Abstract:A wavelength scanning interferometer for measuring the surface and thickness of a transparent film has been studied. A halogen light source combined with an acousto-optic tuneable filter is used to generate a sequence of filtered light in a Linnik interferometer, which leads to a sequence of interferograms captured by a CCD camera. When a transparent thin film is measured, the reflection signals from both the top and bottom surfaces of the film will interfere with the reference signal. At the same time, the multiple reflection signals between the two film surfaces will also interfere with each other. Effective separation of the interference signals from each other is the key to achieving a successful measurement. By performing a frequency-domain analysis, these interference signals can be separated. An optimized Fourier transform method is used in the analysis. Measurements of the top and bottom surface finishes of the film, as well as the film thickness map, have been achieved. The film needs to be more than 3 µm in optical path length, and must transparent with no absorption of light. The film's refractive index needs to be known as a function of wavelength. In this paper, the theoretical analysis and simulation study of wavelength scanning interferometry for transparent film measurement is discussed. Experiments on thin film layers of Parylene N coated on a glass slide surface are studied and analyzed. Comparison study results with other contact and non-contact methods are also presented.

Surface Measurement Through Transparent Medium Using Linnik Type White-Light Spectral Interferometer

Single point Linnik white-light spectral microscopic interferometer for surface measurement

White Light Microscopic Spectral Interferometric Measuring Method Based on Linnik Type

Fast Surface Measurement Using Wavelength Scanning Interferometry with Compensation of Environmental Noise

Near Common-Path Optical Fiber Interferometer for Potentially Fast On-Line Microscale-Nanoscale Surface Measurement

Measurement of the Group Refractive Index of Bulk Material Using White-Light Spectral Interferometry

Measurement of Absolute Phase Shift on Reflection of Thin Films Using White-Light Spectral Interferometry

Single-Shot White-Light Dispersive Interferometric Profilometer

High-accuracy Simultaneous Measurement of Surface Profile and Film Thickness Using Line-Field White-Light Dispersive Interferometer

Long-working-distance Linnik Microscopic Interferometry for Measuring the Surface Profile of Microstructures

Nonlinear Phase Error Analysis of Equivalent Thickness in a White-Light Spectral Interferometer

Film Thickness Measurement Based on Nonlinear Phase Analysis Using a Linnik Microscopic White-Light Spectral Interferometer

Surface and Thickness Measurement of a Transparent Film Using Wavelength Scanning Interferometry.

A New Method for Measuring Multilayer Thickness Using a Chromatic Confocal Sensor

White Light Interferometry with Spectral-Temporal Demodulation for Large-Range Thickness Measurement

Precision Measurement of Specular Surfaces Based on White Light Scanning Interference

Super-resolution spectral interference fitting method for the simultaneous measurement of the thin film thickness and surface profile

Vertical Scanning White Light Interfering Profilometer Based on Linnik Interference Microscope

Study of Thin Film Thickness Measurement Based on White Light Interference

Thin-film Thickness Absolute Measurement by Differential Optic-fiber White Light Interferometry

Scanning White-Light Interferometer for Measurement of the Thickness of a Transparent Oil Film on Water