Abstract:To ascertain the influence of SiC nanowires on sintering kinetics of heterophase ceramics, two composite powders (TaSi2-TaC-SiC and TaSi2-TaC-SiC-SiCnanowire) are fabricated by mechanically activated combustion synthesis of Ta-Si-C and Ta-Si-C-(C2F4) reactive mixtures. Remarkable compressibility is achieved for the TaSi2-TaC-SiC-SiCnanowire composition (green density up to 84% as compared with 45.2% achieved for TaSi2-SiC-TaC) which is attributed to the lubricating effect of residual adsorbed fluorinated carbon (most likely C4F8). The outcomes of pressureless sintering of TaSi2-TaC-SiC and TaSi2-TaC-SiC-SiCnanowire compositions are vastly different; the former experiences no significant densification or grain growth and does not attain structural integrity, whereas the latter achieves relative density up to 93% and hardness up to 11 GPa. The SiC nanowires are not retained in consolidated ceramics, but instead, act as a sintering aid and promote densification and grain growth. Sintering mechanisms of TaSi2-TaC-SiC and TaSi2-TaC-SiC-SiCnanowire powders are analyzed using thermodynamic and ab initio grand potential calculations, as well as the analysis of grain size versus relative density relations. In the case of solid-state sintering, the densification and grain growth in heterophase non-oxide ceramics are governed by the same mechanisms as previously investigated single-phase oxides. The presence of SiC nanowires enhances grain-boundary related diffusion processes due to the high specific surface and aspect ratio of the nanowires. At 1500 °C, where the formation of the transient Si-based liquid phase is thermodynamically viable, only the SiC nanowire-containing composition demonstrated the intense grain coarsening and densification associated with liquid-assisted sintering. This effect can be attributed both to the presence of SiC nanowires and purification of residual oxide impurities due to C2F4-activated combustion synthesis employed for the in situ formation of SiC nanowires.

Necklace‐Like Silicon Carbide and Carbon Nanocomposites Formed by Steady Joule Heating

Carbon Welding by Ultrafast Joule Heating.

Synthesis of SiC@SiO2 Nanocables Via a Catalyst-Free Carbothermal Reduction Method

Carbide assisted in-suit growth and formation mechanism of SiC nanowires on the surface of defined carbon fibers

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Transient and in situ Growth of Nanostructured SiC on Carbon Fibers toward Highly Durable Catalysis

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites

Manipulation Of Phase And Microstructure At Nanoscale For Sic In Molten Salt Synthesis

In-situ synthesis of nano SiC particles in Al–Si–C system at 750 °C

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Synthesis of Ceramic Nanocomposite Powders with in Situ Formation of Nanowires/Nanobelts

Synthesis of Silicon Carbide Nano-Junctions in A Catalyst-Assisted Process

Carbothermally prepared nanophase SiC/ Si3N4 composite powders and densified parts

Features of Synthesizing Ceramic Composites Discretely Reinforced by Carbon Fibers and SiC Nanowires Formed in situ in the Combustion Wave

Effect of In Situ Grown SiC Nanowires on the Pressureless Sintering of Heterophase Ceramics TaSi2-TaC-SiC

Syntheses and Growth Mechanisms of 3C-Sic Nanostructures from Carbon and Silicon Powders.

Silicon oxycarbide composites reinforced with silicon nitride and in situ formed silicon carbide.

Synthesis of Carbon Nanotube Composites with Size-Controlled Silicon Nanoparticles

Fabrication of SiC ultrafine fiber with low oxygen content by electrospinning, thermal curing and pyrolysis of cyano-polycarbosilane