Abstract:The effective recovery of Au(S 2 O 3 ) 2 3− from leachates using thiosulfate gold extraction techniques remains challenging. Metal cementation can be efficiently used to recover Au(S 2 O 3 ) 2 3− , but is easily affected by the oxidant (Cu(II)) in solution, leading to problems such as high consumption of the reduced metals and copper–gold co-precipitation. Copper powder cementation can prevent the co-precipitation of copper in solution to improve the grade of the gold product and also supplement the oxidant in the solution, thereby enhancing the cyclic leaching of gold into the solution, which can reduce production costs. In this study, copper powder was used to recover gold ions and the results showed that the gold cementation rate was negatively correlated with the Cu(NH 3 ) 4 2+ concentration. In order to weaken the negative influence of Cu(NH 3 ) 4 2+ , this study proposes the application of a reduction voltage to convert Cu(NH 3 ) 4 2+ in solution to Cu(S 2 O 3 ) 3 5− before adding copper powder. After applying a reduction voltage of 0.14 V to a solution of 5 mmol/L CuSO 4 , 0.5 mol/L NH 3 , 0.1 mol/L Na 2 S 2 O 3 , and 10 mg/L Au(S 2 O 3 ) 2 3− for 20 min, the concentration of Cu(NH 3 ) 4 2+ in the solution changed from 5 mmol/L to 0.88 mmol/L. Under these conditions, gold ions were recovered, and the consumption of copper powder was reduced by 60%. Scanning electron microscopy and X-ray photoelectron spectroscopy characterization showed that under a applied reduction potential, the gold content on the surface of the copper powder was higher, and the Cu(II) content in the surface copper species was lower than that achieved in the direct cementation of copper powder. After cementation was completed, stirring the residual solution for 20 min restored the concentration of Cu(NH 3 ) 4 2+ to 4.963 mmol/L. At this point, the leaching rate of gold ore into the solution reached 89% of the first leaching, which maximized the circulation of the solution. Graphical abstract Download : Download high-res image (93KB) Download : Download full-size image

Method for improving adsorption capacity of gold(I) thiosulfate complex on mercapto-functionalized silica gel by masking copper with ethylenediamine

Interfacial properties of mercaptopropyl-functionalised silica gel and its adsorption performance in the recovery of gold(I) thiosulfate complex

Study on Synergistic Strengthening of Gold Extraction with Copper Ethylenediamine Thiosulfate Using Pyrite and Nickel Ions

Aliquat-336 impregnated chitosan microspheres for Au(I) extraction from thiosulfate solution: Preparation, adsorption mechanism, and application

Effectively adsorb Au(S2O3)23− using aminoguanidine as trapping group from thiosulfate solutions

Synthesis of azole-functionalized microspheres and their adsorption properties for gold(I) thiosulfate complex

Efficient and stable leaching of gold in a novel ethydiaminedhephen acetic-thiosulfate system

Thiocyanate Facilitating Thiosulfate Extraction of Gold Via Inhibiting Formation of Passive Layer

Synergistical Thiourea and Thiosulfate Leaching Gold from a Gold Concentrate Calcine with Copper-Ammonia Catalysis

Improving the cementation effect of copper on gold in thiosulfate solution by pre-regulating the existing form of Cu 2+

Electrochemical analysis of copper-EDTA-ammonia-gold thiosulfate dissolution system

Facile synthesis of thiolated silica-encapsulated magnetic adsorbents: Effective adsorption and rapid separation of Au(I) from thiosulfate solution

Highly Efficient Recovery of Au(I) from Gold Leaching Solution Using Sodium Dimethyldithiocarbamate

Enhanced copper cyanide complex precipitation using polymer-surfactant aggregates

Highly effective and selective adsorption of Au(III) from aqueous solution by poly(ethylene sulfide) functionalized chitosan: Kinetics, isothermal adsorption and thermodynamics

Effective removal of aqueous silver by a layered copper thioantimonate

Morphology Modulation of Cu2S Nanoparticles for Cleaner Au (III) Recovery from Aqueous Media: Excellent Capacity, Illustrious Selectivity

Morphology modulation of Cu 2 S nanoparticles for cleaner Au (III) recovery from aqueous media: excellent capacity, illustrious selectivity

Development of Stable, Efficient, and Recyclable Amine-Containing Microspheres for Gold(I) Thiosulfate Complex Recovery

Leaching of Gold with Copper–Tartrate–Thiosulfate Solutions

Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheres.