Time-offset Measurement with Dual-Comb Linear Optical Sampling and Time Interval Counter

Abulikemu Abuduweili,Xing Chen,Wenbo Ma,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_at.2020.jw2b.33

2020-01-01

Abstract:We demonstrate a sub-picosecond resolution time-offset comparison over 100 km long fiber between using asynchronized dual-comb linear optical sampling and the time interval counter.

What problem does this paper attempt to address?

Time offset measurement of 100 km long fiber link with dual-comb linear optical sampling

Abulikemu Abuduweili,Xing Chen,Guanyu Liu,Zhigang Zhang

DOI: https://doi.org/10.1117/12.2505963

2018-01-01

Abstract:We demonstrate a time-offset measurement with sub-picosecond resolution over 100 km long fiber using asynchronized dual-comb linear optical sampling.
Sub-picosecond Resolution Time-Offset Measurement over Fiber Link with Asynchronous Optical Sampling

Abulikemu Abuduweili,Xing Chen,Jianmin Shang,Wangpeng Zhang,Cheng Ci,Song Yu,Yingxin Zhao,Bo Liu,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_si.2018.sm1l.2

2018-01-01

Abstract:We demonstrate a sub-picosecond resolution time-offset measurement over 100 km long fiber using asynchronized dual-comb linear optical sampling.
Sub-ps Resolution Clock-Offset Measurement over a 114 Km Fiber Link Using Linear Optical Sampling.

Abulikemu Abuduweili,Xing Chen,Ziyang Chen,Fei Meng,Teng Wu,Hong Guo,Zhigang Zhang

DOI: https://doi.org/10.1364/oe.411569

IF: 3.8

2020-01-01

Optics Express

Abstract:We demonstrate a sub-ps resolution clock-offset measurement based on linear optical sampling technique via a 114 km fiber link by transferring a dual optical frequency comb. The time deviation between two distance clocks is 110 fs at 1 s and 22 fs at 100 s averaging, and the standard deviation of the measured clock offset is 237 fs. This sub-ps level of clock offset measurement should benefit many time synchronization applications via long fiber links.
Clock-offset Measurement over a 50 Km Nonreciprocal Fiber Link with Linear Optical Sampling

Zhigang Zhang,Fei Meng,Bo Tang,Yunfeng Wu,Yanrong Song

DOI: https://doi.org/10.1364/opticaopen.27299718

2024-01-01

Abstract:We demonstrated a sub-100 picosecond level transmission stability clock-offset measurement via a 50 km nonreciprocal fiber link with a dual comb LOS technique. This experiment result supports the remote high precision time and frequency transmission and synchronization of two or more combs over practical commercial optical communication system fiber links, which conformed to the DWDM international standards system. To the best of our knowledge, it is the first similar demonstration have been reported.
Sub-100 femtosecond resolution of clock-offset measurement over a 100 km fiber link with dual-comb sampling

Yunfeng Wu,Fei Meng,Yanrong Song,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_at.2022.jw3b.117

2022-01-01

Abstract:We demonstrate a sub-100 femtosecond level resolution clock-offset measurement via a 100 km near-zero dispersion fiber by transferring high coherence optical frequency combs, each phase-locked to the ultra-narrow linewidth lasers.
Hundred-Femtosecond-Level Concise Optical Time Delay Measurement System Based on Linear Optical Sampling

Yufei Zhang,Ziyang Chen,Dongrui Yu,Jialin Niu,Xing Chen,Hong Guo

DOI: https://doi.org/10.1063/5.0157499

2023-12-16

Abstract:Fiber-delay measurement is one of the key fundamental technologies in numerous fields. Here we propose and experimentally demonstrate a high-precision and concise optical time delay measurement system based on the technique of linear optical sampling, reaching the precision better than 100 fs under averaging. The use of only two optical frequency combs without locking the carrier-envelope-offset frequency greatly simplifies the structure of the time-delay measurement system. We also experimentally investigate the current limitations on the precision of the system. The timing jitter noises of two sources are mainly non-common mode, and are both restricted to the frequency sources. Our results indicate that the proposed device can measure fiber length fluctuations below 10 $\mu {\rm{m}}$, paving the way for further analyses of the external disturbances on the fiber link.

Optics,Instrumentation and Detectors
Absolute Distance Measurement by Dual-Comb Nonlinear Asynchronous Optical Sampling.

