Time offset measurement of 100 km long fiber link with dual-comb linear optical sampling

Abulikemu Abuduweili,Xing Chen,Guanyu Liu,Zhigang Zhang

DOI: https://doi.org/10.1117/12.2505963

2018-01-01

Abstract:We demonstrate a time-offset measurement with sub-picosecond resolution over 100 km long fiber using asynchronized dual-comb linear optical sampling.

What problem does this paper attempt to address?

Sub-picosecond Resolution Time-Offset Measurement over Fiber Link with Asynchronous Optical Sampling

Abulikemu Abuduweili,Xing Chen,Jianmin Shang,Wangpeng Zhang,Cheng Ci,Song Yu,Yingxin Zhao,Bo Liu,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2018.sm1l.2

2018-01-01

Abstract:We demonstrate a sub-picosecond resolution time-offset measurement over 100 km long fiber using asynchronized dual-comb linear optical sampling.
Time-offset Measurement with Dual-Comb Linear Optical Sampling and Time Interval Counter

Abulikemu Abuduweili,Xing Chen,Wenbo Ma,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_at.2020.jw2b.33

2020-01-01

Abstract:We demonstrate a sub-picosecond resolution time-offset comparison over 100 km long fiber between using asynchronized dual-comb linear optical sampling and the time interval counter.
Sub-ps Resolution Clock-Offset Measurement over a 114 Km Fiber Link Using Linear Optical Sampling.

Abulikemu Abuduweili,Xing Chen,Ziyang Chen,Fei Meng,Teng Wu,Hong Guo,Zhigang Zhang

DOI: https://doi.org/10.1364/oe.411569

IF: 3.8

2020-01-01

Optics Express

Abstract:We demonstrate a sub-ps resolution clock-offset measurement based on linear optical sampling technique via a 114 km fiber link by transferring a dual optical frequency comb. The time deviation between two distance clocks is 110 fs at 1 s and 22 fs at 100 s averaging, and the standard deviation of the measured clock offset is 237 fs. This sub-ps level of clock offset measurement should benefit many time synchronization applications via long fiber links.
Clock-offset Measurement over a 50 Km Nonreciprocal Fiber Link with Linear Optical Sampling

Zhigang Zhang,Fei Meng,Bo Tang,Yunfeng Wu,Yanrong Song

DOI: https://doi.org/10.1364/opticaopen.27299718

2024-01-01

Abstract:We demonstrated a sub-100 picosecond level transmission stability clock-offset measurement via a 50 km nonreciprocal fiber link with a dual comb LOS technique. This experiment result supports the remote high precision time and frequency transmission and synchronization of two or more combs over practical commercial optical communication system fiber links, which conformed to the DWDM international standards system. To the best of our knowledge, it is the first similar demonstration have been reported.
Sub-100 femtosecond resolution of clock-offset measurement over a 100 km fiber link with dual-comb sampling

Yunfeng Wu,Fei Meng,Yanrong Song,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_at.2022.jw3b.117

2022-01-01

Abstract:We demonstrate a sub-100 femtosecond level resolution clock-offset measurement via a 100 km near-zero dispersion fiber by transferring high coherence optical frequency combs, each phase-locked to the ultra-narrow linewidth lasers.
Two-Way Optical Time and Frequency Transfer over a 20-Km Fiber Link Based on Optical Frequency Combs

Haoyuan Lu,Zhaolong Li,Jiaxin Wang,Hongling Meng,Jianye Zhao

DOI: https://doi.org/10.1109/jphot.2019.2896639

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:Traditional high-precision long-distance time-frequency transmission requires a complex compensation structure and a continuous optical link, which make high-precision transmission difficult. In this study, we use two counter-propagating optical frequency combs to realize high-precision two-way time-frequency transfer over a 20-km fiber link. The transmission distance transmitted in this experiment is also farther greater than the current free-space transmission distances transmitted over free space. The two optical frequency combs are locked to the same radio frequency reference source. The method makes measurements more flexible and reduces interference. To suppress the effect of dispersion, we use an optical filter to narrow the bandwidth of the optical comb. Meanwhile, the bandwidth of the optical filter is chosen to ensure that the optical comb has the best signal-to-noise ratio at a remote site. We measure the timing difference over 24 h between the local site and remote site.
Hundred-Femtosecond-Level Concise Optical Time Delay Measurement System Based on Linear Optical Sampling

Yufei Zhang,Ziyang Chen,Dongrui Yu,Jialin Niu,Xing Chen,Hong Guo

DOI: https://doi.org/10.1063/5.0157499

2023-12-16

Abstract:Fiber-delay measurement is one of the key fundamental technologies in numerous fields. Here we propose and experimentally demonstrate a high-precision and concise optical time delay measurement system based on the technique of linear optical sampling, reaching the precision better than 100 fs under averaging. The use of only two optical frequency combs without locking the carrier-envelope-offset frequency greatly simplifies the structure of the time-delay measurement system. We also experimentally investigate the current limitations on the precision of the system. The timing jitter noises of two sources are mainly non-common mode, and are both restricted to the frequency sources. Our results indicate that the proposed device can measure fiber length fluctuations below 10 $\mu {\rm{m}}$, paving the way for further analyses of the external disturbances on the fiber link.

