-treated tannery wastewater

Optimization of Fenton treatment process for degradation of refractory organics in pre-coagulated leachate membrane concentrates.

Modeling and optimization of acid chrome dark blue degradation by Fenton using Box-Behnken Response Surface Methodology

Investigation and optimization of the performance of sono-photo-electro-Fenton process for removal of Acid Black 172 and Disperse Blue 56 from polluted water: comparison of the degradation activity with electro-Fenton-based processes

The Taguchi Approach in Studying and Optimizing the Electro-Fenton Oxidation to Reduce Organic Contaminants in Refinery Wastewater Using Novel Electrodes

Fe(III)–EDDS Complex in Fenton and Photo-Fenton Processes: from the Radical Formation to the Degradation of a Target Compound