Ultralean Combustion Mechanism of Methane–Air Swirling Premixed Flame
Yuyang Jiang Kazunori Warabi Akane Uemichi Makihito Nishioka a Department of Engineering Mechanics and Energy,University of Tsukuba,Ibaraki,Japanb Department of Mechanical Engineering,Yamaguchi University,Yamaguchi,Japan
DOI: https://doi.org/10.1080/00102202.2024.2415324
IF: 1.9
2024-10-18
Combustion Science and Technology
Abstract:This study investigated a methane – air premixed flame in a partially tapered swirl burner. Experimentally, we succeeded in forming almost steady ultralean flames with an equivalence ratio as lean as 0.465. On the other hand, a numerical simulation of the flame with detailed chemistry revealed that the flame head existed in a large recirculation zone under ultralean conditions. In addition, high-value peaks of temperature, heat-release rate (HRR), and concentrations of OH, O, and H radicals were formed at the flame head, enabling ultralean combustion. Subsequently, to identify the formation mechanism of these peaks, adiabatic swirl burner flames were simulated with and without the effect of thermal-diffusive imbalance (a Lewis number effect). The results show that a Lewis number of less than unity caused a temperature increase in the flame located in the recirculation zone owing to the thermal-diffusive imbalance, which increased the peak heights of the HRR and the three radicals. The results also showed that even in a flame unaffected by thermal-diffusive imbalance, the backward convective transport could accumulate CO and OH at the flame head thus enhancing the chemical reactions at the head. (185 words)
energy & fuels,engineering, chemical,thermodynamics, multidisciplinary