Hongyuan Zhang,Haoyun Wei,Xuejian Wu,Honglei Yang,Yan Li

DOI: https://doi.org/10.1364/oe.22.006597

IF: 3.8

2014-01-01

Optics Express

Abstract:A dual-comb nonlinear asynchronous optical sampling method is proposed to simplify determination of the time interval and extend the non-ambiguity range in absolute length measurements. Type II second harmonic generation facilitates curve fitting in determining the time interval between adjacent pulses. Meanwhile, the non-ambiguity range is extended by adjusting the repetition rate of the signal laser. The performance of the proposed method is compared with a heterodyne interferometer. Results show that the system achieves a maximum residual of 100.6 nm and an uncertainty of 1.48 μm in a 0.5 ms acquisition time. With longer acquisition time, the uncertainty can be reduced to 166.6 nm for 50 ms and 82.9 nm for 500 ms. Moreover, the extension of the non-ambiguity range is demonstrated by measuring an absolute distance beyond the inherent range determined by the fixed repetition rate.
Two-Way Optical Time and Frequency Transfer over a 20-Km Fiber Link Based on Optical Frequency Combs

Haoyuan Lu,Zhaolong Li,Jiaxin Wang,Hongling Meng,Jianye Zhao

DOI: https://doi.org/10.1109/jphot.2019.2896639

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:Traditional high-precision long-distance time-frequency transmission requires a complex compensation structure and a continuous optical link, which make high-precision transmission difficult. In this study, we use two counter-propagating optical frequency combs to realize high-precision two-way time-frequency transfer over a 20-km fiber link. The transmission distance transmitted in this experiment is also farther greater than the current free-space transmission distances transmitted over free space. The two optical frequency combs are locked to the same radio frequency reference source. The method makes measurements more flexible and reduces interference. To suppress the effect of dispersion, we use an optical filter to narrow the bandwidth of the optical comb. Meanwhile, the bandwidth of the optical filter is chosen to ensure that the optical comb has the best signal-to-noise ratio at a remote site. We measure the timing difference over 24 h between the local site and remote site.
Multichannel precision time delay measurement in optical fibers

Jingwen Dong,Bo Wang,Hongwei Si,Lijun Wang

DOI: https://doi.org/10.1109/FCS.2017.8088811

2017-01-01

Abstract:We report a novel method for multichannel transmission delay measurement in optical fibers. The fiber transfer delay measurement is converted into frequency measurement. As a key technique, a simple ambiguity resolving process based on phase discrimination and frequency locking is used to overcome the contradiction between measurement accuracy and system complexity. A real-time calibration method is employed to detect and eliminate system delay fluctuation. It achieves two-channel fiber transmission delay measurement with a high accuracy of 0.1 picosecond and dynamic range over tens of kilometers.
Distributed Optical Fiber Sensing Measurement Based on Time Offset

Lu-Jun Cui,Yan-Long Cao,Hong-Hong Guo,Shi-Rui Guo,Bo Zheng,Ji-Hua Yu

DOI: https://doi.org/10.1166/jno.2019.2519

2019-01-01

Journal of Nanoelectronics and Optoelectronics

Abstract:Multi-parameters and multi-region optical fiber measurement is of the utmost importance for structural health monitoring. We propose and demonstrate a distributed optical fiber sensing system based on time offset for many separated regions optical fiber measurements, in order to realize the many separated regions simultaneous measurement, the distributed optical fiber sensing system based on time offset with the partials reflector for wide measurement range was carried out. In this study, we discusses that the max number of detecting regions for the distributed optical fiber sensing system. Furthermore, serials of temperature tests is also conducted in two detecting regions laboratory. The experimental results show that the optical fiber sensor based on time offset exhibited good linear performance with 97% linear coefficient, the experiments demonstrated that the output intensity values increase obviously along with the temperature changes and the sensitivity is almost same for the specific optical fiber detecting length in detecting regions. No only point measurement but also multi-region distributed measurement could monitor by the distributed optical fiber sensing system based on time offset effectively.
Ultrafast and High-Precision Time Delay Measurement Based on Complementary Frequency-Swept Light and Frequency-Shifted Dechirping

Yaowen Zhang,Zhen Zeng,Lingjie Zhang,Xinhai Zou,Fan Yang,Zhiyao Zhang,Shangjian Zhang,Heping Li,Yong Liu

