Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Carbon Nanotubes-Cuo/sno2 Based Gas Sensor for Detecting H2S in Low Concentration

A Highly Sensitive and Room Temperature CNTs/SnO 2 /CuO Sensor for H 2 S Gas Sensing Applications

Porous CuO/SnO2 Composite Nanofibers Fabricated by Electrospinning and Their H2S Sensing Properties

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Development of a novel H 2 S gas sensor based on CuO-doped SnO 2 hollow nanospheres

SnO2-inserted 2D Layered Ti3C2Tx MXene: from Heterostructure Construction to Ultra-High Sensitivity for Ppb-level H2S Detection

Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method.

Fast-response Hydrogen Sulfide Gas Sensor Based on Electrospinning Co3O4 Nanofibers-Modified CuO Nanoflowers: Experimental and DFT Calculation

Photoelectric H2S Sensing Based on Electrospun Hollow CuO-SnO2 Nanotubes at Room Temperature

Solution-Processed Gas Sensors Employing Sno2 Quantum Dot/Mwcnt Nanocomposites

3D Porous MXene Nanosheet/SnO2 Nanoparticle Composites for H2S Gas Sensing

Ultrasensitive and ultraselective detection of H 2 S using electrospun CuO-loaded In 2 O 3 nanofiber sensors assisted by pulse heating

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

CuO nanosheets for sensitive and selective determination of H2S with high recovery ability

Highly Selective Detection of Hydrogen Sulfide by Simple Cu-CNTs Nanocomposites

Preparation and Gas-Sensing Performances of ZnO/CuO Rough Nanotubular Arrays for Low-Working Temperature H2S Detection

Development of Sensors Based on CuO-doped SnO2 Hollow Spheres for Ppb Level H2S Gas Sensing

Synthesis and Low-Temperature Sensing Property of the Porous ZnCo2O4 Nanosheets

Room-Temperature Flexible CNT/Fe2O3 Film Sensor for ppb-Level H2S Detection

Ultra-fast and Low Detection Limit of H2S Sensor Based on Hydrothermal Synthesized Cu7S4-CuO Microflowers