Abstract:Here, we report a scalable ultrasonic spray deposition under ambient conditions to fabricate a CsPbI2Br-based all-inorganic perovskite thin film for photovoltaic applications. With the cooperated aid of vacuum extraction of the as-fabricated perovskite film and the incorporation of lead(II) acetate (Pb(Ac)2) additive to the precursor solution, the quality of the perovskite film dramatically improved from the filled pinholes between the crystal grain with enhanced perovskite crystallinity. We found that the champion device for the 5% Pb(Ac)2-doped CsPbI2Br perovskite film combined with vacuum extraction achieved the best power conversion efficiency (PCE) of 10.06%, arising from the efficient defect dissipation within the film and the reduction in the charge recombination loss. Simultaneously, the thermal stability was boosted with the incorporation of Pb(Ac)2 after aging at 85 °C for 10 days. We believe that the spray-coating process combined with the optimization of the all-inorganic perovskite film will help in the fabrication of a photoabsorbing layer for the future industrial upscaling of perovskite solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00054?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00054</a>.Photograph and XRD patterns of the spray-coated CsPbI2Br perovskite film with vacuum-assisted thermal annealing; schematic illustration of the one-step spray-deposited perovskite films; forward and reverse scans of J–V curves; AFM images and UPS spectra of the spray-deposited CsPbI2Br perovskite film (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00054/suppl_file/ae1c00054_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Interface modification effect on the performance of Cs<sub>x</sub>FA<sub>1-x</sub>PbI<sub>y</sub>Br<sub>3-y</sub> perovskite solar cells fabricated by evaporation/spray-coating method

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Ultrafast Growth of High-Quality Cs 0.14 FA 0.86 Pb(Br x I 1– x ) 3 Thin Films Achieved Using Super-Close-Space Sublimation

Over 24% efficient MA-free CsxFA1−xPbX3 perovskite solar cells

Aqueous Synthesis of Α-Csx FA1-x PbI3 Microcrystals for Efficient Perovskite Solar Cells

CsI Pre-Intercalation in the Inorganic Framework for Efficient and Stable FA 1- x Cs x PbI 3 (Cl) Perovskite Solar Cells.

One-Step Spray-Coated All-Inorganic CsPbI 2 Br Perovskite Solar Cells

A Modified Hybrid Chemical Vapor Deposition Method for the Fabrication of Efficient CsPbBr3 Perovskite Solar Cells

“Coffee ring” controlment in spray prepared >19% efficiency Cs0.19FA0.81PbI2.5Br0.5 perovskite solar cells

Highly Crystalline CsPbI2Br Films for Efficient Perovskite Solar Cells Via Compositional Engineering

High-quality and full-coverage CsPbBr3 thin films via electron beam evaporation with post-annealing treatment for all-inorganic perovskite solar cells

Ultrahigh Fill-Factor All-Inorganic CsPbBr3 Perovskite Solar Cells Processed from Two-Step Solution Method and Solvent Additive Strategy

Interface Modification Via a Hydrophobic Polymer Interlayer for Highly Efficient and Stable Carbon-Based Inorganic Perovskite Solar Cells

Multifunctional Interface Modification Enables Efficient and Stable HTL-Free Carbon-Electroded CsPbI2Br Perovskite Solar Cells

CsF Improved Buried Interface for Efficient and Stable Inverted All-inorganic CsPbI2.85Br0.15 Perovskite Solar Cells

Elegant Face-Down Liquid-Space-Restricted Deposition of CsPbBr 3 Films for Efficient Carbon-Based All-Inorganic Planar Perovskite Solar Cells.

Highly efficient and stable FASnI3 perovskite solar cells with effective interface modulation by PEABr treated low-dimensional perovskite layer.

Ultra-smooth CsPbI2Br Film Via Programmable Crystallization Process for High-Efficiency Inorganic Perovskite Solar Cells

An Interface Co-modification Strategy for Improving the Efficiency and Stability of CsPbI 3 Perovskite Solar Cells

Fabrication and Characterization of FA x Cs 1− x PbI 3 Polycrystal Perovskite Solar Cells

High-quality CsPbBr3 films prepared by introducing methylammonium iodide into PbBr2 precursor for efficient perovskite solar cells