Confidence Intervals for the Normal Multiple Correlation

C. Withers,S. Nadarajah

DOI: https://doi.org/10.1080/03610918.2013.835406

2015-04-14

Abstract:Improved confidence intervals are given for the normal multiple correlation. These are based on Cornish–Fisher and “small sample” asymptotic expansions for the distribution, quantiles, and density of and for the multiple correlation for a sample from a normal population.

What problem does this paper attempt to address?

Low detection based on Pd Pt /In2O3 nanospheres for rapid hydrogen detection

Yao Zhu,Xiaoning Meng,Xuhan Wang,Wei Gao

DOI: https://doi.org/10.1016/j.snb.2024.135654

2024-07-01

Abstract:Semiconductor gas sensors still have limitations in realizing rapid hydrogen measurement in lower hydrogen concentration environments. Therefore, in this paper, In2O3 cloud-like spherical hydrogen detection sensing materials with different Pd and Pt ratio loading were successfully prepared using the water bath method. The In2O3 sensing materials modified with noble metals Pd and Pt were designed for the rapid detection of hydrogen at 400 ppb with good selectivity under mixed gas components. The crystalline phase, morphology, and chemical composition of the prepared Pd and Pt-loaded In2O3 samples were analyzed using characterization techniques. The gas-sensing results showed that the In2O3 gas-sensing sensor with a Pd and Pt ratio loading of 1–2 had stronger H2 sensing performance at the optimum operating temperature (350°C). The response time and recovery time of In2O3 loaded with the opinion ratio at 350℃ and 400 ppb were 1 s and 15 s. The low detection limit was 400 ppb, with good repeatability and long-term stability. Finally, the enhanced gas sensitization mechanism of the In2O3 gas sensor loaded with Pd and Pt for H2 was discussed.

chemistry, analytical,electrochemistry,instruments & instrumentation
Stereopsis for verging systems

T. Olson

DOI: https://doi.org/10.1109/CVPR.1993.341001

1993-06-15

Abstract:The implications of vergence control and active vision for stereopsis in robots and humans are investigated. It is argued that the geometry of verging systems places strong constraints on the ecological role of stereopsis. In particular, stereopsis is poorly suited to building whole-field depth maps but well suited to gathering information about specific targets of interest in the scene in a coordinate frame referenced to the fixation point. A simple, fast stereo system targeted at the latter goal is presented.<<ETX>>
Bimetallic AuPt Alloy Nanoparticles Decorated on ZnO Nanowires Towards Efficient and Selective H2S Gas Sensing

Yiping Liu,Li-Yuan Zhu,Pu Feng,Congcong Dang,Ming Li,Hong-Liang Lu,Liming Gao

DOI: https://doi.org/10.1016/j.snb.2022.132024

2022-01-01

Abstract:The development of high-performance H2S sensor is imperative for monitoring H2S in the living environment. Metal oxide semiconductors (MOSs) have been regarded as the strongest candidates for H2S detection due to their high sensitivity, miniaturization, and good durability. However, a single MOS-based gas sensor is unable to selectively detect gases, which limits its practical application. Functionalization of noble metal nanoparticles (e. g., Pt, Pd, and Au) on the surface of MOS can improve its selectivity. Herein, ZnO nanowires decorated with AuPt bimetallic nanoparticles are designed and fabricated on MEMS for H2S detection. The AuPt@ZnO nanowiresbased sensor shows a response of 17.7-20 ppm H2S at 300 degrees C which is 4.0 times higher than that of pristine ZnO nanowires-based sensor. The sensor also exhibits a rapid response-recovery process, brilliant long-term stability, and excellent selectivity to H2S among various interfering gases. The remarkable improvement of the sensing performance, especially selectivity, could be ascribed to the electronic and chemical sensitization and the synergistic effect of the AuPt bimetal. Thus, the AuPt@ZnO nanowires-based sensor has a great potential application for H2S detection.
T‐Cell Receptor Alpha Haplotype influences Vα Epitope Expression on both Cortisone‐Resistant Thymocytes and Lymph Node T Cells

