Abstract:Purpose The purpose of this paper is to fill the knowledge gap in the microscopic origin of high corrosion resistance in the passivated 316 L stainless steel. Design/methodology/approach Here, the pitting corrosion potential of the passivated 316 L stainless steel is measured, as well as the non-passivated one. Using the aberration-corrected scanning transmission electron microscopy, the microstructure of the passive film is unambiguously revealed. Combining the electron energy loss spectroscopy with the X-ray photoelectron spectroscopy, the depth profiling analysis is conducted and the variations in composition from the very surface of the passive film to the internal steel are clarified. Findings By optimizing the passivation treatment process, the authors significantly increase the pitting corrosion potential of the passivated 316 L stainless steel by 300 mV, compared with the non-passivated one. The passive film features a unique amorphous multilayer structure. On the basis of the depth profiling analysis, the origin of the high corrosion resistance achieved is unraveled, in which the redistribution of elements in the multilayer passive film, especially the enrichment of Cr in the topmost layer and Ni at the film-metal interface, prevent the oxidization of the inner iron of the steel. Originality/value This study advances understanding of the nature of the passive film from a microscopic view, which can be helpful for the further improvement of the corrosion resistance performance. Graphical This study introduces a model for the multilayer structure of passive films that reveals the reconstitution of the passive films after the opportune passivation treatments. Due to the redistribution of elements caused by passivation, the enrichment of Cr in the outer layer and Ni near the film-metal interface leads to enhance corrosion resistance performance.

The Growth of Passive Membranes: Evidence from Ti and Like Metals

Local Fine Structural Insight into Mechanism of Electrochemical Passivation of Titanium.

Segregating the Homogeneous Passive Film and Understanding the Passivation Mechanism of Ti-based Metallic Glasses

Transpassivation-induced structural evolution of oxide film on 654SMO super austenitic stainless steel

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Passivity study of titanium alloy TA2 in simulated seawater solution

Effects of oxygen adsorption on the corrosion behavior of the Ti(0001) surface: a DFT investigation

Computational chemistry analysis of passive layer formation and breakdown mechanisms in ferritic stainless steels

Atomic-Scale Modeling of the Dynamics of Titanium Oxidation

Effects of porosity in a model of corrosion and passive layer growth

Spatial Heterogeneities and Onset of Passivation Breakdown at Lithium Anode Interfaces

Atomistic mechanisms of water vapor–induced surface passivation

Microscopic origin of high corrosion resistance in 316L stainless steel by acidic passivation treatments

Metal Oxidation Kinetics and the Transition from Thin to Thick Films

The passivity of selective laser melted 316L stainless steel

Influence of sulfides on the passivation behavior of titanium alloy TA2 in simulated seawater environments

Studies on Pitting Corrosion of Al-Cu-Li Alloys Part III: Passivation Kinetics of AA2098-T851 Based on the Point Defect Model

Stainless steel surface structure and initial oxidation at nanometric and atomic scales

Transition between growth of dense and porous films: theory of dual-layer SEI

Structure and Composition of the Passive Film Studied Using a Combination of X-Ray Photoelectron Spectroscopy, Secondary Ion Mass Spectrometry, and Scanning Transmission Electron Microscopy

Molybdenum effects on the stability of passive films unraveled at the nanometer and atomic scales