Abstract:Engineering practice has demonstrated that seal failure can result in severe leakage and wear, reducing the efficiency of hydraulic systems and even leading to major safety risks. Currently, analyses of the thermal aspect of seal interfaces are relatively limited, with most studies focusing on mechanical analysis. However, in actual applications, temperature has a significant impact on sealing performance. In this paper, nonlinear elastomechanics, viscous fluid mechanics, micro-contact mechanics, micro-deformation theory, and thermodynamics are coupled to establish a mixed lubrication model considering the thermal effect. The reliability of the mixed lubrication model is verified through experiments, and the temperature distribution of the oil film in the sealing area and the temperature distribution of the seal ring are simulated. Finally, the effects of the reciprocating speed, root mean square roughness, fluid medium pressure, and seal pre-compression on seal friction force and leakage are investigated. The results show that the heat generated in the sealing area accumulates at the bottom of the V-ring. Under the same conditions, compared with the instroke, the temperature-rise area of the outstroke is biased to the left and the increase in temperature is greater. In addition, the piston rod speed and the preliminary compression of the seal ring have a greater impact on the overall seal friction force and leakage. Under a lower seal pre-compression, the RMS roughness has a great influence on the leakage and friction in the outstroke, while the impact of the internal stroke is limited.

Reliability Evaluation of a Dynamic-Pressure Mechanical Seal Based on Liquid Film Vaporization Phase Transition

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Research on Diagnosis Method of Heavy-Pressure and High-Speed Dynamic Sealing Fault Based on Layer Support Vector Machine

Transient Response and Rub-Impact Phenomenon of Liquid Lubricated Non-Contacting Mechanical Seals During External Pressure Fluctuation

Numerical Investigation on Immiscible Two-Phase Flow in the Mechanical Seal Gap

Multi-Physical Field, Coupled, Mixed Lubrication Analysis of Hydraulic Reciprocating Vacuum Lip Seal

Theoretical and experimental approach for the characteristics of water-lubricated, high-speed double spiral-groove face seals

Dynamic failure analysis of static seals under pressure fluctuation in an ultrahigh-pressure water piston pump

Research and Progress of Mechanical Seals Operating with Vaporization Transition

Static and Dynamic Characteristics of Hydrodynamic Mechanical Seal

Evaluation of Mechanical Face Seals Operating with Hydrocarbon Mixtures

A Numerical Study on Mechanical Seal Dynamic Characteristics Within a Reactor Coolant Pump

Influence of squeezing behavior on cavitation characteristics and performance parameters of mechanical seals with an efficient mass-conserving algorithm

Study on working mechanism and performance of deep groove seal at high temperature and high speed in mixed lubrication

Investigation of Two-Phase Change Flow in Mechanical Seal with Complex Solid Surfaces

Investigation on the Dynamic Characteristics for High-Speed Mechanical Seal Considering Turbulent Cavitating Flow and Inertia Effect

Thermal Cavitation Effect on the Hydrodynamic Performance of Spiral Groove Liquid Face Seals

Numerical Simulation Model of a Reciprocating Seal Based on the Mixed-Lubrication Theory

Theoretical Analysis on Fluid-Structure Coupling of Hydrostatic Mechanical Seal

Dynamic Performance Analysis of Gas Film Floating Ring Seals Based on the Reynolds–Bernoulli Small-Perturbation Model