Abstract:Corrosion results in large costs and environmental impact but can be controlled by thin oxide films that passivate the metal surfaces and hinder further oxidation or dissolution in an aqueous environment. The structure, chemistry, and thickness of these oxide films play a significant role in determining their anti-corrosion properties and the early-stage oxidation dynamics affect the properties of the developed oxide. Here, we use in situ X-ray Photoelectron Spectroscopy (XPS) to study the early-stage oxidation of a Ni-Cr-Mo alloy at room temperature and up to 400 °C. Cr and Mo begin to oxidize immediately after exposure to O 2 , and Cr 3+ , Mo 4+ , and Mo 6+ oxides are formed. In contrast, Ni does not contribute significantly to the oxide film. A self-limiting oxide thickness, which did not depend on temperature below 400 °C, is observed. This is attributed to the consumption of available Cr and Mo near the surface, which results in an enrichment of metallic Ni under the oxide. The self-limited oxide thickness is 6–8 Å, which corresponds to 3–4 atomic layers of cations in the oxide. At 400 °C, sublimation of Mo 6+ oxide is observed, resulting in the formation of an almost pure layer of Cr 2 O 3 on the alloy surface. Lastly, a mechanism is presented that explains the formation of the bi-layer oxide structure observed for Ni-Cr-Mo alloys, which involves the enhanced migration of hexavalent Mo ions in the electric field, which drives mass transport during oxidation according to both the Cabrera Mott model and the Point Defect Model.

Stainless steel surface structure and initial oxidation at nanometric and atomic scales

Defect-driven Selective Metal Oxidation at Atomic Scale.

Passivation mechanisms and pre-oxidation effects on model surfaces of FeCrNi austenitic stainless steel

Selective atomic sieving across metal/oxide interface for super-oxidation resistance

Microstructural understanding of the oxidation of an austenitic stainless steel in high-temperature steam through advanced characterization

High-temperature oxidation behaviour of nanostructure surface layered austenitic stainless steel

Surface Evolution At Nanoscale During Oxidation: A Competing Mechanism Between Local Curvature Effect And Stress Effect

Transpassivation-induced structural evolution of oxide film on 654SMO super austenitic stainless steel

Nanometer and sub-nanometer thin oxide films at surfaces of late transition metals

Current developments of nanoscale insight into corrosion protection by passive oxide films

Passivation-induced physicochemical alterations of the native surface oxide film on 316L austenitic stainless steel

Revealing atomic-to-nanoscale oxidation mechanisms of metallic materials

Structural Transformations and Tribological Effects in the Surface Layer of Austenitic Chrome-Nickel Steel Initiated by Nanostructuring and Oxidation

Dynamics of early-stage oxide formation on a Ni-Cr-Mo alloy

Microstructural evolution of early-stage oxide film on 15–15Ti austenitic stainless steel under 500 °C steam

Atomic scale understanding of initial Cu-Ni oxidation from machine-learning accelerated first-principles simulations and in situ TEM experiments

In situ determination of high-temperature oxidation evolution using micro-pillar array and scanning probe microscopy

Oxide surface science.

High-resolution characterization of the internal and external oxidation of austenitic alloys in supercritical water

Modelling the onset of oxide formation on metal surfaces from first principles