B. Bogen,L. Gleditsch,A. Teig

DOI: https://doi.org/10.1111/j.1365-3083.1993.tb01685.x

1993-06-01

Scandinavian Journal of Immunology

Abstract:We have previously described a mouse strain congenic for the T‐cell receptor alpha chain locus (Tcra). The strain, B10.D2.C‐Tcraa/Bo, carries the Tcraa haplotype of BALB/c instead of the Tcraa haplotype normally found in B10.D2. By comparing B10.D2.C‐Tcraa and B10.D2 mice, we now show that the Tcra haplotype influences the frequencies of Vα8 epitope expression on T cells detected by the novel B21.14 monoclonal antibody (MoAb). This finding agrees well with our previous observation that Tcra haplotype influences the frequencies of expression of two other Vα8 epitopes, detected by the KT50 and KT65 MoAbs. The specificities of the three Vα8‐specific MoAbs were compared by scatter diagram analysis of staining frequencies obtained in individual mice. The B21.14 and KT50 MoAbs appear to have very similar specificities; these two MoAbs stain slightly more αβ T cells than the KT65 MoAb. Investigations with another novel MoAb, the Vα2‐specific B20.1, revealed that the Tcra haplotype also influences the frequency of Vα2 epitope expression. The effect of the Tcra haplotype on Vα2 epitope expression was evident not only among lymph node T cells but also among mature, cortisone‐resistant thymocytes. Thus, the influence of the Tcra haplotype is imprinted already in the thymus. The most likely explanations for Tcra haplotype dependency of Vα epitope expression are differing numbers of Vα‐gene segment subfamily members and/or allelic polymorphism. The significance of Tcra haplotype‐dependent Vα epitope expression is discussed.
Synthesis and room-temperature H2S sensing of Pt nanoparticle-functionalized SnO2 mesoporous nanoflowers

Yu-Ping Sun,Yan-Fei Zhao,Hao Sun,Fu-Chao Jia,Parveen Kumar,Bo Liu

DOI: https://doi.org/10.1016/j.jallcom.2020.155813

IF: 6.2

2020-11-01

Journal of Alloys and Compounds

Abstract:Platinum nanoparticle (NP)-functionalized flower-like mesoporous SnO2 with a high specific surface area (31.6 m2g–1) and large pore diameter (32.5 nm) was synthesized using a double-template technique. The presence of Pt NPs was confirmed by X-ray photoelectron spectroscopy. Pt NPs with a size distribution of 2–4 nm were anchored on mesopores of the pre-synthesized three-dimensional SnO2 nanoflowers upon physical mixing. The resulting Pt NP-decorated three-dimensional SnO2 mesoporous nanoflowers were incorporated into a gas sensor to detect H2S. The Pt–SnO2 sensor exhibited enhanced gas sensing properties toward H2S, with a 100 ppb detection limit, fast response, low working temperature, excellent stability, and good selectivity. The 0.3 wt% Pt–SnO2 sensor exhibited a high response and excellent selectivity to H2S at room temperature (response value to 5 ppm H2S at 30 °C was 160). The significant improvements in gas sensing properties were attributed to the synergistic effect of the mesoporous nanostructure induced by the double-template method and the catalytic sensitization of the Pt NPs. These findings offer guidance for designing mesoporous materials and low-temperature H2S sensors.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Sihang Lu,Yuzhu Zhang,Jingyao Liu,Hua-Yao Li,Zhixiang Hu,Xie Luo,Naibo Gao,Bao Zhang,Jianjun Jiang,Aihua Zhong,Jingting Luo,Huan Liu

DOI: https://doi.org/10.1016/j.snb.2021.130334

2021-01-01

Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.
Pt Nanoparticle-Modified SnO<sub>2</sub>-ZnO Core-Shell Nanosheets on Microelectromechanical Systems for Enhanced H<sub>2</sub>S Detection

Xue-Yan Wu,Li-Yuan Zhu,Jie Sun,Kai-Yue Zhu,Xiao-Yong Miao,Meng-Yang Liu,Xue-Feng Zhao,Hong-Liang Lu

