Abstract:This article presents a semi-analytical model of spiral-groove face seals. Based on Muijderman's spiral-groove bearing theory for parallel faces, a one-dimensional radial discretization method is proposed to process the radial variations of different parameters of face seals. For each discrete element, the geometric parameters of the faces (e.g., film thickness, groove shape) and the physical parameters of the lubricant (e.g., density, viscosity) can be assigned to reflect the radial nonuniformity of these parameters. Furthermore, a correction of the end effect is introduced to improve the model's precision. Errors in this model under various operating conditions and with different design parameters are analyzed by comparison with the traditional one-dimensional difference model and the two-dimensional numerical model. The calculation results indicate that the proposed model is more accurate than the traditional one-dimensional difference model under various conditions. Furthermore, it is shown that the proposed model could be applied to the analysis and design of face seals with different types of grooves and lubricants as well as different radial nonuniformities in their geometric and physical parameters. These extended applications of the proposed model could provide good approximations to the two-dimensional numerical results. This semi-analytical model has the benefits of an analytical method (e.g., simple preprocessing, high efficiency, and the ability to manage large-scale parameter optimization) and of a numerical method (e.g., the ability to be applied to extended applications of face seals with shallow grooves).

Author Response for "numerical Model of Two-Phase Mechanical Face Seal with Shallow Grooves Based on Finite Volume Method"

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Numerical Investigation on Immiscible Two-Phase Flow in the Mechanical Seal Gap

Investigation of Two-Phase Change Flow in Mechanical Seal with Complex Solid Surfaces

A Homogeneous Phase Change Model for Two-Phase Mechanical Seals with Three-Dimensional Face Structures

Numerical Modeling of Dynamic Sealing Behaviors of Spiral Groove Gas Face Seals

Numerical Study of the Fluid Forces for a Whirling Annular Seal: CFD Simulation Versus Experiment

A Semi-Analytical Model of Spiral-Groove Face Seals: Correction and Extension

Thermal Fluid-Solid Interaction Model and Experimental Validation for Hydrostatic Mechanical Face Seals

Theoretical and experimental approach for the characteristics of water-lubricated, high-speed double spiral-groove face seals

A Model of Contact Deep Groove Seals Based on Partition Model and JFO Boundary Condition

Numerical and Experimental Study on Waviness Mechanical Seal of Reactor Coolant Pump

Semi-analytical Fluid-solid Coupling Model for Hydrostatic Mechanical Seals

Three-Dimensional Coupling Analysis of Flow and Thermal Performance of A Mechanical Seal

FULL NUMERICAL SIMULATION TO THE PERFORMANCE OF MICRO-TEXTURED MECHANICAL FACE SEALS

Theoretical Analysis on Fluid-Structure Coupling of Hydrostatic Mechanical Seal

Coupling Analysis of Frictional Heat of Fluid Film and Thermal Deformation of Mechanical Seal End Faces

Numerical Analysis of a Nonlinear Double Disc Rotor-Seal System

Author Response for "study on the Influence of Non-Gaussian Honing Surface on Contact and Flow Characteristics"

Numerical Analysis of Heat Transfer Coefficient in Mechanical Face Seals

A Finite Element Cavitation Algorithm Using Free Mesh for Mechanical Face Seal