Abstract:This study aims to improve the performance of magnesium phosphate cement-based engineered cementitious composites (MPC-ECC) and establish a systematic design method. The MPC-ECC with ultra-high ductility was prepared with the polyethylene (PE) fibers. The effect of the magnesium oxide to potassium dihydrogen phosphate mass ratio (M/P), quartz sand particle size (Sd), water to solid mass ratio (W/S), sand to binder mass ratio (S/B), fly ash (FA) content and fiber volume fraction (Vf) on the micro-mechanical properties and macro-mechanical properties of MPC-ECC were explored. The macro-mechanical properties of MPC-ECC with different curing temperatures and curing ages were also tested. And the SEM test was carried out to analyze the morphology of the MPC-ECC. The results showed that the ultimate tensile strain of MPC-ECC with optimal proportion can reach 7.1%. Even curing at −10 °C for 7 days, the ultimate tensile strain can reach 5.6%, and the compressive strength can reach nearly 20 MPa. And the microstructure is characterized by a highly dense morphology. Additionally, with the increase of M/P, the compressive strength of MPC-ECC increases, but the ultimate tensile stress decreases. The MPC-ECC with the Sd of 150–180 mesh shows significant strain hardening performance, and its ultimate tensile strain can exceed 5%. The large W/S is helpful to improve strain hardening performance, especially when the S/B is 0.2. In addition, when the FA content is 30% or 40%, the strain hardening performance of MPC-ECC is significant. The quantitative association model between ultimate tensile strain and pseudo strain-hardening indices was established. According to the association model, the design method of MPC-ECC was established, based on which the MPC-ECC with desired ductility can be realized. Meanwhile, the PSH σ and PSH J are recommended to reach 2.15 and 25.1, respectively, at the same time for the MPC-ECC with ultimate tensile strain of above 3%.

Mechanical Performance of MgO-doped Engineered Cementitious Composites (ECC)

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Development of Reactive MgO Cement-Silica Fume–Based Strain-Hardening Engineered Cementitious Composite

Design and Performance of Cost-Effective Green Engineered Cementitious Composites with Low Drying Shrinkage and Self-Healing

Magnesium phosphate cement-based engineered cementitious composites with polyethylene fibers: Performance improvement and design method

Preparation and mechanical characterization of multi-functional high-ductility engineered magnesium oxysulfate cement-based composites

Feasibility Study of Strain Hardening Magnesium Oxychloride Cement-Based Composites

Multiscale Investigation on the Performance of Engineered Cementitious Composites Incorporating PE Fiber and Limstone Calcined Clay Cement (LC3)

Rheological, Deformation Behaviors and Mechanical Changes of Mgo-Containing Concretes with Different Strength

Characterization of Cost-Effective Green Engineered Magnesium Oxysulfide Cement-Based Composites (MOSC-ECC) Prepared by Replacing MgO in Magnesium Oxysulfate Cement with Slag

Investigation of the Mechanical Properties of Engineered Cementitious Composites with Low Fiber Content and with Crumb Rubber and High Fly Ash Content

Optimisation of the Mechanical Properties and Mix Proportion of Multiscale-Fibre-Reinforced Engineered Cementitious Composites

The Effects of Magnesium Borate Whiskers on the Mechanical Performance of Oil Well Cement

Understanding the Role of MgO Fineness on the Performance of Magnesium Phosphate Cement Through Multi-Scale Study

Influence of Zeolite Addition on Mechanical Performance and Shrinkage of High Strength Engineered Cementitious Composites

Effects of Different Mixing Ratio Parameters on Mechanical Properties of Cost-Effective Green Engineered Cementitious Composites (ECC)

Greener Engineered Cementitious Composite (ECC) – the Use of Pozzolanic Fillers and Unoiled PVA Fibers

A Experimental Study on Engineered Cementitious Composites (ECC) Incorporated with Sporosarcina pasteurii

Effects of magnesia expansive agents on the self-healing performance of microcracks in strain-hardening cement-based composites (SHCC)

Zeolite to Improve Strength-Shrinkage Performance of High-Strength Engineered Cementitious Composite

Durability Performance Investigation for Engineering Fiber Cementitious Composites (ECC): Review