DOI: https://doi.org/10.1109/jlt.2023.3334033

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:An approach to measuring time delay with high speed and high precision is proposed based on using complementary frequency-swept light and frequency-shifted dechirping. The complementary frequency-swept light is generated by up-converting a linear frequency-modulated waveform into the optical domain, which sweeps linearly and fast. The frequency-shifted dechirping operation and a phase-noise-elimination algorithm are utilized to suppress the phase noise of the optical source, which enables high-precision time delay measurement without limitation of the coherence time on the measurement range. In the experiment, the bandwidth of the linear frequency-modulated waveform is set to be 4 GHz. The time delay of a spool of single-mode fiber with a length of 1 km is measured by using two different laser sources with linewidths of 1.9 MHz and 27 kHz. The standard deviations of the measured time delay are 0.42 ps and 0.52 ps, respectively, indicating that the optical phase noise has a negligible impact on the measurement results. Allan deviation is used to calculate the relative measurement errors, which are 1×10 -7 and 4×10 -9 within a measurement duration of 30 μs and 4.53 ms, respectively. Besides, the time delay change of an optical tunable delay line with a tuning step of 4 ps is clearly distinguished. Hence, this scheme can achieve ultrafast and high-precision time delay measurement within a large range.
High precise time delay measurement in optical fiber

Dong,Jingwen,Wang,Bo,Si,Hongwei,Wang,Lijun

DOI: https://doi.org/10.1007/978-981-10-4594-3_46

2017-01-01

Abstract:Due to its properties of low attenuation, high capacity and reliability, the widespread optical fiber network has become an attractive option for long-distance transmission. The signal transmission delay in fiber, as an essential characteristic, becomes a significant parameter that has broad effects on the performance of optical communications, fiber timing distribution systems, phased array antennas, and some other large-scale scientific or engineering facilities. We report a novel method for signal transmission delay measurement in optical fibers. Based on phase discrimination, dual-frequency locking and measurement, it achieves a very high measurement precision of 0.2 ps with a 0.1 ps resolution, and dynamic range over 50 km. Using a phase shift and frequency locking technique, the measurement ambiguity can be resolved within only a few seconds. It greatly simplifies the measurement procedure and requires much simpler equipment. A good agreement in measurement results with the conventional pulsed method is obtained as well.
Time Transfer Through Optical Fiber over 166km on Two Telecommunication Network Fibers

Xinxing Guo,Bo Liu,Jiang Chen,Shaoshao Yu,Yucan Zhang,Tao Liu,Ruifang Dong,Shougang Zhang

DOI: https://doi.org/10.1109/eftf61992.2024.10722574

2024-01-01

Abstract:This article achieves a comparison of optical fiber time transfer systems on different optical fibers on the same route over a 166km long onsite fiber optic link. This article provides new ideas and methods for high-precision fiber optic time transfer comparison and indicator verification. When conducting time transfer with different wavelengths on the two telecommunication network fibers, the system adopts a bidirectional time comparison method. It needs to consider factors such as dispersion to further eliminate uncertainty in the fiber optic transmission process, to achieve extremely high precision time synchronization and clock source comparison. This article uses 8 optical fiber time transfer devices, starting from the National Time Service Center in Lintong, on two different optical fibers on the same path, passing through Xi'an and Xianyang to reach Tongchuan City. And the fiber dispersion self-correction scheme is used in the system. The experimental measurement results show that the fluctuation is 24 ps in standard deviation. The peak-to-peak value of fluctuation is 69 ps, and the transfer stability TDEV is 7 ps@ls.
Method of Fiber Transfer Delay Measurement Based on Phase Quantization and Delay Synthesis

Donglin Qin,Xiaofeng Jin,Xianbin Yu,Xiangdong Jin,Shilie Zheng,Xianmin Zhang,Guoyong Wang,Qinggui Tan

DOI: https://doi.org/10.1364/ao.380136

IF: 1.9

2019-01-01

Applied Optics

Abstract:A novel method, to the best of our knowledge, of fiber transfer delay (FTD) measurement based on phase quantization and delay synthesis is proposed and demonstrated. By detecting the differential phase shifts of a set of frequency-multiplied RF signals transmission through the fiber link with and without the FTD under the test, the ${2}\pi $2π phase ambiguity problem can be solved. To avoid the phase quantization error near the digital quantization boundary, a self-check and error-correction method is proposed so as to greatly improve the reliability of measurement. In the experiment, the measurement repeatability around 0.018 ps within a period of 80 s is achieved for a back-to-back fiber link, and a test resolution of 0.03 ps is proved with a motorized tunable delay line. The system is available for measurement of a large FTD range up to 100 µs with no dead zone.
Time-interval Measurement with Linear Optical Sampling at the Femtosecond Level

