Abstract:<p class="a-plus-plus">Titanium alloy Ti–Al–Nb–Zr has high specific strength and becomes a promising structural material used in the deep sea. The excellent corrosion resistance of the alloy is derived from the protective passive film formed on its surface. By now, full agreement on interpretation of the anti-corrosion performance of the film in marine environment, especially in the deep sea, has not been reached. In this work, the electrochemical performance of two-surface-state Ti–Al–Nb–Zr alloys which are treated by mechanical polishing and anodizing pre-passivation in the simulated shallow sea, 1000 m and 3000 m deep sea environments, is investigated. By interpreting the electrochemical kinetic parameters, it is found that the dominant cathodic process becomes hydrogen evolution in simulated deep sea environments, but the reduction rate is restrained by high hydrostatic pressure, which arrests the passivation of the alloy. Assisted by X-ray photoelectron spectroscopy analysis, it is found that the passive film mainly consists of titanium oxides. There are intermediate oxides with non-stoichiometric ratio involved in the film formation due to the low dissolved oxygen concentration and low temperature. The results of Mott–Schottky and electrochemical impedance show that the film has <em class="a-plus-plus">n</em>-type semiconducting property with oxygen vacancies as the main point defects. The anti-corrosion performance in simulated deep sea environments is one order of magnitude lower than that in the simulated shallow sea environment. However, from 1000 to 3000 m, the corrosion resistance is reduced very slightly. In the inner layers of the passive film and the passive film formed in simulated deep sea environments, the proportion of low-valence titanium oxides is relatively high. The doping of low-valence titanium (Ti(II) or Ti(III)) results in a porous structure and ion permeability of the passive film, as well as relatively low corrosion resistance.</p>

Segregating the Homogeneous Passive Film and Understanding the Passivation Mechanism of Ti-based Metallic Glasses

Element-Resolved Corrosion Analysis of Stainless-Type Glass-Forming Steels

The Growth of Passive Membranes: Evidence from Ti and Like Metals

An Abnormal Correlation Between Electron Work Function and Corrosion Resistance in Ti-Zr-Be-(Ni/Fe) Metallic Glasses

Local Fine Structural Insight into Mechanism of Electrochemical Passivation of Titanium.

Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance

Effects of different elements on the passivation behaviour of Fe-based metallic glasses in the NaCl solution

The anisotropy of corrosion and passive behavior in selective laser melted Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Structure and Composition of the Passive Film Studied Using a Combination of X-Ray Photoelectron Spectroscopy, Secondary Ion Mass Spectrometry, and Scanning Transmission Electron Microscopy

Electrochemical Performance of Passive Film Formed on Ti–Al–Nb–Zr Alloy in Simulated Deep Sea Environments

Thickness-dependent Pitting Corrosion Behavior in Ni–Nb Thin Film Metallic Glass

Corrosion Resistance, Composition, and Stratification of Passive Films: Ni-22Cr and Ni-22Cr-6Mo Alloys Passivated and Exposure Aged in Acidic Chloride Solutions

Passivation Behavior of a Zr60Cu20Ni8Al7Hf3Ti2 Bulk Metallic Glass in Sulfuric Acid Solutions

Comparative Study on Passive Film Formation Mechanism of Cast and PBF-LB/M-TC4 in Simulated Physiological Solution

Enhancing corrosion and mechanical properties of 304 stainless steel by depositing and annealing Zr75Cu25 thin-film metallic glass

Properties of Passive Nano Films on Zircaloy-4 Affected by Defects Induced by Hydrogen Permeation

Microstructure and Antimicrobial Properties of Zr-Cu-Ti Thin-Film Metallic Glass Deposited Using High-Power Impulse Magnetron Sputtering

Enhanced Corrosion Resistance by Engineering Crystallography on Metals

Electrochemical Behavior of Laser Powder Bed Fusion (L-PBF) Ti–6Al–4V Alloy: Influence of Phase and Grain Boundaries on Surface Passive Film Formation

Formation and Properties of Zr/Ti Based Nano-Sized Non-Chromium Chemical Conversion Coating on AA 5083

Molybdenum effects on the stability of passive films unraveled at the nanometer and atomic scales