DOI: https://doi.org/10.1021/acsanm.2c00671

IF: 6.14

2022-01-01

ACS Applied Nano Materials

Abstract:Pt nanoparticle (NP)-modified SnO2-ZnO (SnO2-ZnO-Pt) core-shell nanosheets (NSs) for hydrogen sulfide (H2S) gas sensing were successfully synthesized via atomic layer deposition, hydrothermal method, and magnetron sputtering. More importantly, the SnO2-ZnO-Pt NS sensing materials were synthesized in situ on microelectromechanical system (MEMS) devices, which are expected to be high-performance gas sensors with superior sensitivity, great selectivity, good reproducibility, and low power consumption. To be specific, the SnO2-ZnO-Pt NSs displayed a high sensitivity (Ra/Rg) of 30.43 and an excellent selectivity when detecting 5 ppm H2S at an operating temperature of 375 degrees C. Their rate of resistance change was 29.43, which was about 24 and 9 times those of the pristine SnO2 NS (similar to 1.25) and SnO2-ZnO core-shell NS (similar to 3.43) sensors, respectively. These substantially improved sensing properties could be mainly attributed to the formation of heterojunctions, catalytic sensitization effect, and increased specific surface area of Pt NP modification. Thus, the proposed SnO2-ZnO-Pt NS gas sensors demonstrate great potential as a high-performance sensing material for application in H2S gas sensors.
CuO/WO3 hollow microsphere P-N heterojunction sensor for continuous cycle detection of H2S gas

Yang Wang,Shiyuan Zhang,Dongkun Xiao,Shijie Wang,Ting Zhang,Xue Yang,Shiquan Heng,Mojie Sun

DOI: https://doi.org/10.1016/j.snb.2022.132823

2023-01-01

Abstract:Hydrogen sulfide (H2S) is an extremely flammable and toxic gas. In this work, we have synthesized WO3 and CuO/WO3 composites for H2S detection using a simple hydrothermal method. The morphology, structure, chemical composition, and gas-sensitive properties of the samples are comprehensively characterized. The results show that the WO3 structure comprises of hierarchical hollow microspheres self-assembled by nanoparticles, and the CuO/WO3 composite retains the hollow microspherical structure of the pure WO3. Furthermore, the gas sensing performance of the CuO/WO3 sensor is significantly improved compared with that of WO3, with a response value of 1297 for 10 ppm H2S at an optimum operating temperature of 70 °C, which is nearly 103 times that of WO3 (12.5). It also exhibits a rapid response capability (13 s), lower detection limit (100 ppb), and excellent selectivity. In addition, the sensing mechanism of CuO/WO3 composites for H2S gas detection is analyzed in detail. The improved performance may be related to the morphological structure of the CuO/WO3 material and the formation of p-n heterojunction and CuS intermediates.
H2S-sensing properties of Pt-doped mesoporous indium oxide

Jinchun Tu,Nan Li,Xiaoyong Lai,Yue Chi,Yujie Zhang,Wei Wang,Xiaotian Li,Jixue Li,Shilun Qiu

DOI: https://doi.org/10.1016/j.apsusc.2010.03.055

IF: 6.7

2010-01-01

Applied Surface Science

Abstract:Pt-doped mesoporous indium oxide (In2O3) has been successfully obtained by a simple and effective in situ nanocasting method. The resultant samples were characterized by XRD, FE-SEM, TEM, N2 physisorption, XPS and EDX. The gas sensing properties for hydrogen sulfide (H2S) of the Pt-doped mesoporous In2O3 specimens were also examined. The results exhibit those In2O3 specimens possess much higher response to H2S even at low concentration of 2ppm and a lower optimum working temperature of 150°C. A possible mechanism was also provided to explain the improvement of the sensing properties.
Colloidal Synthesis of Tungsten Oxide Quantum Dots for Sensitive and Selective H2S Gas Detection

Haoxiong Yu,Zhilong Song,Qian Liu,Xiao Ji,Jianqiao Liu,Songman Xu,Hao Kan,Baohui Zhang,Jingyao Liu,Jianjun Jiang,Ling Miao,Huan Liu

DOI: https://doi.org/10.1016/j.snb.2017.03.044

IF: 9.221

2017-01-01

Sensors and Actuators B Chemical

Abstract:Tungsten oxide (WO3) has been intensely investigated as an important gas-sensing materials. Here the sensitive and selective H2S gas sensors based on WO3 quantum dots that were synthesized via a colloidal process using WCl6 ethanol solutions mixed with oleic acid and oleylamine were demonstrated. The solution processability of the colloidal WO3 quantum dots enabled a room-temperature sensor fabrication without high-temperature sintering. The optimal sensor response toward 50 ppm of H2S is 57 with the response time of 47 s, and the response was fully recoverable upon H2S release at 80 degrees C. The sensing mechanism was discussed by using first-principles calculation based on density functional theory (DFT). Their highly sensitive and fast response at lower operating temperature, combined with the benefit of ease fabrication, make the colloidal tungsten oxide quantum dots highly attractive for the construction of low cost gas sensor with reduced power consumption. (C) 2017 Published by Elsevier B.V.
Pt Nanoparticle-Modified SnO 2 –ZnO Core–Shell Nanosheets on Microelectromechanical Systems for Enhanced H 2 S Detection