Optics,Instrumentation and Detectors
Distributed Optical Fiber Sensing Measurement Based on Time Offset

Lu-Jun Cui,Yan-Long Cao,Hong-Hong Guo,Shi-Rui Guo,Bo Zheng,Ji-Hua Yu

DOI: https://doi.org/10.1166/jno.2019.2519

2019-01-01

Journal of Nanoelectronics and Optoelectronics

Abstract:Multi-parameters and multi-region optical fiber measurement is of the utmost importance for structural health monitoring. We propose and demonstrate a distributed optical fiber sensing system based on time offset for many separated regions optical fiber measurements, in order to realize the many separated regions simultaneous measurement, the distributed optical fiber sensing system based on time offset with the partials reflector for wide measurement range was carried out. In this study, we discusses that the max number of detecting regions for the distributed optical fiber sensing system. Furthermore, serials of temperature tests is also conducted in two detecting regions laboratory. The experimental results show that the optical fiber sensor based on time offset exhibited good linear performance with 97% linear coefficient, the experiments demonstrated that the output intensity values increase obviously along with the temperature changes and the sensitivity is almost same for the specific optical fiber detecting length in detecting regions. No only point measurement but also multi-region distributed measurement could monitor by the distributed optical fiber sensing system based on time offset effectively.
13 134-Km Fiber-Optic Time Synchronization

Faxing Zuo,Kunfeng Xie,Liang Hu,Jianping Chen,Guiling Wu

DOI: https://doi.org/10.1109/jlt.2021.3102674

IF: 4.7

2021-01-01

Journal of Lightwave Technology

Abstract:In this paper, we experimentally demonstrate an ultra-long haul and multi-access fiber-optic time synchronization system over the equivalent 13 134 km fiber link based on the bidirectional time division multiplexing transmission over a single fiber with the same wavelength (BTDM-SFSW) scheme. The 13 134 km fiber link is simulated by re-circulating the time signals 33 laps in the 398 km fiber loop. Intermediate stations containing bidirectional optical-electrical-optical repeaters are simultaneously used to implement a high-symmetry low-noise bidirectional signal regeneration for extending transmission distance, and provide the time signals for multi-access time synchronization applications. The results illustrate that time signals aligned with the master station can be available at the slave station and arbitrary intermediate stations without requiring link calibrations. Time synchronization stability in terms of time deviation (TDEV) of less than 32 ps/10 s and the combined uncertainty of less than 89.6 ps can be obtained for the 13 134 km fiber recirculating link. The intermediate stations also have the similar performance with the main fiber link. The simple, robust and accurate ultra-long haul fiber-optic time synchronization technique demonstrated here represents a new class of high-accuracy time synchronization that could be used for national/intercontinental atomic clock comparison campaigns and opens up a possibility for providing synchronized time signals to multiple users over the large-scale fiber-optic networks.
Multichannel precision time delay measurement in optical fibers

Jingwen Dong,Bo Wang,Hongwei Si,Lijun Wang

DOI: https://doi.org/10.1109/FCS.2017.8088811

2017-01-01

Abstract:We report a novel method for multichannel transmission delay measurement in optical fibers. The fiber transfer delay measurement is converted into frequency measurement. As a key technique, a simple ambiguity resolving process based on phase discrimination and frequency locking is used to overcome the contradiction between measurement accuracy and system complexity. A real-time calibration method is employed to detect and eliminate system delay fluctuation. It achieves two-channel fiber transmission delay measurement with a high accuracy of 0.1 picosecond and dynamic range over tens of kilometers.
High precise time delay measurement in optical fiber

