Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Extremely Sensitive and Accurate H2S Sensor at Room Temperature Fabricated with In-doped Co3O4 Porous Nanosheets

Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method.

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Room Temperature H2s Gas Sensing Properties of In2o3 Micro/Nanostructured Porous Thin Film and Hydrolyzation-Induced Enhanced Sensing Mechanism

CdS Quantum Dots Supported by Ultrathin Porous Nanosheets Assembled into Hollowed-out Co3O4 Microspheres: A Room-Temperature H2S Gas Sensor with Ultra-Fast Response and Recovery

Switching Effect of P-Cuo Nanotube/n-In2S3 Nanosheet Heterostructures for High-Performance Room-Temperature H2S Sensing

3D Porous MXene Nanosheet/SnO2 Nanoparticle Composites for H2S Gas Sensing

Switching Effect of p-CuO Nanotube/n-In 2 S 3 Nanosheet Heterostructures for High-Performance Room-Temperature H 2 S Sensing

The preparation of MOFs-derived ZnO/Co3O4 nanocages and its sensing performance to H2S

Preparation of a high-performance H2S gas sensor based on CuO/Co3O4 composite derived from bimetallic MOF

Sensitive Room-Temperature H2S Gas Sensors Employing SnO2 Quantum Wire/Reduced Graphene Oxide Nanocomposites

High Performance H2S Sensor Based on Ordered Fe2O3/Ti3C2 Nanostructure at Room Temperature

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Ultra-sensitive UV and H2S Dual Functional Sensors Based on Porous In2O3 Nanoparticles Operated at Room Temperature

Ultra-sensitive Room-Temperature H 2 S Sensor Using Ag–In 2 O 3 Nanorod Composites

Pd/Pt-Bimetallic-Nanoparticle-Doped In2O3 Hollow Microspheres for Rapid and Sensitive H2S Sensing at Low Temperature

Hydrothermally synthesized MXene Ti3C2/Zn2SnO4 based nanocomposite for H2S sensing at room temperature

Electrospun Cu-doped In2O3 hollow nanofibers with enhanced H2S gas sensing performance

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Ultra-efficient Room Temperature H2S Gas Sensor Based on NiCo2O4/r-GO Nanocomposites

ZnO-carbon Nanofibers for Stable, High Response, and Selective H2S Sensors.