Abstract:In this study, an in-house developed fully compressible solver utilizing high-order numerical discretization schemes is used to study the effects of swirl intensity on thermoacoustic instabilities in a lean premixed swirl stabilized combustor. Turbulent combustion modeling is achieved using large eddy simulations along with dynamically thickened flame combustion model. Obtained results reveal that there are two critical burner swirl numbers in which the combustor dynamics change drastically. Results show that the combustor is stable at low swirl numbers (S ≤ 0.5). However, as the swirl intensity increases, the combustor experiences thermoacoustic instabilities. The first critical swirl number lies within the range of 0.5–0.6, in which a transition occurs in the combustor dynamics from a state of stable operation to thermoacoustic instabilities. The second critical swirl number (S = 0.9) corresponds to the transition of different thermoacoustic instability modes. The combustor experiences limit cycle instabilities coupled with the first tangential acoustic mode of the combustor for 0.6 ≤ S < 0.9, while for S > 0.9 the instabilities are burst like and coupled with the second tangential acoustic mode of the combustor. The combustor experiences instabilities coupled with both the first and the second tangential modes, when the burner swirl number is 0.9. In order to evaluate key parameters inducing the thermoacoustic instabilities, heat release fluctuations are calculated through hydrodynamic flow features (central and side recirculation zones, coherent structures, and precessing vortex core). Investigations show that all the above features contribute almost equally in inducing heat release fluctuations in-phase with the acoustic perturbations at low swirl numbers. However, as the swirl number increases, side recirculation zone and coherent structures play the key role in producing heat release fluctuations in-phase with the acoustic perturbations, while central recirculation zone has the least effects on driving the instabilities.

Effects of Different Active Control Strategies on Combustion Instability Decay Time, Actuator Voltage, and Damping Ratio

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Experimental Investigation on High Frequency Perturbation to Combustion Instability by Low Frequency Actuator in a Backward-facing Step Combustor

Experimental Study on Self-Excited Thermoacoustic Instabilities and Intermittent Switching of Azimuthal and Longitudinal Modes in an Annular Combustor

Combustion Instability Detection Based on Multi-Signal Information Fusion for an Industrial Gas Turbine Combustor

Effect Of Carbon Dioxide, Argon, And Helium Jets On The Synchronous Control Of Combustion Instability And Nox Emission

Effects of Operating Parameters on the Combustion Oscillation Behaviour in a Lean Premixed CH4 Combustor

Thermoacoustic instabilities: Modeling and control

Optimal Control of Turbulent Premixed Combustion Instability with Annular Micropore Air Jets

Acoustic Control of Thermoacoustic Instabilities Using Experimental Model-Based Controllers

Predicting thermoacoustic stability characteristics of longitudinal combustors using different endpoint conditions with a low Mach number flow

Active Control of Combustion Instabilities Using Model-Based Controllers

Low Frequency Beating Instability in a Rijke Burner and its Active Control

Thermoacoustic Instability Drivers and Mode Transitions in a Lean Premixed Methane-Air Combustor at Various Swirl Intensities

A Review of Active Control Approaches in Stabilizing Combustion Systems in Aerospace Industry

Active suppression of swirl-stabilized combustion instability

Effects of Different Preheated CO2/O2 Jet in Cross-Flow on Combustion Instability and Emissions in a Lean-Premixed Combustor

Investigation of the Control Effects of the Transverse Jet on the Thermoacoustic Instability in the Rijke Combustor

Dilution Effects of CO2, Ar, N2 and He Microjets on the Combustion Dynamic and Emission Characteristics of Unsteady Premixed Flame

Controlling Thermoacoustic Instability in a Swirl Combustor Based on a Transverse Jet

Feedback control of combustion oscillations in combustion chambers