Dong,Jingwen,Wang,Bo,Si,Hongwei,Wang,Lijun

DOI: https://doi.org/10.1007/978-981-10-4594-3_46

2017-01-01

Abstract:Due to its properties of low attenuation, high capacity and reliability, the widespread optical fiber network has become an attractive option for long-distance transmission. The signal transmission delay in fiber, as an essential characteristic, becomes a significant parameter that has broad effects on the performance of optical communications, fiber timing distribution systems, phased array antennas, and some other large-scale scientific or engineering facilities. We report a novel method for signal transmission delay measurement in optical fibers. Based on phase discrimination, dual-frequency locking and measurement, it achieves a very high measurement precision of 0.2 ps with a 0.1 ps resolution, and dynamic range over 50 km. Using a phase shift and frequency locking technique, the measurement ambiguity can be resolved within only a few seconds. It greatly simplifies the measurement procedure and requires much simpler equipment. A good agreement in measurement results with the conventional pulsed method is obtained as well.
Method of Fiber Transfer Delay Measurement Based on Phase Quantization and Delay Synthesis

Donglin Qin,Xiaofeng Jin,Xianbin Yu,Xiangdong Jin,Shilie Zheng,Xianmin Zhang,Guoyong Wang,Qinggui Tan

DOI: https://doi.org/10.1364/ao.380136

IF: 1.9

2019-01-01

Applied Optics

Abstract:A novel method, to the best of our knowledge, of fiber transfer delay (FTD) measurement based on phase quantization and delay synthesis is proposed and demonstrated. By detecting the differential phase shifts of a set of frequency-multiplied RF signals transmission through the fiber link with and without the FTD under the test, the ${2}\pi $2π phase ambiguity problem can be solved. To avoid the phase quantization error near the digital quantization boundary, a self-check and error-correction method is proposed so as to greatly improve the reliability of measurement. In the experiment, the measurement repeatability around 0.018 ps within a period of 80 s is achieved for a back-to-back fiber link, and a test resolution of 0.03 ps is proved with a motorized tunable delay line. The system is available for measurement of a large FTD range up to 100 µs with no dead zone.
High-Precision and Synchronous Measurement of Fiber Length and Dispersion Using Optical Frequency Comb-Based Time-Delay Dispersion Interferometry

Qihua Liu,Jingsheng Huang,Jindong Wang,Wei Du,Fumin Zhang,Tao Zhu

DOI: https://doi.org/10.1109/tim.2024.3386211

IF: 5.6

2024-04-24

IEEE Transactions on Instrumentation and Measurement

Abstract:Optical fiber is the cornerstone of the contemporary inter-network and has produced profound and far-reaching effect on modern information society ever since it was invented. The detection of key parameters of optical fiber such as length, refractive index, and chromatic dispersion is of great significance to ensure the quality and security of communication network. Here, a synchronous, fast, and high-precision measurement method for the length and dispersion of optical fibers is proposed, where the time-of-flight measurement and spectral interference are organically combined using an optical frequency comb (OFC) with the assistance of a modulated narrow linewidth single-frequency laser. The length and the dispersion coefficient distribution can be preciously obtained directly and simultaneously by measuring only single-frame interference spectrum. The excellent time–frequency characteristics of the OFC and our unique algorithm enable the realization of extremely high measurement accuracy and resolution: a resolution of @ 500 m and an accuracy of 1.5 cm ( relatively) @ 11 000 m, as well as a dispersion measurement accuracy of 0.5%. The method boasts rapid measurement, ample bandwidth, elimination of scanning, and exceptional precision, making it highly applicable in both optical communication and optical fiber sensing systems.

engineering, electrical & electronic,instruments & instrumentation
High-Precision Time Transfer over 2000-Km Fiber Link

Hao Zhang,Guiling Wu,Liang Hu,Xinwan Li,Jianping Chen

DOI: https://doi.org/10.1109/jphot.2015.2499541

IF: 2.4

2015-01-01

IEEE Photonics Journal

Abstract:The two-way fiber-optic time transfer based on bidirectional time-division multiplexing transmission over a single fiber with the same wavelength (BTDM-SFSW) is an effective way to eliminate the effect of Rayleigh backscattering and reach the maximum bidirectional symmetry at the same time. In this paper, a BTDM-SFSW-based time transfer testbed is built with the employment of loop configuration in the laboratory to evaluate the performance of fiber-optic time transfer over thousands of kilometers, which is confronted with worse signal-to-noise ratio (SNR), more serious fiber dispersion, and so on. The contributions of different factors, including the precision and stability of transmitted wavelengths, the power dependence of transceivers' receiving delays, Sagnac effect, etc., to the uncertainty of time transfer are investigated by theoretical analyses and experimental measurements. A full uncertainty budget for the BTDM-SFSW-based time transfer is provided. Experimental results show that the stabilities of less than 89 ps/s and 23 ps/10(5) s can be achieved for the time transfer over a 2000-km fiber link. The theoretical expanded uncertainty with the coverage factor k = 2 can be less than 100 ps without the requirement of a fiber link calibration, which is validated by experimental results as well.
High-Precision Ultralong Distance Time Transfer Using Single-Fiber Bidirectional-Transmission Unidirectional Optical Amplifiers

