Abstract:As a new element of flame, tubular flame especially the swirl type has excellent flame characteristics such as negligible heat loss, aerodynamic stability and thermodynamic stability. The premixed swirl type tubular flame has been extensively studied through a variety of burners, and various applications have been proposed and demonstrated for determining the flammability limits, stabilizing a flame in a high speed flow, and obtaining a uniform and large-area laminar flame to heat iron slab or to reduce steel sheet surface. To avoid potential hazards of flame flash back even detonation in premixed mode, an inherently safe technique of rapidly mixed tubular flame combustion has proposed, in which the fuel and the oxidizer are individually and tangentially injected into a cylindrical burner from four rectangular slits. Recently this burner has been successfully adopted to investigate the characteristics of oxygen enhanced combustion of methane, which provides a useful tool to save energy and reduce emissions. The results illustrate that the mixing of fuel and oxidizer plays a vital role in obtaining a stable tubular flame. To fundamentally investigate the flow field especially the mixing process in the rapidly mixed tubular flame burner, a series of measurements have been made on the flow visualization and velocity distribution with a Particle Image Velocimetry (PIV) system. Two groups of optically accessible quartz burners were designed: in the first group, the width of the rectangular slit was maintained as 2 mm while the length varied from 8 to 64 mm, in which the swirl number (Sw) varied from 2.75 to 0.34; in the second group, the slit width increased from 1 to 3 through 2 mm while maintaining the slit length as 8 mm, in which the swirl number decreased from 5.89 to 1.70 through 2.75. The total flow rate and the mean injection velocity ratio of fuel inlet to oxidizer inlet were also varied to measure the mixing layer thickness through flow visualization in a cross section perpendicular to the tube axis around the center of the burner. Detailed observation shows that the mixing layer thickness around the inlet is dominated by a boundary layer type flow regardless of swirl number and injection velocity ratio. The coefficients for the thickness estimation based on the square root of injection velocity (in reverse relationship) have been summarized. In addition, for a constant total flow rate, the mixing is fastest when the mean injection velocity of each inlet is the same. The flow visualization and the axial velocity distribution in a plane containing the tube axis were also analyzed to illustrate the flow motion downstream of the injection slits. The results demonstrate that a reverse flow appears in the burners of swirl number larger than 0.60.

An Experimental Investigation on Flame Stability and Lean Extinction Limit in Tubular Flame Burners Operating on Jet Fuel

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Experimental Investigation of the Flame Front Propagation Characteristic During Light-round Ignition in an Annular Combustor

Investigation on a Novel Type of Tubular Flame Burner with Multi-stage Partially-Premixing Features for Liquid-Fueled Gas Turbine

Experimental Investigation of Low-Temperature Autoignition in Turbulent Premixed Swirling Flames

Experimental Study on Combustion Stability Characteristics in Liquid-Fueled Gas Turbine Model Combustor: Fuel Sensitivities and Flame/flow Dynamics

Flamelet LES of Turbulent Premixed/stratified Flames with H2 Addition

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Flame Structure Analysis and Flamelet Modeling of Turbulent Pulverized Solid Fuel Combustion with Flue Gas Recirculation

Thermoacoustic Instability Characteristics and Flame/Flow Dynamics in a Multinozzle Lean Premixed Gas Turbine Model Combustor Operated with High Carbon Number Hydrocarbon Fuels

Experimental Study on Flame Stability and Thermal Performance of an n-Heptane-Fueled Microscale Combustor

Ultra-rich Fuel Dynamics of a Holder-Stabilized Premixed Flame in a Preheated Mesoscale Combustor

Stability and Emissions of Hydrogen-Enriched Methane Flames on Metal Fiber Surface Burners

Oxy-Fuel Combustion of Methane in a Rapidly Mixed Tubular Flame Burner

Flame Interaction and Stabilization Mechanisms in a Dual Premix Swirl Combustor with a Pilot Bluff Body

Experimental Investigation of Convergent and Convergent-Divergent Micro Swirling Flame Behavior and Stabilization

Effects of Fuel Variation and Inlet Air Temperature on Combustion Stability in a Gas Turbine Model Combustor

An Experimental Study on the Flow Visualization in Rapidly Mixed Tubular Flame Burners of Various Swirl Numbers

Flame investigations of a laboratory-scale CECOST swirl burner at atmospheric pressure conditions

Dynamics of Methane/air Premixed Flame in a Mesoscale Diverging Combustor With/without a Cylindrical Flame Holder

Experimental investigation on the combustion characteristics and thermoacoustic instability of liquid spray flame with blended fuel