Binder-free CuO Nanoneedle Arrays Based Tube-Type Sensor for H2S Gas Sensing

Qiang Hu,Wenjian Zhang,Xiaoyu Wang,Qiao Wang,Baoyu Huang,Yan Li,Xiaohui Hua,Guo Liu,Bingsheng Li,Jinyuan Zhou,Erqing Xie,Zhenxing Zhang

DOI: https://doi.org/10.1016/j.snb.2020.128993

IF: 9.221

2021-01-01

Sensors and Actuators B Chemical

Abstract:CuO nanoneedle arrays were directly prepared on the commercial ceramic tubes by magnetron sputtering and subsequent wet chemical etching and annealing. This brand-new fabrication of the tube-type gas sensor retains the high specific surface area of nanoneedle and avoids using binders that are generally used for coating gas-sensitive materials on the surface of the ceramic tube. The as-fabricated binder-free CuO nanoneedle arrays sensor exhibits a decent response of 76.50 % to 10 ppm H(2)Sat a low temperature of 150 degrees C. The response decreases to 20.27 % as the relative humidity increases from 40 % to 80 %. Moreover, the sensor shows good selectivity, reproducibility, and long-term stability to a low concentration of 10 ppm H2S. This superior sensing performance can be attributed to the abundant surface reactive adsorption sites provided by CuO nanoneedle arrays and the sensitization effect of p-p nano-homojunctions that arose from the interlaced CuO nanoneedles.