Hao Zhang,Guiling Wu,Hongwei Li,Xinwan Li,Jianping Chen

DOI: https://doi.org/10.1109/jphot.2016.2608620

IF: 2.4

2016-01-01

IEEE Photonics Journal

Abstract:This paper demonstrates a fiber-optic time transfer over a 6000 km noncalibrated fiber link using proposed single-fiber bidirectional-transmission unidirectional optical amplifiers (SFBT-UOAs). The proposed SFBT-UOA employs a 2 × 2 optical switch to enable the time-division-multiplexed time signals for both directions to pass through the same UOA in different time slots. The bidirectional delay symmetry is guaranteed to the maximum extent by allowing the time signals to be transmitted back and forth using the same wavelength over a single fiber. Meanwhile, the noises suffered in the systems employing single fiber bidirectional optical amplifiers (SF-BOAs), such as double Rayleigh backscattering, are effectively suppressed. Consequently, high-precision fiber-optic time transfer can be implemented over ultralong distance by adopting the proposed SFBT-UOAs. Moreover, the SFBT-UOA can support the conventional network services via wavelength division multiplexings (WDMs) and, therefore, offers the potential to perform high-precision time transfer over long-haul commercial fiber links. Over 6000 km, the measured time deviations of fiber-optic time transfer in the laboratory are less than 190 ps/s and 61 ps/105 s, respectively. The calculated combined uncertainty is not beyond 70 ps, which agrees well with the experimental verification over the noncalibrated fiber link.
Fiber-optic Time Transfer Based on Bidirectional FDM and Cross-Correlation Processing

Kunfeng Xie,Xiaoming Zhang,Liang Hu,Jianping Chen,Guiling Wu

DOI: https://doi.org/10.1109/tim.2024.3488142

IF: 5.6

2024-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:In this paper, we proposed a high-precision fiber-optic time transfer scheme based on bidirectional frequency division multiplexing and cross-correlation processing. Time signals at different stations are encoded as different time varying signals within different frequency passband, respectively. The transferred time varying signals are carried on the same wavelengths and transmitted to each other, which are precisely recovered at the receiving stations. The time differences between the received time varying signals and the one generated according to the local time signals are measured by cross correlation processing. Since the transferred time varying signals are non-overlapping on spectrum, back-scattering noises from fiber links can be effectively suppressed by simply electrical filtering. At the same time, the symmetry of bidirectional transmission can be guaranteed maximally to avoid the time-consuming and laborious link calibration, and support fiber link switching without requiring link re-calibration. The proposed scheme is experimentally demonstrated over 50 km, 100 km, 150 km fiber-links, respectively. The results show that the measured mean clock difference can be less than 3.55 ps over fibers with different lengths, and the stability in terms of time deviation can be less than 34.46 ps at 1 s and 1.26 ps at 1000 s over 150 km fiber-link, respectively.
Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

Xing Chen,Jinlong Lu,Yifan Cui,Jian Zhang,Xing Lu,Xusheng Tian,Cheng Ci,Bo Liu,Hong Wu,Tingsong Tang,Kebin Shi,Zhigang Zhang

DOI: https://doi.org/10.1038/srep18343

IF: 4.6

2015-01-01

Scientific Reports

Abstract:Precision time synchronization between two remote sites is desired in many applications such as global positioning satellite systems, long-baseline interferometry, coherent radar detection and fundamental physics constant measurements. The recently developed frequency dissemination technologies based on optical fiber link have improved the transfer instability to the level of 10−19/day at remote location. Therefore it is possible to keep clock oscillation at remote locations continuously corrected, or to reproduce a “virtual” clock on the remote location. However the initial alignment and the correction of 1 pps timing signal from time to time are still required, besides the highly stabilized clock frequency transfer between distant locations. Here we demonstrate a time synchronization based on an ultra-stable frequency transfer system via 120-km commercial fiber link by transferring an optical frequency comb. Both the phase noise compensation in frequency dissemination and temporal basis alignment in time synchronization were implemented by a feed-forward digital compensation (FFDC) technique. The fractional frequency instability was measured to be 6.18 × 10−20 at 2000 s. The timing deviation of time synchronization was measured to be 0.6 ps in 1500 s. This technique also can be applied in multi-node fiber network topology.
Time Transfer Through Optical Fiber over 166km on Two Telecommunication Network Fibers

Xinxing Guo,Bo Liu,Jiang Chen,Shaoshao Yu,Yucan Zhang,Tao Liu,Ruifang Dong,Shougang Zhang

DOI: https://doi.org/10.1109/eftf61992.2024.10722574

2024-01-01

Abstract:This article achieves a comparison of optical fiber time transfer systems on different optical fibers on the same route over a 166km long onsite fiber optic link. This article provides new ideas and methods for high-precision fiber optic time transfer comparison and indicator verification. When conducting time transfer with different wavelengths on the two telecommunication network fibers, the system adopts a bidirectional time comparison method. It needs to consider factors such as dispersion to further eliminate uncertainty in the fiber optic transmission process, to achieve extremely high precision time synchronization and clock source comparison. This article uses 8 optical fiber time transfer devices, starting from the National Time Service Center in Lintong, on two different optical fibers on the same path, passing through Xi'an and Xianyang to reach Tongchuan City. And the fiber dispersion self-correction scheme is used in the system. The experimental measurement results show that the fluctuation is 24 ps in standard deviation. The peak-to-peak value of fluctuation is 69 ps, and the transfer stability TDEV is 7 ps@ls.
A 300-Kilometer Optical Fiber Time Transfer Using Bidirectional Tdm Dissemination

Liang Hu,Guiling Wu,Hao Zhang,Jianping Chen

2014-01-01

Abstract:We propose a long-distance high precise time transfer scheme over single optical fiber employing the same wavelengths in both directions. It can suppress the impact of the Rayleigh backscattering and the dispersion-induced symmetric deviation over fiber links at the same time by using bidirectional time division multiplexing (BTDM) mechanism. A single-fiber bidirectional amplifier (SFBA) is also optimized for the proposed scheme. A 300km time transfer over single optical fiber with identical optical wavelengths in both directions is demonstrated. The results show that the bidirectional propagation delay asymmetry is less than 25 ps with fiber link up to 300km without any calibration, which is closed to the floor of the used time interval counters, and almost keep unchanged as the fiber length increases. The measured stabilities in term of TDEV are less than 40ps/s and 11ps/d, respectively.
Rangeability extension of fiber-optic low-coherence measurement based on cascaded multistage fiber delay line.

Shuguang Li,Xinwan Li,Weiwen Zou,Jianping Chen

DOI: https://doi.org/10.1364/AO.51.000771

IF: 1.9

2012-01-01

Applied Optics

Abstract:We demonstrate a simple method to extend the measurable fiber length with a fiber-optic low-coherence technique. This method is based on a cascaded structure of multistage fiber delay line laid in one arm of the low-coherence technique. By choosing different individual stages in the cascaded fiber delay line, the length of the fiber under test can be continuously measured with a different measurement range. The measurement range of 0.81 km and spatial resolution of 60 μm are successfully realized.

Time offset measurement of 100 km long fiber link with dual-comb linear optical sampling

Sub-picosecond Resolution Time-Offset Measurement over Fiber Link with Asynchronous Optical Sampling

Time-offset Measurement with Dual-Comb Linear Optical Sampling and Time Interval Counter

Sub-ps Resolution Clock-Offset Measurement over a 114 Km Fiber Link Using Linear Optical Sampling.

Clock-offset Measurement over a 50 Km Nonreciprocal Fiber Link with Linear Optical Sampling

Sub-100 femtosecond resolution of clock-offset measurement over a 100 km fiber link with dual-comb sampling

Two-Way Optical Time and Frequency Transfer over a 20-Km Fiber Link Based on Optical Frequency Combs

Hundred-Femtosecond-Level Concise Optical Time Delay Measurement System Based on Linear Optical Sampling

Distributed Optical Fiber Sensing Measurement Based on Time Offset

13 134-Km Fiber-Optic Time Synchronization

Multichannel precision time delay measurement in optical fibers

High precise time delay measurement in optical fiber

Method of Fiber Transfer Delay Measurement Based on Phase Quantization and Delay Synthesis

High-Precision and Synchronous Measurement of Fiber Length and Dispersion Using Optical Frequency Comb-Based Time-Delay Dispersion Interferometry

High-Precision Time Transfer over 2000-Km Fiber Link

High-Precision Ultralong Distance Time Transfer Using Single-Fiber Bidirectional-Transmission Unidirectional Optical Amplifiers

Fiber-optic Time Transfer Based on Bidirectional FDM and Cross-Correlation Processing

Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

Time Transfer Through Optical Fiber over 166km on Two Telecommunication Network Fibers

A 300-Kilometer Optical Fiber Time Transfer Using Bidirectional Tdm Dissemination

Rangeability extension of fiber-optic low-coherence measurement based on cascaded multistage fiber delay line.