Abstract:Abstract Several reagents were tested as possible future pre-treatments to hydrogen peroxide bleaching of discoloured paper with the goal of minimizing the degrading effect of hydrogen peroxide on cellulose. Two historic rag papers were used as testing substrate, one with high, the other with low levels of iron ion content. The two papers underwent the following test protocol: all samples were rinsed in deionized water for ten minutes. Samples were then divided to undergo seven different bleaching pre-treatments: (1) deacidification with calcium hydroxide solution at pH 9; (2) deacidification with magnesium hydrogen carbonate solution at pH 7.5; (3) hydrochloric acid (HCl, 0.1 M, pH 1) followed by deacidification with calcium hydroxide; (4) calcium phytate (1.75 mmol/L, pH 5.3) followed by deacidification with calcium hydroxide; (5) magnesium phytate (pH 6.5) followed by deacidification with magnesium hydrogen carbonate solution; (6) and (7) the chelating agent diethylene-triamine-pentaacetic acid (DTPA, 0.005 mol/L, pH 3) followed by deacidification either with calcium hydroxide or magnesium hydrogen carbonate. All samples were immersed in 3% hydrogen peroxide baths (pH 9, adjusted with calcium hydroxide). They were dynamically aged in a customized setup in a stack (20°C-80°C, three hour intervals, six weeks). The samples underwent analyses before treatment, after bleaching and after accelerated ageing. The molecular weight and carbonyl group content of the cellulose were determined with fluorescence labelling in combination with gel permeation chromatography (GPC-MALLS). Brightness reversion of the papers was determined by colourimetry. The iron content level was determined by inductively coupled plasma-mass spectrometry (ICP-MS) before and after treatment. The paper with low iron ion content did not benefit measurably from the pre-treatments, whereas the paper with high iron content benefited from some of the pre-treatments, as determined after accelerated aging. The least increase in carbonyl group content after accelerated ageing was achieved with calcium phytate (4); followed by magnesium phytate (5); and DTPA with magnesium hydrogen carbonate deacidification (7). The highest carbonyl group increase was caused by the calcium hydroxide pre-treatment (1). The Mw was best with the phytate-treated samples (4 and 5), followed by DTPA with magnesium hydrogen carbonate deacidification (7) and hydrochloric acid (3); the calcium-hydroxide deacidified sample showed the greatest Mw loss (1). All of tested iron removal and complexation treatments (3-7) diminished brightness reversion. DTPA (6 and 7) and hydrochloric acid (3) diminished the iron ion content of the high-iron-content paper by 30%. In sum, the tests 3-7 showed distinct benefits over deacidification alone (1 and 2) and may become viable as pre-treatment agents before hydrogen peroxide bleaching after further testing on object materials.

Effect of pH on deflaking rate, ink detachment and fragmentation during repulping of recycled paper

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Study of Sizing with Anionic Rosin Emulsion of the Recycled Paper Pulp

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

Control and Effects of pH of Printing and Dyeing Wastewater on Activated Sludge

Oxygen Delignification of Kraft Pulp of Whole Stalk Kenaf

The Influence of Polyether Structure on Deinking Efficiency

Analysis Of Electrochemical Character Affecting Deinking Efficiency Of Onp

Effects of Deinking Mode on Pore Structure and Crystallization Property of Recycled Fiber

Flotation de-inking for recycling paper: contrasting the effects of three mineral oil-free offset printing inks on its efficiency

Screening for Particular Pollutants in Regenerated Papermaking Wastewater and Study of Their Migration and Transformation

Effect of Different Acids on Acidolysis of Black Liquid from Paper Making

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

REMOVAL OF PARTICULAR POLLUTANTS IN PAPERMAKING WASTEWATER BY ADSORPTION-CATALYTIC OZONATION

Screening the Impact of Surfactants and Reaction Conditions on the De-Inkability of Different Printing Ink Systems for Plastic Packaging

The Influence and Mechanism of Influent Ph on Anaerobic Co-Digestion of Sewage Sludge and Printing and Dyeing Wastewater

Coagulation and ozonation treatment of biologically treated wastewater from recycled paper pulping industry: effect on the change of organic compounds

Comparative Study on the Treatment of Straw Pulping Black Liquid by Acid-Precipitation and Alkali-Precipitation

Reducing the Risks of Hydrogen Peroxide Bleaching in Presence of Iron Ions in Paper