Abstract:Chemical components of perovskite layers play a key role in improving the efficiency and stability of perovskite solar cells. Pure inorganic perovskites exhibit good thermal and light stabilities; however, the smaller radius of Cs+ leads to a poor perovskite phase stability. In this case, the Cs-rich (CH(NH2)(2))(x)Cs1-xPbI3 ((CH(NH2)(2)(+)=FA(+)) perovskite seems more promising because it simultaneously offers the above- mentioned properties, while not forming an unstable perovskite phase. Thus far, the synthesis of Cs-rich FA(x)Cs(1)(-)(x)PbI(3) perovskite has been realized by introducing excess formamidinium iodide (FAI) as an additive. However, FAI sublimates at a high temperature and excessive FAI sublimation necessitates even greater temperatures. Therefore, it is difficult to precisely control the ratio of the sublimated FAI from the perovskite film. Herein, the precise synthesis of Cs-rich FA(x)Cs(1)(-)(x)PbI(3) perovskites at relatively low sublimation temperatures using amine additives, such as methylammonium iodide (MAI), dimethylamine iodide (DMAI), ethylamine iodide (EAI), ammonium iodide (NH41), and formamidine acetate (FAAC), was studied. The reaction temperature was reduced when utilizing these additives. Moreover, the window period for the preparation has been widened, which is particularly important for the preparation of pure phase Cs-rich FA(x)Cs(1)(-)(x)PbI(3) perovskite films for large devices. In the experiment, perovskite FA(0.15)Cs(0.)(85)PbI(3) was selected because of its good stability. The reaction process of the additive that assisted perovskite preparation was studied. Firstly, 0.85 mmol of MAI, DMAI, EAI, FAAC, and NH4I each were added to 1 mmol of FA(0.15)Cs(0.)(85)PbI(3) solution. Then, the precursor solution was spin-coated and thermally annealed. The FA(0.15)Cs(0.)(85)PbI(3) films were formed by sublimation of the additives during thermal annealing. The influence of different additives on the film formation process was traced using X-ray diffraction (XRD) measurements and UV-visible absorbance spectra (UV-Vis abs). The results showed that MAI and DMAI could be used as additives in the preparation of FA(0.15)Cs(0.)(85)PbI(3) films. The strong intermolecular interaction between these additives and PbI2 could benefit the formation of Cs4PbI6 and prevent the formation of delta-CsPbI3. Cs+ is easier to migrate in Cs4PbI6 than in delta-CsPbI3, which provides a necessary condition for the ion exchange reaction. Simultaneously, the mild sublimation temperature of the additives ensured that the films maintain their perovskite phase. Finally, pure phase Cs-rich FA(x)Cs(1-x)PbI(3) perovskites were prepared using this method at a relatively lower temperature of 200 degrees C. The XRD and UV-Vis absorption results confirmed the precise synthesis of FA(0.15)Cs(0.)(85)PbI(3). The FA(0.15)Cs(0.)(85)PbI(3) solar cells synthesized with MAI and DMAI achieved the maximum power conversion efficiencies of 15.6% and 15.1%, respectively.

Synthesis Of Cs-Rich Ch(Nh2)(2))(X)Cs1-Xpbi3 Perovskite Films Using Additives With Low Sublimation Temperature

CsI Pre-Intercalation in the Inorganic Framework for Efficient and Stable FA 1- x Cs x PbI 3 (Cl) Perovskite Solar Cells.

Optimizing the Light-Humidity Stability of Formamidinium Halide Perovskites Through Intermediate Phase and Strain Stress Adjustment

Hot-substrate assisted deposition for Cs-rich α-Cs1-xFAxPbI2Br (0 ≤ x ≤ 0.4) films

Ultrafast Growth of High-Quality Cs 0.14 FA 0.86 Pb(Br x I 1– x ) 3 Thin Films Achieved Using Super-Close-Space Sublimation

Lewis Acid–Base Adducts for Efficient and Stable Cesium‐Based Lead Iodide‐Rich Perovskite Solar Cells

High-quality CsPbBr3 films prepared by introducing methylammonium iodide into PbBr2 precursor for efficient perovskite solar cells

High-efficiency and thermally stable FACsPbI3 perovskite photovoltaics

Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells

Controlling the Intermediate Phase to Improve the Crystallinity and Orientation of Cs3Sb2ClxI9‐x Films for Efficient Solar Cells

Interface modification effect on the performance of Cs<sub>x</sub>FA<sub>1-x</sub>PbI<sub>y</sub>Br<sub>3-y</sub> perovskite solar cells fabricated by evaporation/spray-coating method

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

Fabrication of high‐quality CsPbI3 perovskite films via phosphorus pentachloride additive

In Situ Synthesized Low-Dimensional Perovskite for >25% Efficiency Stable MA-Free Perovskite Solar Cells

Pureâ€�Iodide Wideâ€�Bandgap Perovskites for Highâ€�Efficiency Solar Cells by Crystallization Control

Fabrication and Characterization of FA x Cs 1− x PbI 3 Polycrystal Perovskite Solar Cells

Efficient Perovskite Solar Cells Fabricated Through CsCl-Enhanced PbI2 Precursor Via Sequential Deposition.

Controlled Crystallization and Enhanced Performance of γ‐CsPbI3 Perovskite Through Methylammonium Iodide‐Assisted Coevaporation

Ionic Liquid As an Additive for Two-Step Sequential Deposition for Air-Processed Efficient and Stable Carbon-Based CsPbI2Br All-Inorganic Perovskite Solar Cells

Phase‐pure Α‐Fapbi3 Perovskite Solar Cells via Activating Lead‐Iodine Frameworks

Sequential Introduction of Cations Deriving Large-Grain Cs(X)Fa(1-X)Pbi(3) Thin Film for Planar Hybrid Solar Cells: Insight into Phase-Segregation and Thermal-Healing Behavior