Abstract:When planning tool orientations for 5-axis machining from the perspective of kinematics, existing works often tend to optimize the angular velocity or acceleration of the rotary axes rather than the angular jerk due to its calculation sensitivity to discretization variations, though the jerk is fundamentally tied to the tracking errors and residual vibrations of the actuators. In this paper, a study is reported on how to optimize the angular jerk of the rotary axes while comprehensively considering the kinematic constraints, thus achieving a jerk-optimal tool orientation along the tool path, with driving capacity of the rotary axes respected. In this method, the displacements of the rotary axes are continuously represented by two quintic B-spline curves, and then the angular velocity, acceleration, and jerk of the rotary axes, which are the derivatives of the displacements, can be succinctly represented as a B-spline curve. Taking advantage of the convex hull property of B-spline curve, the linear analytical representations of the kinematic constraints of the rotary axes can be successfully derived in form of control coefficient combinations. To prevent the machining interference at the same time, a greedy strategy that incorporates a process of alternately smoothing tool orientation and checking machining interference is employed. Then, the smooth displacement splines of the rotary axes can be obtained by solving a constructed quadratic programming (QP) model that minimizes the angular jerk along the tool path, while satisfying kinematic constraints and without machining interference. Moreover, to generate efficiently tool orientations for long tool paths, a piecewise planning strategy that optimizes the tool orientation from coarse to fine is developed. Finally, the conducted experiments validate the proposed method.

Tool Orientation Adjustment for Improving the Kinematics Performance of 5-Axis Ball-End Machining Via CPM Method

Kinematics Performance Oriented Smoothing Method to Plan Tool Orientations for 5-Axis Ball-End CNC Machining

A Cutter Orientation Modification Method for Five-Axis Ball-End Machining with Kinematic Constraints

Tool Orientation Optimization of 5-Axis Ball-End Milling Based on an Accurate Cutter/workpiece Engagement Model

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Kinematic Performance-Oriented Tool Orientation Optimization for a Hybrid Machining Robot in Five-Axis Ball-End Milling

Tool Orientation Optimization Based on Spatial Tractrix Method for Five-Axis CNC Machining with Ball End Cutters

A Global Tool Orientation Optimization Method for Five-axis CNC Machining of Sculptured Surfaces

Tool Orientation Sequence Smoothing Method Based on the Discrete Domain of Feasible Orientations

Jerk-Optimal Piecewise Planning of Tool Orientation for 5-Axis Ball-End Machining with Linearized Kinematic Constraints

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Simultaneous Optimization of the Feed Direction and Tool Orientation in Five-Axis Flat-End Milling

Tool Orientation Optimization Considering Second Order Kinematical Performance of the Multi-Axis Machine

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Tool orientation optimization for the five-axis CNC machining to constrain the contour errors without interference

A Parameter Zone Subdivision Method for Rotary Axes Motion Optimization in Five-Axis Toolpath Generation Using Inverse Evaluation Mechanism

On the workpiece setup optimization for five-axis machining with RTCP function

Research on Local Optimization Algorithm of 5-Axis CNC Machining Tool Axis Vector Based on Kinematic Constraints

A Convenient Method to Solve Rotation Angle in 5-Axis Machine Tool Post-Processing

A GPU-based Tool Parameters Optimization and Tool Orientation Control Method for Four-Axis Milling with Ball-End Cutter

Generating Collision-Free Tool Orientations For 5-Axis Nc Machining With A Short Ball-End Cutter