Dongrui Yu,Ziyang Chen,Xuan Yang,Yunlong Xu,Ziyi Jin,Panxue Ma,Yufei Zhang,Song Yu,Bin Luo,Hong Guo

DOI: https://doi.org/10.1364/PRJ.498810

2023-12-16

Abstract:High-precision time-interval measurement is a fundamental technique in many advanced applications, including time and distance metrology, particle physics, and ultra-precision machining. However, many of these applications are confined by the imprecise time-interval measurement of electrical signals, restricting the performance of the ultimate system to a few picoseconds, which limits ultra-high-precision applications. Here, we demonstrate an optical means of the time-interval measurement of electrical signals that can successfully achieve femtosecond (fs)-level precision. The setup is established using the optical-frequency-comb (OFC)-based linear optical sampling technique to realize timescale-stretched measurement. We achieve the measurement precision of 82 fs for a single LOS scan measurement and 3.05 fs for the 100-times average with post-processing, which is three orders of magnitude higher than the results of older electrical methods. The high-precision time interval measurement of electrical signals can substantially improve precision measurement technologies.

Optics,Instrumentation and Detectors
Long distance measurement up to 1.2 km by electro-optic dual-comb interferometry

Hanzhong Wu,Tuo Zhao,Zhiyang Wang,Kai Zhang,Bin Xue,Jianshuang Li,Mingzhao He,Xinghua Qu

DOI: https://doi.org/10.1063/1.4999537

IF: 4

2017-12-18

Applied Physics Letters

Abstract:We perform a long distance measurement up to 1.2 km on the outdoor baseline by electro-optic dual-comb interferometry. A frequency comb pair is developed by phase modulating a continuous laser with a narrow linewidth, and the slightly different repetition frequencies are synchronized to the Rb clock via the signal generators. A RF electrical comb can be generated by multi-wavelength heterodyne interferometry, and thus, a series of synthetic wavelengths can be obtained, whose phases can be used to determine the distances. Compared with the reference values, the experimental results show an agreement within 379 μm in the 1180 m range. In the long-time experiments, the Allan deviation can be below 20 μm with an averaging time of 10 s, and can be further improved to be less than 600 nm when the averaging time is above 350 s at 435 m and 1180 m, respectively.

physics, applied
High-Precision and Synchronous Measurement of Fiber Length and Dispersion Using Optical Frequency Comb-Based Time-Delay Dispersion Interferometry

Qihua Liu,Jingsheng Huang,Jindong Wang,Wei Du,Fumin Zhang,Tao Zhu

DOI: https://doi.org/10.1109/tim.2024.3386211

IF: 5.6

2024-04-24

IEEE Transactions on Instrumentation and Measurement

Abstract:Optical fiber is the cornerstone of the contemporary inter-network and has produced profound and far-reaching effect on modern information society ever since it was invented. The detection of key parameters of optical fiber such as length, refractive index, and chromatic dispersion is of great significance to ensure the quality and security of communication network. Here, a synchronous, fast, and high-precision measurement method for the length and dispersion of optical fibers is proposed, where the time-of-flight measurement and spectral interference are organically combined using an optical frequency comb (OFC) with the assistance of a modulated narrow linewidth single-frequency laser. The length and the dispersion coefficient distribution can be preciously obtained directly and simultaneously by measuring only single-frame interference spectrum. The excellent time–frequency characteristics of the OFC and our unique algorithm enable the realization of extremely high measurement accuracy and resolution: a resolution of @ 500 m and an accuracy of 1.5 cm ( relatively) @ 11 000 m, as well as a dispersion measurement accuracy of 0.5%. The method boasts rapid measurement, ample bandwidth, elimination of scanning, and exceptional precision, making it highly applicable in both optical communication and optical fiber sensing systems.

engineering, electrical & electronic,instruments & instrumentation
High-Precision Fiber-Optic Time Transfer System Based on Bidirectional FDM and Correlation Processing