Xue-Yan Wu,Li-Yuan Zhu,Jie Sun,Kai-Yue Zhu,Xiao-Yong Miao,Meng-Yang Liu,Xue-Feng Zhao,Hong-Liang Lu

DOI: https://doi.org/10.1021/acsanm.2c00671

IF: 6.14

2022-04-20

ACS Applied Nano Materials

Abstract:Pt nanoparticle (NP)-modified SnO2–ZnO (SnO2–ZnO–Pt) core–shell nanosheets (NSs) for hydrogen sulfide (H2S) gas sensing were successfully synthesized via atomic layer deposition, hydrothermal method, and magnetron sputtering. More importantly, the SnO2–ZnO–Pt NS sensing materials were synthesized in situ on microelectromechanical system (MEMS) devices, which are expected to be high-performance gas sensors with superior sensitivity, great selectivity, good reproducibility, and low power consumption. To be specific, the SnO2–ZnO–Pt NSs displayed a high sensitivity (R a/R g) of 30.43 and an excellent selectivity when detecting 5 ppm H2S at an operating temperature of 375 °C. Their rate of resistance change was 29.43, which was about 24 and 9 times those of the pristine SnO2 NS (∼1.25) and SnO2–ZnO core–shell NS (∼3.43) sensors, respectively. These substantially improved sensing properties could be mainly attributed to the formation of heterojunctions, catalytic sensitization effect, and increased specific surface area of Pt NP modification. Thus, the proposed SnO2–ZnO–Pt NS gas sensors demonstrate great potential as a high-performance sensing material for application in H2S gas sensors.

materials science, multidisciplinary,nanoscience & nanotechnology
Exploiting Free-Standing p-CuO/n-TiO 2 Nanochannels as a Flexible Gas Sensor with High Sensitivity for H 2 S at Room Temperature

Haoxuan He,Chenxi Zhao,Jing Xu,Kuanzhi Qu,Zhen Jiang,Zhida Gao,Yan-Yan Song

DOI: https://doi.org/10.1021/acssensors.1c01256

IF: 8.9

2021-08-31

ACS Sensors

Abstract:Hydrogen sulfide (H2S) is an extremely hazardous gas and is harmful to human health and the environment. Here, we developed a flexible H2S gas-sensing device operated at room temperature (25 °C) based on CuO nanoparticles coated with free-standing TiO2-nanochannel membranes that were prepared by simple electrochemical anodization. Benefiting from the modulated conductivity of the CuO/TiO2 p–n heterojunction and a unique nanochannel architecture, the traditional thermal energy was innovatively replaced with UV irradiation (λ = 365 nm) to provide the required energy for triggering the sensing reactions of H2S. Importantly, upon exposure to H2S, the p–n heterojunction is destroyed and the newly formed ohmic contact forms an antiblocking layer at the interface of CuS and TiO2, thus making the sensing device active at room temperature. The resulting CuO/TiO2 membrane exhibited a notable detection sensitivity for H2S featuring a minimum detection limit of 3.0 ppm, a response value of 46.81% against 100 ppm H2S gas, and a rapid response and recovery time. This sensing membrane also demonstrated excellent durability, long-term stability, and wide-range response to a concentration of up to 400 ppm in the presence of 40% humidity as well as outstanding flexibility and negligible change in electrical measurements under various mechanical stability tests. This study not only provides a new strategy to design a gas sensor but also paves a universal platform for sensitive gas sensing.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssensors.1c01256.Photographs; SEM images; XPS spectra; UV–vis absorption spectra; EDS spectra; XRD spectra; tables and resistance of TiO2 and CuO/TiO2 under different conditions (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary, analytical,nanoscience & nanotechnology
The use of antibiotics and antisera in the treatment of acute injuries.

W. Altemeier,R. Sherman

1954-06-01

Abstract:
H2S sensing material Pt-WO3 nanorods with excellent comprehensive performance

Xingyu Yao,Jinbo Zhao,Jiurong Liu,Fenglong Wang,Lili Wu,Fanjun Meng,Dashun Zhang,Rutao Wang,Jahangeer Ahmed,Kasinath Ojha

DOI: https://doi.org/10.1016/j.jallcom.2021.163398

IF: 6.2

2022-04-01

Journal of Alloys and Compounds

Abstract:The Pt-loaded WO3 materials have been synthesized via simple hydrothermal and chemical reduction methods. The microstructure of prepared Pt-WO3 exhibits as nanorods consisting of bundles of finer nanorods and the Pt nanoparticles with a size of ca. 5 nm loaded on the surface of WO3. The gas sensing measurements of Pt-WO3 material show excellent gas sensing selectivity to H2S compared with many other pollution gases (e.g. NO2, SO2, NH3, CO and CO2). In particular, 0.2 at% Pt-WO3 exhibits extremely high response (1638–10 ppm H2S), short response/recovery time (42 s/37 s) and low detection limit (1.27–5 ppb H2S) at 200 °C. The superior performance of 0.2 at% Pt-WO3 compared with pure WO3 mainly originate from its modulating action to conductive band electrons of WO3 and its catalysis to the chemisorption reaction on the surface.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Mechanism analysis of PtPd-decorated hexagonal WO3 nanorods for H2S sensing application with ppt-level detection limit

Yan Zhang,Jiangnan Chang,Yan Wang

DOI: https://doi.org/10.1016/j.jallcom.2021.162133

IF: 6.2

2022-02-01

Journal of Alloys and Compounds

Abstract:Compared with single metal modification, bimetal modification shows good gas sensing properties, but it should be further improved in terms of detection limit. In this work, the hexagonal WO3 (h-WO3) nanorods with Pt and Pd co-modification were synthesized via a simple method. The h-WO3 sensor has better gas sensitivity and selectivity to H2S gas. The response is 196.188 to 10 ppm H2S at 120 °C, which is 49.47 times that of the original h-WO3 (3.966). And the detection limit of the 3 sensor can reach the ppt level (as low as 506 ppt). The morphology of the composite material is characterized by SEM, TEM and HRTEM. The gas-sensing mechanism is carefully researched through XPS analysis. Compared with the pure h-WO3, the enhanced gas sensitivity of h-WO3 sensor is mainly ascribed to the synergistic effect between Pt and Pd.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Inhibiting Emulative Oxygen Adsorption via Introducing Pt-Segregated Sites into the Pd Surface for Enhanced H 2 Sensing in Air

Yurou Li,Yanfen Cao,Xin Jia,Yi Jiang,Zhenggang Xue,Jiaqiang Xu

DOI: https://doi.org/10.1021/acssensors.4c01622

IF: 8.9

2024-10-12

ACS Sensors

Abstract:Pd-modified metal sulfide gas sensors exhibit excellent hydrogen (H(2)) sensing activity through spillover effects. However, the emulative oxygen adsorption often occupies an exposed Pd surface and thus limits the effective Pd-H interaction, impeding the H(2) sensing performance in air. Herein, we develop an edge-rich Pt-shell/Pd-core structure to adjust the selective adsorption between oxygen and hydrogen for effective H(2) sensing in an air atmosphere. Detailedly, through accurately regulating...

chemistry, multidisciplinary, analytical,nanoscience & nanotechnology
3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Lu Tang,Huajing Wang,Zhenming Du,Chaoqi Zhu,Chaofan Ma,Dawen Zeng

DOI: https://doi.org/10.1021/acsanm.3c06279

IF: 6.14

2024-02-27

ACS Applied Nano Materials

Abstract:Due to the large band gap, most metal oxide semiconductor (MOS)-based gas sensors operate at high temperatures, which greatly limits their performance for gas sensing. In this work, we reported the successful synthesis of nanocomposites consisting of porous MXene nanosheets formed by the sublimation of sulfur and SnO2 nanoparticles (S-PM/SnO2). To prevent the restacking of MXene flakes under van der Waals force, a sacrificial S-template method was employed to transform MXene into a three-dimensional (3D) structure. The presence of MXene lowers the operating temperature. With a high response (∼30.6 – 10 ppm of H2S), rapid response speed (∼16.6 s – 50 ppm of H2S), high sensitivity (∼3.12 ppm–1), low detection limits (distinct response to 100 ppb H2S), and good selectivity at 100 °C, the sensor based on the optimal sample of S-PM/SnO2-6 demonstrates excellent H2S sensing performance. The improvement in H2S gas-sensing capacity can be attributed to the development of heterojunctions at the interface of porous MXene nanosheets (S-PM) and SnO2 nanoparticles (NPs). This leads to an enlarged surface depletion region and an elevated potential barrier, which significantly amplifies the range of resistance variation. These results suggest that S-PM/SnO2 nanocomposite has promising prospects in the realm of low-temperature and highly sensitive H2S detection.

materials science, multidisciplinary,nanoscience & nanotechnology
Pd nanoparticles decorated SnO 2 ultrathin nanosheets for highly sensitive H 2 sensor: Experimental and theoretical studies

Gaojie Li,Kai Du,Xinxin Wang,Xiaochen Wang,Boao Chen,Chuangwen Qiu,Jiaqiang Xu

DOI: https://doi.org/10.1016/j.ijhydene.2023.06.263

IF: 7.2

2023-07-12

International Journal of Hydrogen Energy

Abstract:This study is attempted to improve the hydrogen sensing performance of SnO 2 based sensors by simultaneously employing two strategies of morphology control and noble metal loading. Therefore, SnO 2 ultrathin nanosheets with thickness not exceeding 3.5 nm were successfully synthesized by a hydrothermal method and then different content of Pd nanoparticles were uniformly loaded onto SnO 2 surface by in situ reduction with ascorbic acid. The gas sensing properties demonstrated that the introduction of Pd not only altered the selectivity of the SnO 2 sensor from ethanol to hydrogen, but also significantly improved the gas sensitivity and reduced the working temperature. And the optimal 1.0%Pd/SnO 2 sensor owned the highest sensitivity (75), fastest response-recovery property (21 s/13 s) to 20 ppm of hydrogen at 220 °C, and the actual detection limit is as low as 0.1 ppm. Furthermore, 1.0%Pd/SnO 2 sensor exhibited excellent repeatability, reproducibility and acceptable anti-interference of humidity. The DFT studies suggest that the physisorption of the hydrogen molecules on the surface of SnO 2 , but chemisorption on the surface of Pd/SnO 2 . The improved H 2 sensing performance of Pd/SnO 2 sensor attributes its ultrathin thickness of SnO 2 and catalytic dissociation of Pd to O 2 and H 2 .

energy & fuels,electrochemistry,chemistry, physical
Room-Temperature Hydrogen Sulfide Sensor Based on Tributyltin Oxide Functionalized Perovskite CsPbBr 3 Quantum Dots

Husheng Shan,Wufan Xuan,Zhi Li,Dunan Hu,Xiuquan Gu,Sheng Huang

DOI: https://doi.org/10.1021/acsanm.2c00791

IF: 6.14

2022-05-03

ACS Applied Nano Materials

Abstract:Hydrogen sulfide (H2S) gas is one of the highly toxic, lethal, and corrosive gases in the environment that can cause a series of inimical effects after human exposure. Therefore, developing gas-sensitive nanomaterials that could effectively detect the ultralow concentration of H2S is of utmost significance. In this study, a perovskite quantum dot (QD) structure is synthesized through a simple solution method in which CsPbBr3 QDs are surface capped with tributyltin oxide (TBTO). It was employed as a chemiresistor to H2S, exhibiting exceptional repeatability, superior selectivity, and an ultralow limit of detection of 250 ppb with a response sensitivity of 0.58 at room temperature, which is the highest value for H2S sensors based on metal-halide perovskite structure. The response/recovery time is 278/730 s at a 100 ppm concentration of H2S. Furthermore, we proposed the sensing mechanism of dispersion-sensing effect of the metallo-organic ligand by theory calculation to explain the excellent response performance. The chemical adsorption sensitivity of the related chemical groups is amended when the metallo-organic molecular is engrossed on the surface of CsPbBr3 QDs and becomes an isolated ligand. Thus, the H2S molecule is first absorbed by the isolated TBTO molecule, which prevents H2S from penetrating the perovskite CsPbBr3, forming a Pb–S bond, and damaging the sensing performance. Meanwhile, the H2S adsorption also affects the charge distribution of the internal CsPbBr3 QDs through a metallo-organic TBTO molecule, enhancing the sensitivity and response to H2S. Overall, the nanomaterial’s structure and gas response mechanism could be extended to detecting other gases.

