Abstract:This paper presents a finite-element (FE) investigation on the bearing capacity of stainless steel hybrid tubular K-joints with square braces and circular chord. The nonlinear finite-element (FE) models were developed and validated against the test results available in the literature, which were then used to conduct a parametric study including 162 models. The parametric study results showed that the joint strengths of the stainless steel hybrid tubular gapped K-joints increased when the β and τ values increased and when the 2γ and e values decreased. On the other hand, the joint strengths of overlapped K-joints increased when the β, τ, and Ov values increased and when the 2γ values decreased. Furthermore, the bearing capacities obtained from the parametric study were compared with the design strengths calculated from the current design guidelines. The comparison showed that the current design rules of Chinese Code (GB 50017–2017) were generally un-conservative for stainless steel hybrid tubular K-joints. The coefficient of variations (COVs) obtained from the comparison of EC3 (2005), AS/NZS (2001) and GB 50017 (2017) were very large. However, the design strengths calculated from the International Committee for the Development and Study of Tubular Structures (CIDECT) were relatively close to the FE strengths. Therefore, modified design rules are proposed in this paper. New design formulas were developed by applying correction factors (ψg and ψo) to the current design rules of CIDECT (2008) for carbon steel CHS tubular K-joints, considering the effects of key geometric parameters of β, τ, 2γ and Ov, respectively. The proposed design rules can accurately predict the bearing capacity of stainless steel hybrid tubular K-joints with square braces and circular chord, being only 1% conservative to the FE strengths.

ANALYTICAL BEHAVIOUR OF CONCRETE-FILLED STEEL TUBULAR K-JOINT USING STAINLESS STEEL

Analytical Studies of Concrete-Filled Circular Steel Tubes under Axial Compression

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Numerical Behaviour Of Composite K-Joints Subjected To Combined Loading And Corrosive Environment

Design Of Concrete-Filled Steel Tubular Chs Connections In Tension

FE analysis of composite tubular K-joints subjected to static loading

Analytical Behaviour of CFDST Chord to CHS Brace Composite K-joints

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Concrete-Filled Steel and Steel Tubular T-Joints under Cyclic In-Plane Bending

Experiments on stainless steel hybrid K-joints with square braces and circular chord

Analytical Behavior of CFDST Stub Columns with External Stainless Steel Tubes under Axial Compression

Behaviour Of Concrete-Filled Tubular T-Joints Under In-Plane Bending Cyclic Loading

FINITE ELEMENT ANALYSIS ON CONCRETE-ENCASED CFST COLUMN TO REINFORCED CONCRETE BEAM JOINTS

Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS

Research on Behavior of the Joint with Concrete-filled Steel Tubular Column Under Pre-load in Steel Tube

Nonlinear analysis of concrete-filled square stainless steel stub columns under axial compression

BEHAVIOUR OF HYBRID STAINLESS-CARBON STEEL COMPOSITE BEAM-COLUMN JOINTS WITH BLIND BOLTS

Priliminary Research On Behavior Of Composite Joints With Cfst Column To Steel Beam Under Long-Term Loading

08.40: Numerical Investigation of Mechanical Properties of Multi‐planar Concrete‐filled Steel Tubular Joints

Behaviour of CFDST chord to CHS brace composite K-joints: Experiments