Abstract:The aim of this article is to investigate the characterizations and formation mechanisms of cold-sprayed coatings using gas-atomized and electrolytic powders. The study highlights the importance of reaching the particles' critical velocity for optimal deposition. The main findings reveal that the morphology and stacking conditions of the coatings have a significant impact on their mechanical properties. Coatings made with gas-atomized powders exhibited noticeable pores and higher plastic deformation, while electrolytic powder coatings had greater density and smoother interfaces with the substrate. Adhesion strength relied on the physical bonding resulting from the plastic deformation energy between the spraying powders and the substrate. Gas-atomized powders showed higher adhesion compared to electrolytic powders, with dendritic powders resulting in lower adhesion due to dispersed impact force. The interaction between thermal and kinetic energy during the cold spraying process facilitated plastic deformation and particle deposition by softening and eroding the substrate surface. Insufficient plastic deformation with dendritic powders led to incomplete overlap, pore formation at the interface, and the persistence of the oxide layer along powder boundaries. Overall, these findings provide valuable insights into the influence of powder properties on coating morphology, adhesion strength, and overall performance, contributing to the understanding and optimization of cold spray processes.

Microstructure and Properties of Ag/SnO2 Coatings Prepared by Cold Spraying

Microstructure and Properties of AgSnO2 Contact Materials Prepared by Cold Spray

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Improving Microstructure and Corrosion Resistance of Cold Spraying Cu Coating Through Annealing

Microstructure and Property of Cold Sprayed Copper Coating

Effect of Interfacial Structure on Microstructure and Properties of Cold-Sprayed Cu-Al2O3 Composite Coating

Microstructure and Properties of Cu–Cr Coatings Deposited by Cold Spraying

Microstructure Evolution of Cold-Sprayed Coating During Deposition and Through Post-Spraying Heat Treatment

The effect of annealing on trapped copper oxides in particle-particle interfaces of cold-sprayed Cu coatings

Effect of Annealing on the Microstructure and Erosion Performance of Cold-Sprayed FeAl Intermetallic Coatings

Influence Of Annealing Temperature On Film Morphology And Tribological Performance Of Tisin-Ag Coating

Effect of Annealing Treatment on the Structure and Microhardness of Cold-Sprayed Nanostructured Feal/Wc Composite Coating

Study on cold sprayed Ag-Cu alloy coating

Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating

Formation of Fe-Al Intermetallic Compound Coating Through Cold Spraying

Influence of Feedstock in the Formation Mechanism of Cold-Sprayed Copper Coatings

The microstructure and properties of copper coating fabricated by high velocity arc spraying

Study on Microstructure and Properties of Cr3C2/Fe Coating Prepared by Arc Spraying on Copper Surface

Microstructure and Properties of Ag–SnO2 Materials with High SnO2 Content

Effect of Annealing Treatment on Formation of Intermetallic Phase in Cold-Sprayed Ni/Ti Mechanical Alloying Coating

Effect of Annealing on Microstructure of Cold Sprayed C-BNp/NiCrAl Composite Coating