Abstract:When gold was leached using copper ammonia thiosulfate solution, the dissolution rate of gold decreased as the leaching time increased. The dissolution of gold powder with 44 and 77 μm particles was studied,and the results indicated that the dissolution rate was not decreased by surface passivation or the decrease in copper concentration but by the changes of the electronic structure of the gold surface caused by the change in the exposed crystal surface. The transmission electron microscopy images of the gold powder revealed that the high-index (220) and (311) crystal surfaces almost disappeared during leaching. Furthermore, the surface of gold consisted mainly of the low-index (111) crystal surface during the later stages of leaching. Owing to the changes in crystal surface, the work function of the gold surface increased from 6.56 to 6.95 eV, and the increase in work function hindered the loss of electrons from the gold surface. When cobalt was used to modify the gold surface, the work function decreased from 6.56 to 5.99 eV. The leaching results indicated that the cobalt modification increased gold dissolution, and the gold leaching percentage was increased by 40% within 8 h. the tendency of gold to dissolve more easily after it underwent surface modification was confirmed by the apparent activation energy of the surface-modified being lower than that of the fresh gold powder, the formation of intermediate products of Co3O4 with high oxidation ability and the galvanic interaction between cobalt and gold electrodes. Dry-grind was applied for gold concentrate calcine and different contents of cobalt powder to study the possibility of industrial application of this effect. The results showed that only adding 50 mg cobalt to 100 g gold ores was beneficial to gold leaching

Gold-leaching performance and mechanism of sodium dicyanamide

Highly Efficient Recovery of Au(I) from Gold Leaching Solution Using Sodium Dimethyldithiocarbamate

Reagent Elution Combined with Positive Pressure Filtration: A Zero-Discharge Method for Cyanide Tailings Remediation

Efficient and stable leaching of gold in a novel ethydiaminedhephen acetic-thiosulfate system

Enhanced Hydrometallurgical Pretreatment of Micro-disseminated Gold Ore

Method for improving adsorption capacity of gold(I) thiosulfate complex on mercapto-functionalized silica gel by masking copper with ethylenediamine

Effectively adsorb Au(S2O3)23− using aminoguanidine as trapping group from thiosulfate solutions

Synergistic detoxification by combined reagents and safe filling utilization of cyanide tailings

Increase in gold dissolution in copper ammonia thiosulfate solution via cobalt surface modification

Study on Synergistic Strengthening of Gold Extraction with Copper Ethylenediamine Thiosulfate Using Pyrite and Nickel Ions

Effect of sodium carbonate on alkaline self-leaching of gold from flotation gold ore

Experimental Research on Micro-disseminated Gold Ore Pretreated by Alkaline and Non-cyanide Leaching

Sustainable and effective gold(I) separation from aurocyanides wastewater and its mechanism using guanidinium ionic liquids

Computational Chemistry and Electrochemical Studies of Adsorption Behavior of Organic Additives during Gold Deposition in Cyanide-free Electrolytes

Solvent Extraction Of Gold From Alkaline Cyanide Solution By Primary Amine N1923

Kinetics of simultaneous recovering of Au and Ag from CTs by chloridizing volatilization methods

Experimental and theoretical studies of DMH as a complexing agent for a cyanide-free gold electroplating electrolyte

Morphology Modulation of Cu2S Nanoparticles for Cleaner Au (III) Recovery from Aqueous Media: Excellent Capacity, Illustrious Selectivity

Ultrahigh and selective adsorption of Au(III) by rich sulfur and nitrogen-bearing cellulose microspheres and their applications in gold recovery from gold slag leaching solution

Electrochemical behavior of gold dissolution with a novel eco-friendly synthetic gold lixiviant

Selective gold extraction from electronic waste using high-temperature-synthesized reagents