Abstract:The novel polyurethane/montmorillonite (PU/MMT) nanocomposites based on poly (propylene oxide) glycol (POP), 4,4′-diphenymethylate diisocyanate (MDI), 1,4-butanediol (1,4-BD) and MMT has been synthesized using a one-step direct polymerization-intercalation technique by twin-screw extruder. Its structure and thermal properties are characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and High-resolution electron microscopy (HREM), Fourier-transform infrared spectroscopy (FTIR) and Thermogravimetry analysis (TGA), respectively. The results of XRD and HREM analyses show that the silicate layer is well dispersed in PU matrix and this mesostructure can be considered as a delaminated nanocomposites. The TGA analysis indicates that the thermal stability properties of the PU/MMT nanocomposites are increased slightly compared with the pristine PU, due to the increase of the char residue. The mechanical and flammability performances are examined by electronic Universal Tester and Cone calorimetry, respectively. The layered silicate, which acts as a high aspect ratio reinforcement, enhances tensile strength of the PU. Specifically, there is a 25% increase in the tensile strength of PU nanocomposites containing 4 wt.% MMT compared with that of pristine PU. However, the elongation at break of PU/MMT nanocomposites is lower than that of pristine PU. The loading of MMT leads to the remarkably decrease of heat release rate (HRR), contributing to the improvement of flammability performance.

Thermal Stability and Oxygen Resistance of Polypropylene Composites with Fullerene/montmorillonite Hybrid Fillers

Thermal and thermo-oxidative degradation of high density polyethylene/fullerene composites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Thermal Degradation and Flammability Properties of HDPE/EVA/C60 Nanocomposites

Study on thermal stability of PP/MMT nanocomposites

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Thermal degradation and flame retardancy of polypropylene/C60 nanocomposites

Thermal Properties and Thermal Stability of PP/MWCNT Composites

Largely Enhanced Thermal and Mechanical Properties of Polymer Nanocomposites Via Incorporating C60@graphene Nanocarbon Hybrid

Synthesis and Characterization of Thermoplastic Polyurethane/montmorillonite Nanocomposites Produced by Reactive Extrusion

Properties Optimization of Polypropylene/Montmorillonite Nanocomposite Drawn Fibers

Thermal Stability and Rheological Behaviors of High-Density Polyethylene/fullerene Nanocomposites

Synergistic Flammability and Thermal Stability of Polypropylene/aluminum Trihydroxide/fe‐montmorillonite Nanocomposites

Preparation and Thermal Characteristics of Silane-Grafted Polyethylene/montmorillonite Nanocomposites

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Combustion Properties of Polypropylene/montmorillonite Nanocomposites

Molybdenum Disulfide Nanosheets As Barrier Enhancing Nanofillers in Thermal Decomposition of Polypropylene Composites

Fabrication of Fullerene Decorated by Iron Compound and Its Effect on the Thermal Stability and Flammability for High‐density Polyethylene