Kunfeng Xie,Liang Hu,Jianping Chen,Guiling Wu

DOI: https://doi.org/10.1109/eftf/ifcs57587.2023.10272141

2023-01-01

Abstract:SummaryWe report on a high-precision fiber-optic time transfer system over single optical fiber utilizing the same wavelength in both directions based on bidirectional frequency division multiplexing and cross correlation processing (BFDM-CR). The probe signals and the backscattering noises are effectively discriminated by electrical bandpass filtering for the non-overlapping spectrum of the bidirectional transmission signals. In this way, the impact of the Rayleigh backscattering and the dispersion-induced symmetric deviation over fiber link can be suppressed at the same time. The time interval of the received signals and the local signals is obtained by cross correlation processing to improve the SNR of the measurement on the time interval. A time transfer system based on BFDM-CR over 50km fiber-link is experimentally demonstrated. The stabilities in terms of time deviation (TDEV) are less than 19.2 ps/s and 2.2 ps/10000s, respectively.
Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

Xing Chen,Jinlong Lu,Yifan Cui,Jian Zhang,Xing Lu,Xusheng Tian,Cheng Ci,Bo Liu,Hong Wu,Tingsong Tang,Kebin Shi,Zhigang Zhang

DOI: https://doi.org/10.1038/srep18343

IF: 4.6

2015-01-01

Scientific Reports

Abstract:Precision time synchronization between two remote sites is desired in many applications such as global positioning satellite systems, long-baseline interferometry, coherent radar detection and fundamental physics constant measurements. The recently developed frequency dissemination technologies based on optical fiber link have improved the transfer instability to the level of 10−19/day at remote location. Therefore it is possible to keep clock oscillation at remote locations continuously corrected, or to reproduce a “virtual” clock on the remote location. However the initial alignment and the correction of 1 pps timing signal from time to time are still required, besides the highly stabilized clock frequency transfer between distant locations. Here we demonstrate a time synchronization based on an ultra-stable frequency transfer system via 120-km commercial fiber link by transferring an optical frequency comb. Both the phase noise compensation in frequency dissemination and temporal basis alignment in time synchronization were implemented by a feed-forward digital compensation (FFDC) technique. The fractional frequency instability was measured to be 6.18 × 10−20 at 2000 s. The timing deviation of time synchronization was measured to be 0.6 ps in 1500 s. This technique also can be applied in multi-node fiber network topology.
A rapid and long-distance ranging system assisted by time-stretch and wavelength division

Liang Xu,Kun Wang,Chen Liu,Wenying Chen,Chi Zhang,Xinliang Zhang

DOI: https://doi.org/10.1109/OECC56963.2023.10209883

2023-01-01

Abstract:We propose and experimentally demonstrate an absolute distance measurement system based on dual-comb. The update rate can be 100 kHz, while the precision is approximately 97 nm with an averaging time of 5 ms. The non-ambiguity range is extended to 1.5 km theoretically.

Time-offset Measurement with Dual-Comb Linear Optical Sampling and Time Interval Counter

Time offset measurement of 100 km long fiber link with dual-comb linear optical sampling

Sub-picosecond Resolution Time-Offset Measurement over Fiber Link with Asynchronous Optical Sampling

Sub-ps Resolution Clock-Offset Measurement over a 114 Km Fiber Link Using Linear Optical Sampling.

Clock-offset Measurement over a 50 Km Nonreciprocal Fiber Link with Linear Optical Sampling

Sub-100 femtosecond resolution of clock-offset measurement over a 100 km fiber link with dual-comb sampling

Hundred-Femtosecond-Level Concise Optical Time Delay Measurement System Based on Linear Optical Sampling

Absolute Distance Measurement by Dual-Comb Nonlinear Asynchronous Optical Sampling.

Two-Way Optical Time and Frequency Transfer over a 20-Km Fiber Link Based on Optical Frequency Combs

Multichannel precision time delay measurement in optical fibers

Distributed Optical Fiber Sensing Measurement Based on Time Offset

Ultrafast and High-Precision Time Delay Measurement Based on Complementary Frequency-Swept Light and Frequency-Shifted Dechirping

High precise time delay measurement in optical fiber

Time Transfer Through Optical Fiber over 166km on Two Telecommunication Network Fibers

Method of Fiber Transfer Delay Measurement Based on Phase Quantization and Delay Synthesis

Time-interval Measurement with Linear Optical Sampling at the Femtosecond Level

Long distance measurement up to 1.2 km by electro-optic dual-comb interferometry

High-Precision and Synchronous Measurement of Fiber Length and Dispersion Using Optical Frequency Comb-Based Time-Delay Dispersion Interferometry

High-Precision Fiber-Optic Time Transfer System Based on Bidirectional FDM and Correlation Processing

Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

A rapid and long-distance ranging system assisted by time-stretch and wavelength division