Abstract:Gas foil bearings have bright application prospects in oil-free turbomachinery such as aircraft air cycle machines, compressors and gas turbines. To extend the applicability of foil bearings to high-speed and heavy-load systems, the axial force produced primarily by the pressure difference between the turbine and compressor sides must be taken into consideration. The thrust disc of the rotor is typically used to sustain the axial force and maintain the attitude of the rotor in a rotor-bearing system. In an analytical model used to predict the performance of gas foil thrust bearings (GFTBs), fluid–structure interaction must be considered because of the coupling effects of hydrodynamic lubrication and the compliance of bearing surface. In this study, a link-spring structural model was employed to calculate the equivalent vertical stiffness of the bump foil. This model exhaustively considered the effect of three factors: flexibility of the bump foil, interactions between bumps, and frictional forces at the contact surfaces. In addition, top foil deflection that directly affects film thickness is calculated using a finite-element shell model. The static and dynamic characteristics of GFTBs were predicted after solving the steady-state Reynolds equation and two linearized dynamic coefficient equations which were obtained with perturbation method by using finite-difference method. The structural deformation equation was substituted into the Reynolds equations in the calculation process. The calculated static load was compared with the published experimental data, and the results validated the theoretical analysis. Thereafter, the static and dynamic characteristics including impact of rotational speed, initial minimum film thickness and the ratio of the inlet to outlet film thicknesses were analyzed. Parametric studies were also conducted to evaluate the effect of different structural parameters of the bump foil and journal tilting on the static characteristics of GFTBs. Because the proposed analytical model is completely algebraic, it can be easily programmed for accurately and effectively investigating the performance of GFTBs.

Investigations on Start-Up Performances of Novel Hybrid Metal Rubber-Bump Foil Bearings

Numerical and experimental investigation on dynamic performance of bump foil journal bearing based on journal orbit

Investigations on Bearing Performances of Metal Rubber-Bump Foil Gas Journal Bearing with Three Structure Pads Integrating Stiffness and Damping

Tribological analysis of rotor system startup considering deformations of high elastic rubber bushings and grease lubricated plastic bearings

Experimental investigation for vibration reduction of surface-textured journal bearings

Parameter Effects on the Static Characteristics of the Multi-Foil Aerodynamic Journal Bearing with Bump-Backing Foils

Development and performance research of a new-type air foil bearing with combined bump foils

Experimental evaluation of tribo-performances of bump foil journal bearing with different materials of foil

Numerical and experimental investigation on the performance of hybrid porous gas journal bearings

Comparative studies on double-layered protuberant foil bearing and Hydresil foil bearing

The Influences of Parameters on the Dynamic Characteristics of a Multi-Foil Aerodynamic Journal Bearing with Bump-Backing Foils: Model Predictions

Numerical Investigation of the Performance of Aerostatic Journal Bearings

Numerical and Compact Model of Metal Mesh Foil Bearings

Prediction of Static Characteristics of Hydrodynamic Air Foil Bearing Considering Contact and Friction Between Foils

Dynamic Mixed Lubrication Investigation of Water-Lubricated Bearing With Unbalanced Rotor During Start-Up

Lubrication mechanism and characteristics of aerostatic bearing with close-spaced micro holes

Numerical Investigation of Bump Foil Configurations Effect on Gas Foil Thrust Bearing Performance Based on a Thermos-Elastic-Hydrodynamic Model

Parametric study on static and dynamic characteristics of bump-type gas foil thrust bearing for oil-free turbomachinery

CFD-based investigation and experimental study on the performances of novel back-flow channel aerostatic bearings

Investigations on the nonlinear dynamic characteristics of a rotor supported by hybrid foil magnetic bearings

Effects of bearing clearance and supporting stiffness on performances of rotor-bearing system with multi-decked protuberant gas foil journal bearing