Abstract:Efficient removal of heavy metals complexed with organic ligands from water is still an important but challenging task now. Herein, a novel combined process, i.e., Fe(III)-displacement/UV degradation/alkaline precipitation (abbreviated as Fe(III)/UV/OH) was developed to remove copper organic complexes from synthetic solution and real electroplating effluent, and other processes including alkaline precipitation, Fe(III)/OH, UV/OH were employed for comparison. By using the Fe(III)/UV/OH process, some typical Cu(II) complexes, such as Cu(II) ethylenediaminetetraacetic acid (EDTA), Cu(II) nitrilotriacetic acid (NTA), Cu(II) citrate, Cu(II) tartrate, and Cu(II) sorbate, each at 19.2 mg Cu/L initially, were efficiently removed from synthetic solution with the residual Cu below 1 mg/L. Simultaneously, 30-48% of total organic carbon was eliminated with exception of Cu(II) sorbate. Comparatively, the efficiency of other processes was much lower than the Fe(III)/UV/OH process. With Cu(II) citrate as the model complex, the optimal conditions for the combined process were obtained as: initial pH for Fe(III) displacement, 1.8-5.4; molar ratio of [Fe]/[Cu], 4:1; UV irradiation, 10 min; precipitation pH, 6.6 -13. The mechanism responsible for the process involved the liberation of Cu(II) ions from organic complexes as a result of Fe(III) displacement, decarboxylation of Fe(III)-ligand complexes subjected to UV irradiation, and final coprecipitation of Cu(II) and Fe(II)/Fe(III) ions. Up to 338.1 mg/L of Cu(II) in the electroplating effluent could be efficiently removed by the process with the residual Cu(II) below 1 mg/L and the removal efficiency of similar to 99.8%, whereas direct precipitation by using NaOH could only result in total Cu(II) removal of similar to 8.6%. In addition, sunlight could take the place of UV to achieve similar removal efficiency with longer irradiation time (90 min). (C) 2015 Elsevier Ltd. All rights reserved.

Enhanced copper cyanide complex precipitation using polymer-surfactant aggregates

Highly Efficient Removal of Cu(ii) by Novel Dendritic Polyamine–pyridine-Grafted Chitosan Beads from Complicated Salty and Acidic Wastewaters

Citric Acid Enhanced Copper Removal by a Novel Multi-amines Decorated Resin

Cationic Surfactant-Mediated Coagulation for Enhanced Removal of Toxic Metal-Organic Complexes: Performance, Mechanism, and Validation

Zinc cyanide removal by precipitation with quaternary ammonium salts

Effective Treatment of Cadmium–cyanide Complex by a Reagent with Combined Function of Oxidation and Coagulation

Reagent Elution Combined with Positive Pressure Filtration: A Zero-Discharge Method for Cyanide Tailings Remediation

Enhanced Copper Pyrophosphate Complex Removal from High Salty Wastewater by Using Nanoconfined Ti-Zr Binary Metallic Oxides: Multivariate Complexation Mechanism

Enhancing Destruction of Copper (I) Cyanide and Subsequent Recovery of Cu(I) by a Novel Electrochemical System Combining Activated Carbon Fiber and Stainless Steel Cathodes

Amidoxime-functionalized polyacrylamide-modified chitosan containing imidazoline groups for effective removal of Cu2+ and Ni2+

A New Combined Process for Efficient Removal of Cu(II) Organic Complexes from Wastewater: Fe(III) Displacement/uv Degradation/alkaline Precipitation

Efficiency and Mechanism of Modified Carbon Nitride for the Co-Adsorption of Copper and Tetracycline from Water

Method for improving adsorption capacity of gold(I) thiosulfate complex on mercapto-functionalized silica gel by masking copper with ethylenediamine

Decomplexation of Cu(II)-EDTA by Synergistic Activation of Persulfate with Alkali and CuO: Kinetics and Activation Mechanism.

Spherical Polystyrene-Supported Chitosan Thin Film of Fast Kinetics and High Capacity for Copper Removal

Recycling Cu(II) from complexing copper wastewater using ferrous sulfide stabilized by carboxymethyl cellulose: efficiency and mechanism insights

Eco-Friendly Carbon Nanotubes Reinforced with Sodium Alginate/Polyacrylic Acid for Enhanced Adsorption of Copper Ions: Kinetics, Isotherm, and Mechanism Adsorption Studies

Synchronous Cyanide Purification with Metals Removal in the Co-Treatment of Zn–CN and Ni Electroplating Wastewaters Via the Ni2+-assisted Precipitation of LDH

Novel approach for removing iron-cyanide complex ions and cesium ions from solutions using hydrogel-like beads

Aliquat-336 impregnated chitosan microspheres for Au(I) extraction from thiosulfate solution: Preparation, adsorption mechanism, and application

Synergic removal and sequential recovery of acid black 1 and copper (II) with hyper-crosslinked resin and inside mechanisms