materials science, multidisciplinary,nanoscience & nanotechnology
Electrospun Cu-doped In2O3 hollow nanofibers with enhanced H2S gas sensing performance

Yu Zhang,Shuai Han,Mingyuan Wang,Siwei Liu,Guiwu Liu,Xianfeng Meng,Ziwei Xu,Mingsong Wang,Guanjun Qiao

DOI: https://doi.org/10.1007/s40145-021-0546-2

IF: 11.534

2022-01-06

Journal of Advanced Ceramics

Abstract:Abstract One-dimensional nanofibers can be transformed into hollow structures with larger specific surface area, which contributes to the enhancement of gas adsorption. We firstly fabricated Cu-doped In 2 O 3 (Cu-In 2 O 3 ) hollow nanofibers by electrospinning and calcination for detecting H 2 S. The experimental results show that the Cu doping concentration besides the operating temperature, gas concentration, and relative humidity can greatly affect the H 2 S sensing performance of the In 2 O 3 -based sensors. In particular, the responses of 6%Cu-In 2 O 3 hollow nanofibers are 350.7 and 4201.5 to 50 and 100 ppm H 2 S at 250 °C, which are over 20 and 140 times higher than those of pristine In 2 O 3 hollow nanofibers, respectively. Moreover, the corresponding sensor exhibits excellent selectivity and good reproducibility towards H 2 S, and the response of 6%Cu-In 2 O 3 is still 1.5 to 1 ppm H 2 S. Finally, the gas sensing mechanism of Cu-In2O3 hollow nanofibers is thoroughly discussed, along with the assistance of first-principles calculations. Both the formation of hollow structure and Cu doping contribute to provide more active sites, and meanwhile a little CuO can form p–n heterojunctions with In 2 O 3 and react with H 2 S, resulting in significant improvement of gas sensing performance. The Cu-In 2 O 3 hollow nanofibers can be tailored for practical application to selectively detect H 2 S at lower concentrations.

materials science, ceramics

Confidence Intervals for the Normal Multiple Correlation

Low detection based on Pd Pt /In2O3 nanospheres for rapid hydrogen detection

Stereopsis for verging systems

Bimetallic AuPt Alloy Nanoparticles Decorated on ZnO Nanowires Towards Efficient and Selective H2S Gas Sensing

T‐Cell Receptor Alpha Haplotype influences Vα Epitope Expression on both Cortisone‐Resistant Thymocytes and Lymph Node T Cells

Synthesis and room-temperature H2S sensing of Pt nanoparticle-functionalized SnO2 mesoporous nanoflowers

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Pt Nanoparticle-Modified SnO<sub>2</sub>-ZnO Core-Shell Nanosheets on Microelectromechanical Systems for Enhanced H<sub>2</sub>S Detection

CuO/WO3 hollow microsphere P-N heterojunction sensor for continuous cycle detection of H2S gas

H2S-sensing properties of Pt-doped mesoporous indium oxide

Colloidal Synthesis of Tungsten Oxide Quantum Dots for Sensitive and Selective H2S Gas Detection

Pt Nanoparticle-Modified SnO 2 –ZnO Core–Shell Nanosheets on Microelectromechanical Systems for Enhanced H 2 S Detection

Exploiting Free-Standing p-CuO/n-TiO 2 Nanochannels as a Flexible Gas Sensor with High Sensitivity for H 2 S at Room Temperature

The use of antibiotics and antisera in the treatment of acute injuries.

H2S sensing material Pt-WO3 nanorods with excellent comprehensive performance

Mechanism analysis of PtPd-decorated hexagonal WO3 nanorods for H2S sensing application with ppt-level detection limit

Inhibiting Emulative Oxygen Adsorption via Introducing Pt-Segregated Sites into the Pd Surface for Enhanced H 2 Sensing in Air

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Pd nanoparticles decorated SnO 2 ultrathin nanosheets for highly sensitive H 2 sensor: Experimental and theoretical studies

Room-Temperature Hydrogen Sulfide Sensor Based on Tributyltin Oxide Functionalized Perovskite CsPbBr 3 Quantum Dots

Electrospun Cu-doped In2O3 hollow nanofibers with enhanced H2S gas sensing performance