Abstract:Prominent interfacial bonding can significantly improve the stress transfer efficiency between carbon fibers and matrix, which is the basis of efficient and long-term application of composites. In this paper, a bicomponent collaborative strategy was proposed to fully utilize the advantages of silicon nitride nanowires (SNs) and carbon nanotubes (CNTs) to optimize the interfacial strength of carbon fiber modified double matrix composites (CD), in which the double matrix was represented by polymers-hydroxyapatite and pyrocarbon-hydroxyapatite. The microstructure displayed that SNs were randomly distributed inside CD and completely wrapped by CNTs, which combined to form an interlocking structure. The mechanical and friction behavior of modified and unmodified composites was investigated. The compression strength and shear strength of CNTs-SNs modified carbon fiber/polymers-hydroxyapatite composites were 110 ± 2.39 MPa and 56 ± 1.13 MPa, displaying an increment of 69% and 87%. The wear rate was 0.4 × 10 −14 ± 0.008 m 3 N −1 m −1 , exhibiting a 61% decline. The fracture morphologies were observed to analyze the strengthening mechanism. Interlocked CNTs-SNs could strengthen the effective bonding of fiber/matrix interface and SNs/matrix interface, provide lots of nucleation sites for the matrix, and enhance the matrix cohesion. The enhancement was further verified by a 56% increase in the compression strength (237 ± 4.67 MPa), a 235% increase in the shear strength (77 ± 1.53 MPa), a 78% decrease in wear rate (0.38 × 10 −13 ± 0.011 m 3 N −1 m −1 ) of CNTs-SNs modified carbon fiber/pyrocarbon-hydroxyapatite composites, indicating that CNTs-SNs played an indispensable role in making CD possess brilliant mechanical and biological friction properties.

The Control of Interfacial Bonding State and Optimization of Mechanical Properties of Si3N4f/BN/Si3N4 Composites Via Different Synthesis Technologies

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Mechanical Properties of 3D KD-I SiCf/SiC Composites with Engineered Fibre–matrix Interfaces

Influence of fiber surface properties of SiCf/SiC composites on the interfacial debonding behavior

Effect of BN interfacial layer on the mechanical behavior of SiC fiber reinforced SiC ceramic matrix composites

Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites

Microstructure control of BN interface and its effect on mechanical behavior of SiC f /SiC composites

Influences of the dip-coated BN interface on mechanical behavior of PIP-SiC/SiC minicomposites

Residual stress and interface debonding behavior in Si3N4w reinforced SiCN composites prepared by the PIP process: A case study

Synthesis of coatings on SiC fibers and their effects on microstructure and mechanical properties of SiC f /SiBCN composites

Control of Composition and Structure in Laminated Silicon Nitride/Boron Nitride Composites

Mechanical Properties and Failure Behavior of 3D-SiCf/SiC Composites with Different Interphases

Boron nitride (BN) and BN based multiple-layer interphase for SiCf/SiC composites: A review

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Mechanical properties of SiCf/SiC composites with h‐BN interphase formed by the electrophoretic deposition method

Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes

The Effect of PyC/SiC Compound Interphase on the Properties of PIP SiC/SiC Composite

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites

Study on the fiber/matrix interface modification of Si3N4 f/SiO2 composites with polymer derived double-layer coatings

Interface design of carbon fiber composites by fabricating interlocked carbon nanotubes-silicon nitride nanowires