Abstract:The alkali metal poisoned CuNbTi and VWTi catalysts were prepared by wetness impregnation method. Poisoning effects of various K2O mass ratios (0.1%-2%) on CuNbTi and VWTi catalysts were studied, respectively. CuNbTi exhibited an excellent alkali metal resistance that 2%K2O-CuNbTi still remained 80% NOx conversion efficiency and 98% N-2 selectivity while 2%K2O-VWTi was completely deactivated. Moreover, different alkali metals (K, Na, Ca, Mg) with the same molar ratio were doped on CuNbTi. The poisoned degree followed the order: K2O > Na2O > CaO > MgO. Then 2%K2O-CuNbTi and 2%K2O-VWTi were selected for follow-up study. To understand the poisoning mechanism, further investigations were performed by SEM, XRD, N-2-physisorption, XPS, EPR, NH3-TPD, Py-IR, H-2-TPR, in situ DRIFTS characterizations and DFT calculations. The particle of CuNbTi and VWTi agglomerated and the surface area decreased after 2%K2O loading. Loss of acid sites and drop of reducibility resulted in the deactivation of 2%K2O-VWTi. By contrast, experimental and computational results indicated that the alkali resistance of 2%K2O-CuNbTi was mainly due to the interaction between Ti2NbOx support and K atoms that K atoms were preferentially bound to Nb OH and Nb=O with a lower bonding energy of -2.33 eV- -2.83 eV when Cu atoms were coordinated to Ti=O with a binding energy of -1.54 eV. This protected the active copper species from linking to K2O and the weak acid sites were preserved with the increasing isolated Cu2+. Ti2NbOx weakened the impact of potassium on NH3 adsorbing over the catalyst while the preserved copper species provided adsorption sites and redox ability for NH3-SCR reaction. Hence, the synergetic effect of copper and niobium species contributed to the alkali metal resistance. Ti2NbOx trapped the potassium and retained active copper species over 2%K2O-CuNbTi catalyst while potassium deactivated both TiO2 and active vanadium species on 2%K2O-VWTi catalyst. Meanwhile, both Eley-Rideal (E-R) and Langmuir-Hinshelwood (H-L) mechanisms with adsorbed NH3 coordinated to the Lewis acid sites and bidentate nitrate as the dominating intermediate species existed during the NH3-SCR reaction procedure over 2%K2O-CuNbTi at 225 degrees C.

Regeneration of Alkali Poisoned TiO2-based Catalyst by Various Acids in NO Selective Catalytic Reduction with NH3

Regeneration of Potassium Poisoned Catalysts for the Selective Catalytic Reduction of NO with NH3

The Alkali Resistance of CuNbTi Catalyst for Selective Reduction of NO by NH3: A Comparative Investigation with VWTi Catalyst

Mechanism and regeneration of sulfur-poisoned Mn-promoted calcined NiAl hydrotalcite-like compounds for C3H6-SCR of NO

The Poisoning Effect of Alkali Metals Doping over Nano V2O5–WO3/TiO2 Catalysts on Selective Catalytic Reduction of NOx by NH3

The Poisoning Effect of Na+ and Ca2+ Ions Doped on the V2O5/TiO2 Catalysts for Selective Catalytic Reduction of NO by NH3

Alkali Metal Poisoning of A Ceo2-Wo3 Catalyst Used in the Selective Catalytic Reduction of Nox with Nh3: an Experimental and Theoretical Study

Potassium Poisoning of Titania Supported Denox Catalysts: Preservation of Vanadia and Sacrifice of Tungsten Oxide

Regeneration of Selective Catalyst Reduction Catalysts Deactivated by Pb, As, and Alkali Metals

Insights into the Effects of Sulfate Species on CuO/TiO2 Catalysts for NH3-SCR Reactions

An Efficient Novel Regeneration Method for Ca-poisoning V2O5-WO3/TiO2 Catalyst

Support promotion effect on the SO2 and K+ co-poisoning resistance of MnO2/TiO2 for NH3-SCR of NO

Novel Methods for Assessing the SO2 Poisoning Effect and Thermal Regeneration Possibility of MOx-WO3/TiO2 (M = Fe, Mn, Cu, and V) Catalysts for NH3-SCR

Mechanism of Arsenic Poisoning on SCR Catalyst of CeW/Ti and Its Novel Efficient Regeneration Method with Hydrogen

Chemical Poison and Regeneration of SCR Catalysts for NO X Removal from Stationary Sources

Regeneration Of Commercial Scr Catalysts: Probing The Existing Forms Of Arsenic Oxide

Alkali poisoning of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3

Ti3+ doped V2O5/TiO2 catalyst for efficient selective catalytic reduction of NOx with NH3

A dual-functional way for regenerating NH3-SCR catalysts while enhancing their poisoning resistance

In situ regeneration of sulfated Cu/SAPO-34 catalyst for the selective catalytic reduction of NOx with NH3

Poisoning mechanism and regeneration process of the denitration catalyst